NEMA NTCIP 1209 V02-2014 National Transportation Communications for ITS Protocol Object Definition for Electrical and Lighting Management Systems (ELMS) (Version V02).pdf

1、A Joint Publication of:American Association of State Highway and Transportation Officials (AASHTO) Institute of Transportation Engineers (ITE)National Electrical Manufacturers Association (NEMA)NTCIP Standards PublicationNTCIP 1209:2014 v02.18National TransportationCommunications for ITS ProtocolObj

2、ect Definitions for Transportation Sensor Systems (TSS)A Joint Standard of AASHTO, ITE, and NEMAA Joint Standard of AASHTO, ITE, and NEMA NTCIP 1209 version v02 National Transportation Communications for ITS Protocol Object Definitions for Transportation Sensor Systems (TSS) published in May 2014 Pu

3、blished by American Association of State Highway and Transportation Officials (AASHTO) 444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers (ITE) 1627 I (“Eye”) Street, N.W., Suite 600 Washington, D.C. 20006 National Electrical Manufacturers Associat

4、ion (NEMA) 1300 North 17th Street, Suite 900 Rosslyn, Virginia 22209-3801 file version 1209 v02.18 2014c 2014 AASHTO / ITE / NEMA. All rights reserved. NOTICES Copyright Notice 2014 by the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation En

5、gineers (ITE), and the National Electrical Manufacturers Association (NEMA). All intellectual property rights, including, but not limited to, the rights of reproduction, translation, and display are reserved under the laws of the United States of America, the Universal Copyright Convention, the Bern

6、e Convention, and the International and Pan American Copyright Conventions. Except as licensed or permitted, you may not copy these materials without prior written permission from AASHTO, ITE, or NEMA. Use of these materials does not give you any rights of ownership or claim of copyright in or to th

7、ese materials. Visit www.ntcip.org for other copyright information, for instructions to request reprints of excerpts, and to request reproduction that is not granted below. PDF File License Agreement To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of an Adobe Po

8、rtable Document Format (PDF) electronic data file (the “PDF file”), AASHTO / ITE / NEMA authorizes each registered PDF file user to view, download, copy, or print the PDF file available from the authorized website, subject to the terms and conditions of this license agreement: a) you may download on

9、e copy of each PDF file for personal, noncommercial, and intraorganizational use only; b) ownership of the PDF file is not transferred to you; you are licensed to use the PDF file; c) you may make one more electronic copy of the PDF file, such as to a second hard drive or burn to a CD; d) you agree

10、not to copy, distribute, or transfer the PDF file from that media to any other electronic media or device; e) you may print one paper copy of the PDF file; f) you may make one paper reproduction of the printed copy; g) any permitted copies of the PDF file must retain the copyright notice, and any ot

11、her proprietary notices contained in the file; h) the PDF file license does not include (1) resale of the PDF file or copies, (2) republishing the content in compendiums or anthologies, (3) publishing excerpts in commercial publications or works for hire, (4) editing or modification of the PDF file

12、except those portions as permitted, (5) posting on network servers or distribution by electronic mail or from electronic storage devices, and (6) translation to other languages or conversion to other electronic formats; i) other use of the PDF file and printed copy requires express, prior written co

13、nsent. Data Dictionary and MIB Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Data Dictionary (“DD”) or Management Information Base (“MIB”), AASHTO / ITE / NEMA extend the following permission: You may make or distribute unlimited c

14、opies, including derivative works, of the DD or MIB, including copies for commercial distribution, provided that: a) each copy you make or distribute includes the citation “Derived from NTCIP 0000 insert the standard number. Copyright by AASHTO / ITE / NEMA. Used by permission.”; b) the copies or de

15、rivative works are not made part of the standard publications or works offered by other standard developing organizations or publishers or as works-for-hire not associated with commercial hardware or software products intended for field implementation; c) use of the DD or MIB is restricted in that t

