NEMA C136 41-2013 For Roadway and Area Lighting Equipment Dimming Control Between an External Locking Type Photocontrol and Ballast or Driver.pdf

1、 ANSI C136.41-2013 American National Standard For Roadway and Area Lighting Equipment Dimming Control Between an External Locking Type Photocontrol and Ballast or Driver ANSI C136.41-2013 American National Standard For Roadway and Area Lighting Equipment Dimming Control Between an External Locking T

2、ype Photocontrol and Ballast or Driver Secretariat: National Electrical Manufacturers Association Approved December 5, 2013 Published January 29, 2014 American National Standards Institute, Inc. ANSI C136.41-2013 Page ii 2014 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The in

3、formation in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development o

4、f this document. American National Standards Institute (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons

5、who have an interest in the topic covered by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any info

6、rmation or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the

7、 publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of

8、 your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other servi

9、ces for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exe

10、rcise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it un

11、dertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shal

12、l not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. ANSI C136.41-2013 Page iii 2014 National Electrical Manufacturers Association AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verification by ANSI. ANSI states tha

13、t the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substan

14、tial agreement means significantly more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does

15、not in any respect preclude anyone, whether they have approved the standards or not, from: manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards, and will under no circum

16、stances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secret

17、ariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw this

18、 standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 Copyright 2014 by National Elect

19、rical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of this pub

20、lication may be reproduced in any form, in an electronic retrieval system or otherwise, and without the prior written permission of the publisher. Printed in the United States of America. ANSI C136.41-2013 Page iv 2014 National Electrical Manufacturers Association ANSI C136.41-2013 Page v 2014 Natio

21、nal Electrical Manufacturers Association TABLE OF CONTENTS Foreword vi 1 Scope . 1 2 Normative References. 1 3 Informative References . 1 4 Definitions . 1 5 General Requirements 2 5.1 Background. 2 5.2 Dimming Standards 2 6 Mechanical Requirements . 3 6.1 Plug Type . 3 6.2 Receptacle Type 3 6.3 Vib

22、ration Test 3 7 Electrical Requirements. 4 7.1 Plug Type . 4 7.2 Receptacle Type 4 8 Marking Requirements 4 Figure 1 Limiting Dimensions For Spring Contact 4 Figure 2 Locking-Type Plug Dimensions Per Ansi C136.10 5 Figure 3 Locking-Type Receptacle Dimensions Per Ansi C136.10 . 6 Figure 4 Locking-Typ

23、e Receptacle Dimensions Per Ansi C136.10 . 7 Figure 5 Dimming Contact Pads, Minimum Size And Locations . 8 Figure 6 Example Photocontrol Base To the extent the above referenced patent application may ultimately issue as a patent containing any essential patent claims directed to the proposed standar

24、d, Acuity Brands will make a non exclusive, paid-up license to such essential patent claim(s) available to applicants desiring to utilize the patented invention for the purpose(s) of implementing the standard. As this patent license will be available without the requirement of any compensation or no

25、tification to Acuity Brands, we respectfully submit that it will therefore be available to applicants on reasonable terms and conditions which are demonstrably free of unfair discrimination. Please let us know if you have any questions concerning the terms of the proposed license for the patent application identified above. Thank you for your assistance in this matter. Sincerely, 7 Terry L. Utterbac , Vice President, ROAM and DTL Acuity Brands Technology Services, Inc.