NEMA C78 1431-1997 Electric Lamps-Slide Projector Lamps Condensing Dichroic Two-inch (51mm) Integral Reflector Rim Reference Tungsten- Halogen Lamps with GY 5 3 Bases《电灯 幻灯放映机灯 带GY.pdf

1、1(0$6WDQGDUGV3XEOLFDWLRQ1DWLRQDO(OHFWULFDO0DQXIDFWXUHUV$VVRFLDWLRQ$16, their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The Am

2、erican National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue an interpretation of an American National Standard in the name of the American National

3、 Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Insti

4、tute require that action be taken periodically to reaffirm, revise, or withdraw this standard. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards Institute. Published by National Electrical Manufacturers As

5、sociation 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 Copyright O 1997 National Electrical Manufacturers Association All rights reserved. No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without prior written permission of the publi

6、sher. Printed in the United Sates of America Copyright O 1997 by National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 First Edition May 1997 Copyright Q 1997 by Naonai Electrical Manufacturers Association - 1300 North 17th Street, Suite 1847. Roeslyn, V

7、A 22209 First Edition May 1997 ANSI C78.1431-1997 ConsolidatiordRevision of ANSI C78.1405-1991, ANSI C78.1422-1991, and ANSI C78.1423-1991 Foreword (This Foreword is not pari of ANSI c78.ii-im7.) This standard is both a consolidation of several existing standards for Photographic, Stage and Studio-

8、class lamps, and a revision of those individual standards. The intent is to group them into a single standard by their common factor: the base. Suggestions for improvement of this standard should be submitted to the Secretariat C78, National Electrical Manufacturers Association, 1300 North 17th Stre

9、et, Suite 1847, Rosslyn, VA 22209. This standard was processed and approved by Accredited Standards Committee on Electric Lamps, C78, and its Sub-Committee, C78-1 for Incandescent Lamps. Committee approval of the standard does not necessarily imply that all committee members voted for that approval.

10、 At the time it approved this standard, the C78 Committee had the following members: AI Rousseau, Chair, C78 AI Rousseau, Technical Coordinator Randolph N. Roy, Secretariat Jeanne L. Spicer, Coordinating Editor Organization Represented: Name of Representative: Advance Transformer Company Norman Grim

11、shaw Duro-Test Corporation . Larry Sheinberg Edison Electric Institute. . William Maguire (Delegate) Electrical Testing Laboratories . Craig Davenport General Electric . Cynthia Minshall Illuminating Engineering Society Rita M. Harrold National Electrical Manufacturers Association . (vacant) (Delega

12、te) OSRAM SYLVANIA INC. . Peter Bleasby Philips Lighting Company . AI Rousseau Underwriters Laboratories, Inc. David Belt At the time it approved this standard, the C78-1 Sub-Committee for Incandescent Lamps had the following members: Organization Represented: Name of Representative: Eastman Kodak C

13、ompany . William Moore GE Lighting . Bernard Rachel OSRAM SYLVANIA INC. . David Fox Philips Lighting Company . AI Rousseau Underwriters Laboratories, Inc. David Belt Cynthia Minshall (Alt.) Jeffrey Buschmann (Alt.) Ed Hinde (Alt.) Copyright O 1997 by National Electrical Manufacturers Association 130

14、0 North 17th Street, Suite 1847, Rosslyn, VA 22209 i First Edition May 1997 ANSI C78.1431-1997 ConsolidationFlevision of ANSI C78.1405-1991, ANSI C78.1422-1991, and ANSI C78.1423-1991 ii WgM Q 1997 by National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847, Rossiyn, VA 22209

15、 - First Edition May 1997 ANSI C78.1431-1997 ConsolidatiordRevision of ANSI C78.1405-1991, ANSI C78.1422-I 991, and ANSI C78.1423-1991 CONTENTS Clause Page Foreword iii 1 Scope ,.,. 1 2 Normative reference 1 3 Ratings . 1 4 Performance ,. 2 5 Restrictions 2 6 Cautionary notice . 2 7 Physical charact

16、eristics . . 2 8 Test procedures . 3 Annex A (Normative) A-1 Copyright O 1997 by National Electrical Manufacturers Association 13O North 17th Street, Suite 1847, Rocclyn, VA 22209 - iii First Edition May 1997 STDONEMA C78-1431-ENGL 3777 b470247 0533272 347 ANSI C78.1431-1997 ConsolidationlRevision o

17、f ANSI C78.1405-1991, ANSI C78.1422-1991, and ANSI C78.1423-1991 iv Copytight O 1997 by National Uectncal Manufacturers Association 1300 Mith 17th Street, Suite 1847, Rossiyn, VA 22209 - AMERICAN NATIONAL STANDARD ANSI Designation ELH ENG ENH C78.1431-1997 ConsolidatiodRevision of ANSI C78.1405-1991

18、, ANSI C78.1422-1991, and ANSI C78.1423-1991 Working Me Distance Correlated Color Watts Volts (hrs.1 (mm) Temperature (K) 300 120 35 152.4 3350 300 120 15 152.4 3450 250 120 175 152.4 3250 for electric lamps- Slide Projector Lamps - Condensing, Dichroic, Two-inch (51 mm), Integral Reflector, Rim Ref

19、erence with Tungsten - Halogen Lamps with GY53 Bases 1 scope This standard consolidates the lamps commonly used for slide projectors into a single standard. The lamps contained in this standard are not to be considered as interchangeable. Physically they will all fit the common socket used for these

20、 lamps. The photometry of each lamp is dependent upon the system for which it was designed and on the system in which it is used. A sample system and representative photometric values are found in the Annex. 2 Normative references lhe following standards contain provisions which, through reference i

21、n this text, constitute provisions of this American National Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and patties to agreements based on this American National Standard are encouraged to investigate the possibility of applying th

22、e most recent editions of the standards indicated below. ANSI C78.1413-1989 (R1 994), Dimensions and Centering Systems for Projection Lamps-Two-Inch (57mm) Integral-Reflector-im Reference Projection Lamps-Dimensions of Centering System ANSI C78.1450-1983 (R1994), Electric Lamps, Incandescent Project

23、ion Lamps, Method of Life Testing ANSI C81.61-1990 (R1996), Electric Lamps, Electric Lamp Bases ANSI ll7.201-1991, Audiovisual Systems-Slide Projectors and Filmstrip Projectors-Illumination Test IEC 682-1 980, Standard Method of Measurement of Pinch Temperature or Quartz-Tungsten-Halogen Lamps 3 Rat

24、ings This standard includes the following lamps: ELH, ENG, ENH. Table 1 - Lamp ratings Copyright O 1997 by National Electrical Manufacturers Association 1300 North 17th Street, Suite 1847. Rosslyn, VA 22209 - 1 First Edition May 1997 ANSI C78.1431-1997 ANSI C78.1422-1991 , and ANSI C78.1423-1991 Con

25、solidatiodRevision of ANSI C78.140!5-1991, Nominal ANSI Screen Illumination Designation (lumens) ELH 650 ENG 800 ENH 400 4 Performance Nominal Comer/Center Ratio (%) 50 50 50 NOTE: Therepresentavaiueswereobtainedwitha projectiaisystem as described inthe Annex Manufacturers may rate their products ba

26、sed on a different precon system, corisolt the manufecturer for details. 5 Restrictions: Operating Position . Base down to horizontal plus 15 degrees Temperature Limits . 400 degrees C maximum on seals 250 degrees C minimum on bulb Protective Shield See Cautionary Notice 6 Cautionary Notice To assur

27、e maximum safety during handling and use of the subject lamps, the following notices should be observed: 1. Tungsten-halogen lamps operate at high temperature and at intemal gas pressures above atmospheric pressure. Consequently, a lamp could shatter. Cettain lamps may also emit some amount of ultra

28、violet radiation. Therefore, a suitable protective shield, screening technique, or both shall be used with the luminaire to protect people and surroundings from both hazards. 2. Always read and observe the information contained in the lamp manufacture& caution notice. 7 Physical Characteristics Base

29、 specfcauons: GY5.3: see ANSI C81.61. Dimensions: General dimensions for this type of lamp are covered in ANSI C78.1413. 2 Copyright GI 1997 by Natknal UecMcai Manufacturers Association - 1300 North 17th Street, Suite 1847, Rosslyn, VA 2229 First Edition May 1997 ANSI C78.1431-1997 Concolidation/Rev

30、ision of ANSI C78.1405-1991, ANSI C78.1422-1991. and ANSI C78.1423-1991 8 Test Procedures Life . Open rack, horizontal burning position with cooling to maintain temperature limits in accordance with ANSI C78.1450. Illumination . See ANSI IT7.201. Seal Temperature Measurement procedure is defined in

31、IEC 682. Operating Temp. . Standard method of measuring other lamp operating temperatures (bulb and base) are under consideration. Copyright (4 1997 by National Eiectricai Manufacturers Association 1300 North 17th Street, Suite 1847, Rocslyn, VA 22209 3 First Edition May 1997 STD-NEMA C78-1q3L-ENGL

32、1777 b11702Y7 05132b T2 m ANSI C78.1431-1997 Consolidation/Revision of ANSI C78.1405-1991, ANSI C78.1422-1991, and ANSI C78.1423-1991 THIS PAGE INTENTIONALLY LEFT BLANK 4 ComM Q 1997 by National Eiectrical Manufacturem Associaibn - 1300 North 17th Street, Suite 1847, Rossiyn, VA 22209 First Edion Ma

33、y 1997 STDSNEMA CiB-Lq3L-ENGL 1777 m b470247 0513277 727 m ANSI C78.1431-1997 Consolidation/Revision of ANSI C78.1405-1991, ANSI C78.1422-1991, and ANSI C78.1423-1991 ANNEXES Copyright O 1997 by National Electtical Manufacturers Association 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 Firnt

34、 Edition May 1997 ANSI C78.1431-1997 ANSI C78.1422-1991, and ANSI C78.1423-I 991 ConsolidatiodRevision of ANSI C78.1405-1991, THIS PAGE INTENTIONALLY LEFT BLANK Copyright Q 1997 by National Eiecbical Manufacturers Association - 1300 North 17th Street, Suite 1847, Rasslyn, VA 22209 First Edition May

35、1997 1 1-Lamp 2-Heat Absorbing Glass 3-Biconvex Condenser Lens Focal Length 4-Film Plane: Aperture Size 5-Projection Lens Focal Length f/no. 6-Projected Image Plane Image Size ANSI C78.1431-1997 Consolidation/Revision of ANSI C78.1405-1991, ANSI C78.1422-1991, and ANSI C78.1423-1991 ELH ENG ENH 76.9

36、mm 76.9mm 76.9mm 23.01 mm x 23.01 mm x 23.01 mm x 34.1 1 mm 34.1 1 mm 34.1 1 mm 127mm f/3.5 127mm f/3.5 127mm W3.5 685mm x 1016mm 685mm x 1016mm 685mm x 1016mm ANNEX A (nomative) L M 2 34 152.4mm 152.4mm 152.4mm 24.3mm 24.3mm 24.3mm 5 Optical Axis - Light 6 Copyright Q 1997 by National Electrical Ma

37、nufacturers Acsociation - 1300 North 17th Street, Suite 1847, Rosslyn, VA 22209 A-1 First Edition May 1997 ANSI C78.1431-1997 Consolidation/Revision of ANSI C78.1405-1991, ANSI C78.1422-1991, and ANSI C78.1423-1991 THIS PAGE INTENTIONALLY LEFT BLANK A-2 Copyright Q 1997 by Nationai Eiectticai Manufa

38、cturers Association 1300 Nom 17th Street, Suite 1847, Rosslyn, VA 22209 First Edition May1997 NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB