NEMA C136 19-2011 For Roadway and Area Lighting Equipment - High-Pressure Sodium and Retrofit High-Pressure Sodium Lamps for Mercury Ballasts - Guide for Selection《道路和区域照明设备 汞镇流器用高.pdf

1、 ANSI C136.19-2011 American National Standard for Roadway and Area Lighting Equipment High-Pressure Sodium and Retrofit High-Pressure Sodium Lamps for Mercury Ballasts Guide for Selection ANSI C136.19-2011 Revision of ANSI C136.19-2004 (R2009) American National Standard for Roadway and Area Lighting

2、 Equipment High-Pressure Sodium and Retrofit High-Pressure Sodium Lamps for Mercury Ballasts Guide for Selection Secretariat: National Electrical Manufacturers Association Approved January 26, 2011 American National Standards Institute, Inc. ANSI C136.19-2011 NOTICE AND DISCLAIMER The information in

3、 this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this docum

4、ent. ANSI standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this pu

5、blication. While NEMA administers the process to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and g

6、uideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disc

7、laims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee t

8、he performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to p

9、erform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other

10、 standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document

11、. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to NEMA and is solely the responsibility of the cert

12、ifier or maker of the statement. ANSI C136.19-2011 AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established w

13、hen, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considere

14、d, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, process

15、es, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an Americ

16、an National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time

17、. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Ins

18、titute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 Copyright 2011 by National Electrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Co

19、nvention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the U

20、nited States of America i ANSI C136.19-2011 This page intentionally left blank. ii ANSI C136.19-2011 CONTENTS 1 Scope 1 2 Normative references1 3 Informative references 1 4 General description and information .1 Tables Table 1 Standard High-Pressure Sodium Lamps .3 Table 2 Retrofit High-Pressure Lam

21、ps4 Table 3 Non-Cycling High-Pressure Sodium Lamps 5 Table 4 Standby/Instant Restrike (Dual-Arc) High-Pressure Sodium Lamps.5 iii ANSI C136.19-2011 This page intentionally left blank. iv AMERICAN NATIONAL STANDARD ANSI C136.19-2011 For Roadway and Area Lighting Equipment High-Pressure Sodium and Ret

22、rofit High-Pressure Sodium Lamps for Mercury BallastsGuide for Selection 1 Scope This standard covers the selection of high-pressure sodium lamps recommended for use in roadway and area lighting equipment. 2 Normative references This standard incorporates by undated reference provisions from other p

23、ublications. These normative references are cited at the appropriate places in the text, and the publications are listed below. For undated references, the latest edition of the publication referred to applies (including amendments). ANSI C78.42-2001, American National Standard, High-Pressure Sodium

24、 Lamps ANSI C81.61-1990 (R1996), American National Standard for Electrical Lamp Bases ANSI C82.4-2002, American National Standard for Lamp BallastsBallasts for High-Intensity Discharge and Low-Pressure Sodium Lamps (Multiple-Supply Type) ANSI C82.7-1988, American National Standard, Specifications fo

25、r Mercury Lamp Transformers, Constant Current (Series) Supply Type NOTEANSI Standards are available from Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5776 Phone: 303/397-7956, Fax 303/397-2740, email: , or . 3 Informative references This standard is intended to be used in

26、 conjunction with the following publication. The latest edition of the publication applies (including amendments). ANSI C78.380-2002, American National Standard for High-intensity Discharge Lamps, Method of Designations 4 General description and information 4.1 High-pressure sodium lamps may be oper

27、ated on either series or multiple circuits with the use of the proper ballast. 4.2 The lamps in Tables 1 through 4 conform to the applicable requirements of ANSI C81.61 and ANSI C78.42. 4.3 Lamps listed in Table 1 are intended for use with ballasts meeting the requirements of ANSI C82.4, applying to

28、 ballasts for high-pressure sodium lamps. 4.4 Lamps listed in Table 2 are intended for use with ballasts meeting the requirements of ANSI C82.7, applying to ballasts for mercury lamps. 4.5 Lamps of other wattages and color in combination with the proper ballast and with the same dimensional characte

29、ristics may be used in the same equipment, provided the operating 1 ANSI C136.19-2011 temperature of the alternate lamp-ballast combinations do not exceed those of the lamp-ballast combinations used in the original equipment. 4.6 The user should consult their selected lamp manufacturer for type avai