16、he syntax fields may only be modified to define: 1) a more restrictive subrange; or 2) a subset of the standard enumerated values; or 3) a set of retired and defined enumerated values for systems supporting multiversion interoperability; d) the description field may be modified but only to the exten

17、t that: 1) the more restrictive subrange is defined; and 2) only those bit values or enumerated values that are supported are listed. These materials are delivered “AS IS” without any warranties as to their use or performance. AASHTO / ITE / NEMA and their suppliers do not warrant the performance or

18、 results you may obtain by using these materials. AASHTO / ITE / NEMA and their suppliers make no warranties, express or implied, as to noninfringement of third party rights, merchantability, or fitness for any particular purpose. In no event will AASHTO / ITE / NEMA or their suppliers be liable to

19、you or any third party for any claim or for any consequential, incidental or special damages, including any lost profits or lost savings, arising from your reproduction or use of these materials, even if an AASHTO / ITE / NEMA representative has been advised of the possibility of such damages. Some

20、states or jurisdictions do not allow the exclusion or limitation of incidental, consequential, or special damages, or the exclusion of implied warranties, so the above limitations may not apply to a given user. Use of these materials does not constitute an endorsement or affiliation by or between AA

21、SHTO, ITE, or NEMA and the user, the users company, or the products and services of the users company. If the user is unwilling to accept the foregoing restrictions, he or she should immediately return these materials. PRL and RTM Distribution Permission To the extent that these materials are distri

22、buted by AASHTO / ITE / NEMA in the form of a Profile Requirements List (“PRL”) or a Requirements Traceability Matrix (“RTM”), AASHTO / ITE / NEMA extend the following permission: a) you may make or distribute unlimited copies, including derivative works of the PRL (then known as a Profile Implement

23、ation Conformance Statement (“PICS”) or the RTM, provided that each copy you make or distribute contains the citation “Based on NTCIP 0000 insert the standard number PRL or RTM. Used by permission. Original text AASHTO / ITE / NEMA.” b) you may only modify the PRL or the RTM by adding: 1) text in th

24、e Project Requirements column, which is the only column that may be modified to show a products implementation or the project-specific requirements; and/or 2) additional table columns or table rows that are clearly labeled as ADDITIONAL for project-unique or vendor-unique features; and c) if the PRL

25、 or RTM excerpt is made from an unapproved draft, add to the citation “PRL (or RTM) excerpted from a draft standard containing preliminary information that is subject to change.” This limited permission does not include reuse in works offered by other standards developing organizations or publishers

26、, and does not include reuse in works-for-hire, compendiums, or electronic storage devices that are not associated with procurement documents, or commercial hardware, or commercial software products intended for field installation. A PICS is a Profile Requirements List that is completed to indicate

27、the features that are supported in an implementation. Visit www.ntcip.org for information on electronic copies of the MIBs, PRLs, and RTMs. Content and Liability Disclaimer The information in this publication was considered technically sound by the consensus of persons engaged in the development and

28、 approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. AASHTO, ITE, and NEMA standards and guideline publications, of which the document contained herein is on

29、e, are developed through a voluntary consensus standards development process. This process brings together volunteers and seeks out the views of persons who have an interest in the topic covered by this publication. While AASHTO, ITE, and NEMA administer the process and establish rules to promote fa

30、irness in the development of consensus, they do not write the document and they do not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim lia

31、bility for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guarant

32、y or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performa

33、nce of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, AASHTO, ITE, and NEMA are not undertaking to render professional or other services for or on behalf of any person or entity, nor are AASHTO, ITE,

34、and NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstanc

35、es. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce co

36、mpliance with the contents of this document. AASHTO, ITE, and NEMA do not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safety-related information in this document shall not be attrib

37、utable to AASHTO, ITE, or NEMA and is solely the responsibility of the certifier or maker of the statement. Trademark Notice NTCIP is a trademark of AASHTO / ITE / NEMA. All other marks mentioned in this standard are the trademarks of their respective owners. NTCIP 1209 v02.18 Page i 2014 AASHTO / I

38、TE / NEMA Do Not Copy Without Written Permission ACKNOWLEDGEMENTS NTCIP 1209 v02 was prepared by the NTCIP Transportation Sensor Systems (TSS) Working Group, which is a subdivision of the Joint Committee on the NTCIP. The Joint Committee on the NTCIP is organized under a Memorandum of Understanding

39、among the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). The Joint Committee on the NTCIP consists of six representatives from each of the standards organizati

40、ons, and provides guidance for NTCIP development. At the time that NTCIP 1209 v02 was prepared, the following individuals were members of the NTCIP TSS Working Group: Ralph Boaz (Chair) Terry Haukom Kyle Irvin Allen Jacobs Peter Ragsdale Lynne Randolph Mike Robertson Robert Ung Keith Vennel Jo Versa

41、vel In addition to the many volunteer efforts, recognition is also given to those organizations that supported the efforts of the NTCIP TSS Working Group by providing comments and resources, including: U.S. Department of Transportation, Joint Program Office 3M Intelligent Transportation Systems Cali

42、fornia Department of Transportation Denver Regional Council of Governments Eberle Design, Inc. Electronic Integrated Systems, Inc. Federal Highway Administration Golden River Traffic, Ltd. Harris County Traffic June 2012 ITESoftware Standard; June 2011 NEMAStandard; April 2011 History A brief histor

43、y of NTCIP 1209 v02 follows: NTCIP 1209:2005 v01.19Between 1999 and 2002 , two user comment drafts were issued for review. In 2003, v01.18 was accepted as a Recommended Standard of the Joint Committee. In 2005, and after disposition of ballot comments, v01.18e was Jointly Approved. In November 2005,

44、 NTCIP 1209 v01.19 was published as NTCIP 1209:2005. NTCIP 1209 v02Between 2004 and 2007, the TSS WG developed drafts with additional Systems Engineering content, and support for machine vision detection technology. In August 2007, the User Comment Draft NTCIP 1209 v02.10 was issued for user review

45、and comment. In April 2008, after disposition of user comments, the NTCIP 1209 v02.15 was accepted as a Recommended Standard. In October 2010, after lifting a hold imposed by Normative References, NTCIP 1209 v02.17 was edited for SDO balloting and approval. In December 2010, NTCIP 1209 v02.17 was is

46、sued with NTCIP Standards Bulletin B0141. Following balloting and editing, NTCIP 1209 v02.18 was published. Compatibility of Versions To distinguish NTCIP 1209 v02 (as published) from previous drafts, NTCIP 1209 v02 also includes NTCIP 1209 v02.18 on each page header. All NTCIP Standards Publication

47、s have a major and minor version number for configuration management. The version number syntax is “v00.00a,“ with the major version number before the period, and the minor version number and edition letter (if any) after the period. NTCIP 1209 v02 is designated, and should be cited as, NTCIP 1209 v

48、02. Anyone using NTCIP 1209 v02 should seek information about the version number that is of interest to them in any given circumstance. The MIB, the PRL, and the PICS should all reference the version number of the standards publication that was the source of the excerpted material. NTCIP 1209 v02.18

49、 Page iv Do Not Copy Without Written Permission 2014 AASHTO / ITE / NEMA Conformant systems based on later, or higher, version numbers MAY NOT be compatible with conformant systems based on earlier, or lower, version numbers. Anyone using NTCIP 1209 v02 should also consult NTCIP 8004 v02 for specific guidelines on compatibility. NTCIP 1209 v02.18 Page v 2014 AASHTO / ITE / NEMA Do Not Copy Without Written Permission CONTENTS Page SECTION 1 GENERAL . 1 1.1 Scope . 1 1.2 References 1 1.2.1 Normative References 1 1.2.2 Other Referenc