NEMA C136 32-2012 For Roadway and Area Lighting Equipment C Enclosed Setback Luminaires and Directional Floodlights.pdf

1、NEMA Standards PublicationNational Electrical Manufacturers AssociationANSI C136.32-2012For Roadway and Area Lighting Equipment Enclosed Setback Luminaires and Directional FloodlightsANSI C136.32-2012 Revision of ANSI C136.32-2006 American National Standard For Roadway and Area Lighting Equipment En

2、closed Setback Luminaires and Directional Floodlights Secretariat: National Electrical Manufacturers Association Approved January 15, 2013 Published January 24, 2013 American National Standards Institute, Inc.ANSI C136.32-2012 Page ii Copyright 2012 by National Electrical Manufacturers Association N

3、OTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person partici

4、pating in the development of this document. American National Standards Institute (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seek

5、s out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any

6、 information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting fro

7、m the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill a

8、ny of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other

9、services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining th

10、e exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does

11、it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document

12、 shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C136.32-2012 Page iii Copyright 2012 by National Electrical Manufacturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANS

13、I. ANSI states that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected

14、interests. Substantial agreement means significantly more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; the

15、ir existence does not in any respect preclude anyone, whether they have approved the standards or not, from: manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards, and wi

16、ll under no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addre

17、ssed to the secretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise

18、, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 g164 Copyright

19、 2012 by National Electrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventio

20、ns. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, and without the prior written permission of the publisher. Printed in the United States of America. ANSI C136.32-2012 Page iv Copyright 2012 by National Electrical Manufacturers Association

21、 ANSI C136.32-2012 Page v Copyright 2012 by National Electrical Manufacturers Association TABLE OF CONTENTS FOREWORD. vi 1 SCOPE. 1 2 NORMATIVE REFERENCES 1 3 MOUNTING PROVISIONS. 2 4 SUPPLY CONNECTIONS 3 4.1 Terminal Blocks 3 4.2 Supply Leads 3 5 WIRING. 3 6 LATCHING AND HINGING. 3 7 VOLTAGE CLASSI

22、FICATION. 3 8 SOCKET/OPTICAL ASSEMBLY ELECTRICAL CONNECTOR 3 8.1 Sockets 3 8.2 Induction lamps. 3 8.3 Solid State Lighting Systems 4 9 REFRACTOR, LENS, OR LENS FRAME REPLACEMENT. 4 10 OPTICAL ASSEMBLY 4 11 GENERAL ELECTRICAL REQUIREMENTS. 4 11.1 Ba sic Insula tion Test (BIL) 4 11.2 Surge Test Wavefo

23、rm . 4 12 STARTER 4 13 BARRIERS 4 14 PHOTOCONTROL RECEPTACLE 4 15 MATERIALS AND PROTECTIVE COATINGS. 5 16 LABELING. 5 16.1 Internal 5 16.2 External. 5 17 GROUNDING 5 18 WEIGHT AND EFFECTIVE PROJECTED AREA 5 19 LIGHT DISTRIBUTION. 5 FIGURES 3-1 MOUNTING HOLE 2 TABLES 1 Outdoor Floodlight Luminaire De

24、signations 6 ANSI C136.32-2012 Page vi Copyright 2012 by National Electrical Manufacturers Association FOREWORD At the time this standard was approved, the ANSI C136 committee was composed of the following members: Acuity Brands Lighting Alabama Power Company American Electric Lighting Ceravision Ci

25、ty of Kansas City, Missouri Cooper Lighting Duke Energy Edison Electric Institute EPRI Florida Power and Light FRE Composites (2005) Inc. GE Lighting Solutions Georgia Power Company Gulf Power Company Hapco Holophane, An Acuity Brands Company Hubbell Lighting, Inc. Intelligent Illuminations Inc. Kau

26、ffman Consulting, LLC Lites Los Angeles City Bureau of Street Lighting National Grid Philips Hadco Philips Lumec PNNL Progress Energy Shakespeare Composite Structures South Carolina Electric the horizontal (H) value is always given first. Example: a luminaire whose horizontal beam is 125g113 and ver

27、tical beam is 75g113 would be classified as a type 6 x 5. Set-back luminaires shall have a roadway distribution classification designation as described in Appendix E of ANSI/IESNA RP8, which shall include vertical and lateral light distribution and control of distribution above maximum candlepower.

28、Example: a ANSI C136.32-2012 Page 6 Copyright 2012 by National Electrical Manufacturers Association luminaire whose designation is M-II-SC is one having a medium vertical light distribution, type II lateral distribution with semi-cutoff control. The light distribution characteristics of the luminair

29、e shall conform to the latest revision of ANSI/IESNA standards as follows IESNA-LM35-Approved Method: Photometric Testing of Floodlights using High Intensity Discharge or Incandescent Filament Lamps IESNA-LM79-Approved Method: Electrical and Photometric Measurements of solid State lighting Products

30、IESNA RP8-Recommended Practice for Roadway Lighting Table 1 Outdoor Floodlight Luminaire Designations Type Beam spread (g113) Beam description Minimum beam efficiency (%) 1 10 up to 18 Very narrow - 2 g33 18 up to 29 Narrow 30 3 g33 29 up to 46 Medium narrow 34 4 g33 46 up to 70 Medium 38 5 g33 70 up to 100 Medium wide 42 6 g33 100 up to 130 Wide 46 7 g33 130 and up Very wide 50 NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB