NEMA C136 22-2004 Roadway and Area Lighting Equipment - Internal Labeling of Luminaires《道路和区域照明设备 灯具的内标签》.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.22-2004 (R2009, R2014)Roadway and Area Lighting Equipment Internal Labeling of LuminairesANSI C136.22-2004 (R2009, R2014) American National Standard for Roadway and Area Lighting Equipment Internal Labeling of Luminaire

2、s Secretariat: National Electrical Manufacturers Association Approved August 25, 2014 Published December 22, 2014 American National Standards Institute, Inc. C136.22-2004 (R2009, R2014) Page ii Copyright 2014 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this

3、 publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document.

4、American National Standards Institute (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an inter

5、est in the topic covered by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the so

6、undness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use

7、 of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular

8、purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on beh

9、alf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonab

10、le care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police

11、 or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attribut

12、able to NEMA and is solely the responsibility of the certifier or maker of the statement. C136.22-2004 (R2009, R2014) Page iii Copyright 2014 National Electrical Manufacturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANSI. ANSI states

13、that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Subs

14、tantial agreement means significantly more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence do

15、es not in any respect preclude anyone, whether they have approved the standards or not, from: manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards, and will under no cir

16、cumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the sec

17、retariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw t

18、his standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 Copyright 2014 by National El

19、ectrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of this

20、publication may be reproduced in any form, in an electronic retrieval system or otherwise, and without the prior written permission of the publisher. Printed in the United States of America. C136.22-2004 (R2009, R2014) Page iv Copyright 2014 National Electrical Manufacturers Association C136.22-2004

21、 (R2009, R2014) Page v Copyright 2014 by National Electrical Manufacturers Association TABLE OF CONTENTS FOREWORD vi 1 SCOPE . 1 2 NORMATIVE REFERENCES 1 3 PHYSICAL REQUIREMENTS 1 3.1 Dimensions 1 3.2 Materials 1 3.3 Method of attachment . 1 3.4 Locations of label(s) 2 4 IDENTIFICATION . 2 C136.22-2

22、004 (R2009, R2014) Page vi Copyright 2014 National Electrical Manufacturers Association FOREWORD At the time this standard was approved the ANSI C136 committee was composed of the following members: Alabama Power Company JEA American Electric Lighting Kauffman Consulting, LLC Caltrans LED Roadway Li

23、ghting Ltd. Ceravision LITES City of Kansas City, Missouri LUXIM Corp. City of Los Angeles, Bureau of Street Lighting Mississippi Power Cree, Inc. National Grid Duke Energy OSRAM SYLVANIA Inc. Duke Energy Florida Philips Eatons Cooper Lighting Business Philips Lumec Edison Electric Institute PNNL-Ba

24、ttelle EPRI ROAM/DTL EYE Lighting International of N.A., Inc. SELC Lighting Florida Power & Light Company Sensus Metering FP Outdoor Lighting Controls Shakespeare Composite Structures FRE Composites Silver Spring Networks GE Lighting Systems Sollux Consulting Georgia Power Company South Carolina Ele

25、ctric & Gas Gulf Power Company SouthConn Technologies, Inc. Hapco Aluminum Pole Products Stresscrete/King Luminaire Holophane An Acuity Brands Company TE Connectivity Hubbell Lighting, Inc. Utility Metals Division of Fabricated Metals, LLC Inovus Solar Valmont Industries, Inc. Intelligent Illuminati

26、ons Inc. Vamas Engineering and Consultants Intertek USA, Inc. Xcel Energy C136.22-2004 (R2009, R2014) Page 1 Copyright 2014 by National Electrical Manufacturers Association 1 SCOPE This standard covers internal luminaire identification labels for all styles of luminaires used for roadway lighting. 2

27、 NORMATIVE REFERENCES This standard is intended for use in conjunction with the following American National Standards. When the referenced standards are superseded by a revision approved by the American National Standards Institute, Inc. the latest revision shall apply. ANSI C136.9-2003, American Na

28、tional Standard for Roadway and Area Lighting Equipment Socket Support Assemblies for Metal Heads Mechanical Interchangeability ANSI C136.14-2004 (R2009), American National Standard for Roadway and Area Lighting Equipment Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity Dischar

29、ge Lamps ANSI C136.16-2009, American National Standard for Roadway and Area Lighting Equipment Enclosed Post Top-mounted Luminaires ANSI C136.18-2006, American National Standard for Roadway and Area Lighting Equipment High-mast Luminaires for Horizontal- and Vertical-burning High-intensity Discharge

30、 Lamps ANSI C136.23-2006, American National Standard for Roadway and Area Lighting Equipment Enclosed Architectural Luminaires ANSI C136.27-2005, American National Standard for Roadway and Area Lighting Equipment Tunnel Lighting Luminaires ANSI C136.32-2006, American National Standard for Roadway an

31、d Area Lighting Equipment Enclosed Setback Luminaires and Directional Floodlights for High-Intensity-discharge Lamps NOTE ANSI Standards are available from Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5776 Phone: 303/397-7956, Fax 303/397-2740, e-mail: or . 3 PHYSICAL RE

32、QUIREMENTS 3.1 Dimensions The label(s) shall be of sufficient size to clearly contain the information required in Section 4. 3.2 Materials The label(s) shall be made of non-corrosive material and shall be painted or otherwise processed to provide a durable legible surface that is designed to last du

33、ring the life of the luminaire. They shall also be designed to withstand the temperatures they will be subjected to during the normal operation of the luminaires for which they are intended. 3.3 Method of attachment The label(s) shall be permanently secured to the luminaire. If adhesive is used, it

34、shall be mildew resistant and shall have no staining effect on the material. C136.22-2004 (R2009, R2014) Page 2 Copyright 2014 National Electrical Manufacturers Association 3.4 Locations of label(s) The label(s) shall be located inside the luminaire housing in a location that is readily visible duri

35、ng field wiring of the luminaire. If the label(s) cannot be located inside the luminaire housing because of luminaire design, it shall be visible with a minimum removal of parts. 4 IDENTIFICATION The label(s) shall provide the following minimum information: a) Manufacturers name and catalog number b

36、) Month and year of manufacture c) Line input voltage d) Frequency if other than 60 hertz e) Ballast type (if applicable) (may be on ballast if readily visible) f) Photocontrol voltage if different from line input voltage g) Lamp type, wattage, and voltage (if applicable) (may be on ballast if readi

37、ly visible) h) Descriptive wiring diagram showing input terminals, ballast, capacitors, starting aid, photocontrol receptacle, lamp, and the like, as necessary. NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITwww.gLObAL.IhS.cOM OR cALL 1-800-854-7179/1-303-397-79565612_0514TB