NEMA C29 9-1983 Wet Process Porcelain Insulators Apparatus Post Type《湿法工艺制瓷绝缘子(柱状装置型)ANSI C29 9-1983 [代替 ANSI C29 9 ANSI C29 9]》.pdf

1、 ANSI/NEMA C29.9-1983 (R2002, R2012) American National Standard Wet Process Porcelain Insulators Apparatus, Post Type ANSI/NEMA C29.9-1983 (R2002, R2012) American National Standard Wet Process Porcelain Insulators Apparatus, Post Type Secretariat: National Electrical Manufacturers Association Approv

2、ed: August 2012 Published: July 2013 American National Standards Institute, Inc. NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does

3、 not necessarily mean that there is unanimous agreement among every person participating in the development of this document. American National Standards Institute (ANSI) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus

4、standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write

5、the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature wha

6、tsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information pu

7、blished herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In

8、 publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her ow

9、n independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to c

10、onsult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any cert

11、ification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement AMERICAN NATIONAL STANDARD Approval of an American National Standard requires verific

12、ation by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected i

13、nterests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their ex

14、istence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no c

15、ircumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the s

16、ecretariat or sponsor whose name appears on the title page of this standard. Caution Notice: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require that action be taken periodically to reaffirm, revise, or withdraw

17、 this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers Association 1300 North 17th Street, Rosslyn, VA 22209 Copyright 2013 by National

18、Electrical Manufacturers Association All rights reserved including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. No part of thi

19、s publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Printed in the United States of America. C29.9-1983 (R2002, R2012) Page i Copyright 2013 by National Electrical Manufacturers Association FOREWORD (This

20、 foreword is not part of American National Standard C29.9-1983 (R2002, R2012) The first edition of this standard was essentially based on the EEI-NEMA Standard Wet-Process Porcelain Insulators (Apparatus, Post Type), EEI TDJ-59, NEMA 147-1956. (EEI is the Edison Electric Institute; NEMA is the Natio

21、nal Electrical Manufacturers Association). It was developed by the American National Standards Committee on Insulators for Electric Power Lines, C29. This standard has been revised three times by the C29 Committee. This third revision (1) makes numerous editorial changes deemed to improve clarity; (

22、2) removes porcelain color as a requirement; (3) changes the test description for ferrous metal parts galvanizing; (4) moves packing requirements to an appendix; (5) requires electrical tests to be made on completely assembled insulators; (6) revises the mechanical proof test requirements; (7) incre

23、ases routine test values to 50 percent of rating; and (8) adds optional routine cantilever and bending movement tests. Suggestions for improvement of this standard will be welcome. They should be sent to the National Electrical Manufacturers Association, 1300 North 17th Street, Suite #1752, Rosslyn,

24、 VA 22209. This standard was processed and approved for submittal to ANSI by Accredited Standards Committee on Insulators for Electric Power Lines, C29. Committee approval of the standard does not necessarily imply that all committee members voted for approval. At the time it approved this standard,

25、 the ASC C-29 Committee had the following members: Rob Christman, Chairman Steve Griffith, Secretary Organization Represented: Name of Representative: Edison Electric Institute B. Freimark R. Christman E. Cleckley M. Garrels W. Avery J. Varner (alt) R. Kluge (alt) G. Obenchain (alt) Institute of Ele

26、ctrical and Electronic Engineers T. Grisham J. Hildreth A. Jagtiani J. Kuffel A. Phillips E. Gnandt (alt) National Electrical Manufacturers Association P. Maloney A. Baker R. A. Bernstorf G. Powell G. A. Stewart E. Kress (alt) Z. Lodi (alt) E. Niedospial (alt) A. Schwalm (alt) Tennessee Valley Autho

27、rity J. Nelson Western Area Power Administration R. Clark C29.9-1983 (R2002, R2012) Page ii Copyright 2013 by National Electrical Manufacturers Association C29.9-1983 (R2002, R2012) Page iii Copyright 2013 by National Electrical Manufacturers Association TABLE OF CONTENTS Page FOREWORD iv 1 SCOPE 1

28、2 DEFINITIONS 1 3 GENERAL . 1 4 MATERIAL 1 5 DIMENSIONS AND CHARACTERISTICS 2 6 MARKING 2 7 SAMPLING, INSPECTION, AND TESTS . 2 7.1 General .2 7.2 Design Tests . 2 7.2.1 Low-Frequency Wet Withstand . 2 7.2.2 Critical-Impulse Flashover, Positive . 2 7.2.3 Impulse Withstand . 2 7.2.4 Radio-Influence V

29、oltage 2 7.2.5 Compression Strength . 2 7.2.6 Thermal Shock 2 7.2.7 Torsional Strength . 3 7.3 Quality Conformance Tests . 3 7.3.1 Visual and Dimensional Tests . 3 7.3.2 Porosity Test 3 7.3.3 Galvanizing Test 3 7.3.4 Cantilever-Strength 3 7.3.5 Tensile Strength . 3 7.4 Routine Tests . 3 7.4.1 Mechan

30、ical Proof . 4 8 REFERENCED STANDARDS . 4 8.1 American National Standards . 4 8.2 Other Standard . 4 TABLES 1 Dimensions the catalog number, or class number; or description of the contents; and the manufacturers name. Appendix B Additional Electrical Design Tests If the following additional electric

31、al design tests are required, the procedure given in this Appendix may prove useful B1. Low-Frequency Dry Flashover Three insulators should be selected at random and tested in accordance with 4.2 of ANSI C29.1-1982 (R2012). The average dry-flashover value of the three insulators should be equal to o

32、r exceed 95 percent of the rated dry-flashover value of the insulator. B2. Low-Frequency Wet Flashover Three insulators should be selected at random and tested in accordance with 4.3 of ANSI C29.1-1982 (R2012). The average dry-flashover value of the three insulators should be equal to or exceed 90 p

33、ercent of the rated wet-flashover value of the insulator. B3. Critical Impulse Flashover - Negative Three insulators should be selected at random and tested in accordance with 4.7 of ANSI C29.1-1982 (R2012). The average critical impulse flashover, negative, value of the three insulators should be equal to or exceed 92 percent of the rated critical impulse flashover, negative value of the insulator.