30、lability and exceptions to the appropriate lamp information table. 4.7 Lamp bases of brass or a corrosion resistant alloy are recommended. Consult the manufacturer for availability. 2 ANSI C136.19-2011 Table 1 Standard High-Pressure Sodium Lamps Nominal Light Center Length Rated Watts Nominal Initia

31、l Lumens ANSI Code Bulb Millimeters Inches A. Standard LampsMogul Base Clear 50 4000 S68 ET23.5 127 5 70 6300 S63 ET23.5 127 5100 9400 S54 ET23.5 127 5 150/55 15800 S55 ET23.5 127 5150/100 16000 S56 BT28 127 5 200 21400 S66 ET18 146 5-3/4250 29000 S50 ET18 146 5-3/4 310 37000 S67 ET18 146 5-3/4400 5

32、0000 S51 ET18 146 5-3/4 600 90000 S106 T14.5 175 6-7/8750 105000 S111 BT37 178 7 1000 130000 S52 E25 222 8-3/4Diffuse 50 3700 S68 ET23.5 127 5 70 5800 S62 ET23.5 127 5100 8610 S54 ET23.5 127 5 150/55 14000 S55 ET23.5 127 5250 26000 S50 BT28 127 5 400 47500 S51 BT37 178 7B. Standard LampsMedium Base

33、Clear 35 2250 S76 E17 87 3-13/32 50 4000 S68 E17 87 3-13/3270 6300 S62 E17 87 3-13/32100 9500 S54 E17 87 3-13/32 150 15800 S55 E17 87 3-13/32Diffuse 35 2100 S76 E17 87 3-13/32 50 3800 S68 E17 87 3-13/3270 5950 S62 E17 87 3-13/32100 8800 S54 E17 87 3-13/32 150 14500 S55 E17 87 3-13/323 ANSI C136.19-2

34、011 Table 2 Retrofit High-Pressure Lamps Nominal Light Center Length Rated Watts Nominal Initial Lumens ANSI Lamp Code Millimeters Inches A. Retrofit LampsMogul Base B. Selected Mercury Lag, Reactor, and Constant Current Series Ballasts1Clear 150 13000 S63MG-150 127 5 215 20000 S65ML-215 127 5360 38

35、000 S64MJ-360 178 7 880 102000 Not assigned 241 9-15/32Diffuse 150 12000 S63MH-150 127 5 360 36000 S64MK-360 178 7C. Retrofit LampsMogul Base D. Selected Mercury Multiple Ballasts Without Peaking Capacitor Clear 150 15000 S63CE-150 145 5-23/32 220 25000 S65CI-220 150 5-29/32360 45000 S64CL-360 181 7

36、-1/8 940 130000 S93CN-940 241 9-1/2Diffuse 150 14500 S63CH-150 145 5-23/32 220 24000 S65CK-220 150 5-29/32360 43000 S64CM-360 181 7-1/8 940 123000 S93CP-940 241 9-1/21Consult the lamp manufacturer for the specific application. 4 ANSI C136.19-2011 Table 3 Non-Cycling High-Pressure Sodium Lamps Nomina

37、l Light Center Length Rated Watts Nominal Initial Lumens ANSI Lamp Code Bulb Millimeters Inches A. Non-Cycling Standard LampsMogul Base Clear 50 4000 S68 ET23.5 127 5 70 6300 S63 ET23.5 127 5100 10000 S54 ET23.5 127 5150/55 16000 S55 ET23.5 127 5 200 22000 S66 ET18 146 5-3/4250 28500 S50 ET18 146 5-

38、3/4310 37000 S67 ET18 146 5-3/4 400 49000 S51 ET18 146 5-3/41000 130000 S52 E25 222 8-3/4B. Non-Cycling Standard LampsMedium Base Clear 70 6300 S62 E17 84 3-7/16 100 10,000 S54 E17 87 3-4/16Table 4 Standby/Instant Restrike (Dual-Arc) High-Pressure Sodium Lamps Nominal Light Center Length Rated Watts Nominal Initial Lumens ANSI Lamp Code Millimeters Inches A. Standby/Instant Restrike LampsMogul Base Clear 50 3800 S68 127 5 70 6050 S63 127 5100 9500 S54 127 5 150/55 15700 S55 127 5200 21500 S66 146 5-3/4 250 27500 S50 146 5-3/4400 47500 S51 146 5-3/4 1000 127000 S52 222 8-3/4 5