NEMA C136 21-2014 Roadway and Area Lighting Equipment - Vertical Tenons Used with Post Top Cmounted Luminaires.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.21-2014Roadway and AreaLighting Equipment Vertical Tenons Usedwith Post TopmountedLuminairesANSI C136.21-2014 American National Standard for Roadway and Area Lighting Equipment Vertical Tenons Used with Post Topmounted

2、Luminaires Secretariat: National Electrical Manufacturers Association Approved: November 24, 2014 American National Standards Institute, Inc. 2014 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus

3、 of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. American National Standards Institute, Inc. (ANSI) standards a

4、nd guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA

5、 administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and

6、guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA dis

7、claims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee

8、the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to

9、perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and othe

10、r standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this documen

11、t. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the c

12、ertifier or maker of the statement. ANSI C136.21-2014 2014 National Electrical Manufacturers Association i AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by the American National Standards Institute, Inc. (ANSI) that the requirements for due process, conse

13、nsus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means significantly more t

14、han a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, wheth

15、er they have approved the standards or not, from: manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute, Inc., does not develop standards, and will under no circumstances give an interpretation of

16、any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute, Inc. Requests for interpretations should be addressed to the secretariat or sponsor whose name a

17、ppears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute, Inc., require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers

18、of American National standards may receive current information on all standards by calling or writing the American National Standards Institute, Inc. Published by National Electrical Manufacturers Association 1300 North 17th Street, Suite 900, Rosslyn, VA 22209 2014 National Electrical Manufacturers

19、 Association. All rights, including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American copyright conventions. No part of this publication may be reproduced

20、 in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America ANSI C136.21-2014 ii 2014 National Electrical Manufacturers Association Foreword At the time this standard was approved, the ANSI C136 committe

21、e was composed of the following members: Alabama Power Company American Electric Lighting Caltrans Ceravision City of Kansas City, Missouri City of Los Angeles, Bureau of Street Lighting Cree, Inc. Duke Energy Duke Energy Florida Eatons Cooper Lighting Edison Electric Institute EPRI EYE Lighting Int

22、ernational of N.A., Inc. Florida Power & Light Company FP Outdoor Lighting Controls FRE Composites (2005) Inc. GE Lighting Systems Georgia Power Company Gulf Power Company Hapco Aluminum Pole Products Holophane, An Acuity Brands Company Hubbell Lighting, Inc. Inovus Solar Intelligent Illuminations I

23、nc. Intertek USA, Inc. JEA Kauffman Consulting, LLC LED Roadway Lighting Ltd. LITES LUXIM Corp. Mississippi Power National Grid OSRAM SYLVANIA Inc. Philips HADCO Philips Lumec PNNL-Battelle ROAM/DTL SELC Lighting Sensus Metering Shakespeare Composite Structures Silver Spring Networks Sollux Consulti

24、ng South Carolina Electric & Gas SouthConn Technologies, Inc. Stresscrete/King Luminaire TE Connectivity Utility Metals Division of Fabricated Metals, LLC Valmont Industries, Inc. Vamas Engineering and Consultants Xcel Energy ANSI C136.21-2014 2014 National Electrical Manufacturers Association iii C

25、ontents Foreword . ii 1 Scope . 1 2 Informative References 1 3 Dimensional Requirements . 1 4 Material Requirements . 1 Figures Figure 1 Type 1 Tenon Profile and Dimensions 2 Figure 2 Type 2 Tenon Profile and Dimensions 3 ANSI C136.21-2014 iv 2014 National Electrical Manufacturers Association ANSI C

26、136.21-2014 2014 National Electrical Manufacturers Association 1 1 SCOPE This standard covers the attachment features of vertical tenons on pole tops or brackets used in roadway and area lighting that permit the interchangeability of post-topmounted luminaires. 2 INFORMATIVE REFERENCES This standard

27、 is intended for use in conjunction with the following American National standards. When these standards are superseded by a revision approved by the American National Standards Institute, Inc., the latest version shall apply. ANSI C136.16-2014, American National Standard for Roadway and Area Lighti

28、ng EquipmentEnclosed, Post Top-Mounted Luminaires ANSI C136.23-2012, American National Standard for Roadway and Area Lighting EquipmentEnclosed Architectural Luminaires ANSI C136.3-2005 (R2009), American National Standard for Roadway and Area Lighting EquipmentLuminaire Attachments ANSI C136.32-2012

29、, American National Standard for Roadway and Area Lighting EquipmentEnclosed Setback Luminaires and Directional Floodlights for High-intensity Discharge (HID) Lamps 3 DIMENSIONAL REQUIREMENTS The vertical tenon dimensions shall conform to the table in Figure 1 or Figure 2, whichever is applicable, o

30、r as specified by the user. Tenon shall allow proper clamping by the slipfitter. 4 MATERIAL REQUIREMENTS The exposed portion of the tenon for luminaire attachment shall be of a metallic material with a minimum of 0.125 in. (3.175 mm) wall thickness. ANSI C136.21-2014 2 2014 National Electrical Manuf

31、acturers Association 90 2 ,Ma x . C o m b in e dTo ta l 2 L ODCenterlineOuter Diameter (OD) Minimum Length (L) Inches Millimeters Inches Millimeters 2.38 (+0, -0.06) 60.3 (+0, -1.6) 4 101.6 2.88 (+0.06, -0.16) 73.0 (+1.6, -4) 4 101.6 4.0 (+0.06, -0.16) 101.6 (+1.6, -4) 13 330.2 Figure 1 Type 1 Tenon

32、 Profile and Dimensions ANSI C136.21-2014 2014 National Electrical Manufacturers Association 3 90 2 ,Ma x . C o m b in e dTo ta l 2 L ODCenterlineAW e ldOuter Diameter (OD) Length (L) Minimum (A) Inches Millimeters Inches Millimeters Inches Millimeters 2.38 (+0.03, -0.03) 60.3 (+0.8, -0.8) 4 (+0, -0

33、.13) 101.6 (+0, -3.2) 0.25 6.4 2.88 (+0.06, -0.16) 73.0 (+1.6, -4) 4 (+0, -0.13) 101.6 (+0, -3.2) 0.50 12.7 4.0 (+0.06, -0.16) 101.6 (+1.6, -4) 13 (+0, -0.13) 330.2 (+0, -3.2) 0.75 19.1 Figure 2 Type 2 Tenon Profile and Dimensions NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITwww.gLObAL.IhS.cOM OR cALL 1-800-854-7179/1-303-397-79565612_0514TB