NEMA NTCIP 2301-2010 National Transportation Communications for ITS Protocol Simple Transportation Management Framework (STMF) Application Profile (AP) (AP-STMF) (Version 02 19)《国家.pdf

1、A Joint Publication of:American Association of State Highway and Transportation Officials (AASHTO) Institute of Transportation Engineers (ITE)National Electrical Manufacturers Association (NEMA)NTCIP Standards PublicationNTCIP 2301:2010 v02.19National TransportationCommunications for ITS ProtocolSim

2、ple Transportation Management Framework (STMF) Application Profile (AP) (AP-STMF)A Joint Standard of AASHTO, ITE, and NEMAA Joint Standard of AASHTO, ITE, and NEMANTCIP 2301 version v02 National Transportation Communications for ITS Protocol Simple Transportation Management Framework (STMF) Applicat

3、ion Profile (AP) (AP-STMF) published in July 2010 Published by American Association of State Highway and Transportation Officials (AASHTO)444 North Capitol Street, N.W., Suite 249 Washington, D.C. 20001 Institute of Transportation Engineers (ITE)1099 14th Street, N.W., Suite 300 West Washington, D.C

4、. 20005-3438 National Electrical Manufacturers Association (NEMA)1300 North 17th Street, Suite 1752 Rosslyn, Virginia 22209-3801 file version 2301 v02.19p IHS-2010a g148 2010 AASHTO / ITE / NEMA. All rights reserved. Do Not Copy Without Written Permission 2010 AASHTO / ITE / NEMA NOTICESCopyright No

5、tice g148 2010 by the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). All intellectual property rights, including, but not limited to, the rights of reproductio

6、n, translation, and display are reserved under the laws of the United States of America, the Universal Copyright Convention, the Berne Convention, and the International and Pan American Copyright Conventions. Except as licensed or permitted, you may not copy these materials without prior written per

7、mission from AASHTO, ITE, or NEMA. Use of these materials does not give you any rights of ownership or claim of copyright in or to these materials. Visit www.ntcip.org for other copyright information, for instructions to request reprints of excerpts, and to request reproduction that is not granted b

8、elow. PDF File License Agreement To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of an Adobe Portable Document Format (PDF) electronic data file (the “PDF file”), AASHTO / ITE / NEMA authorizes each registered PDF file user to view, download, copy, or print the

9、PDF file available from the authorized Web site, subject to the terms and conditions of this license agreement: a) you may download one copy of each PDF file for personal, noncommercial, and intraorganizational use only;b) ownership of the PDF file is not transferred to you; you are licensed to use

10、the PDF file; c) you may make one more electronic copy of the PDF file, such as to a second hard drive or burn to a CD;d) you agree not to copy, distribute, or transfer the PDF file from that media to any other electronic media or device; e) you may print one paper copy of the PDF file; f) you may m

11、ake one paper reproduction of the printed copy; g) any permitted copies of the PDF file must retain the copyright notice, and any other proprietary notices contained in the file; h) the PDF file license does not include: 1) resale of the PDF file or copies, 2) republishing the content in compendiums

12、 or anthologies, 3) publishing excerpts in commercial publications or works for hire,4) editing or modification of the PDF file except those portions as permitted, 5) posting on network servers or distribution by electronic mail or from electronic storage devices, and 6) translation to other languag

13、es or conversion to other electronic formats; i) other use of the PDF file and printed copy requires express, prior written consent. PRL and RTM Distribution Permission To the extent that these materials are distributed by AASHTO / ITE / NEMA in the form of a Profile Requirements List (“PRL”) or a R

14、equirements Traceability Matrix (“RTM”), AASHTO / ITE / NEMA extend the following permission: a) you may make or distribute unlimited copies, including derivative works of the PRL (then known as a Profile Implementation Conformance Statement (“PICS”) or the RTM, provided that each copy you make or d

15、istribute contains the citation “Based on NTCIP 0000 insert the standard number PRL or RTM. Used by permission. Original text AASHTO / ITE / NEMA.”; b) you may only modify the PRL or the RTM by adding: 1) text in the Project Requirements column, which is the only column that may be modified to show

16、a products implementation or the project- 2010 AASHTO / ITE / NEMA Do Not Copy Without Written Permission specific requirements; and/or 2) additional table columns or table rows that are clearly labeled as ADDITIONAL for project-unique or vendor-unique features; and c) if the PRL or RTM excerpt is m

17、ade from an unapproved draft, add to the citation “PRL (or RTM) excerpted from a draft standard containing preliminary information that is subject to change.” This limited permission does not include reuse in works offered by other standards developing organizations or publishers, and does not inclu

18、de reuse in works-for-hire, compendiums, or electronic storage devices that are not associated with procurement documents, or commercial hardware, or commercial software products intended for field installation. A PICS is a Profile Requirements List that is completed to indicate the features that ar

19、e supported in an implementation. Visit www.ntcip.org for information on electronic copies of the MIBs, PRLs, and RTMs. Content and Liability Disclaimer The information in this publication was considered technically sound by the consensus of persons engaged in the development and approval of the doc

20、ument at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. AASHTO, ITE, and NEMA standards and guideline publications, of which the document contained herein is one, are developed thr

21、ough a voluntary consensus standards development process. This process brings together volunteers and seeks out the views of persons who have an interest in the topic covered by this publication. While AASHTO, ITE, and NEMA administer the process and establish rules to promote fairness in the develo

22、pment of consensus, they do not write the document and they do not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in their standards and guideline publications. AASHTO, ITE, and NEMA disclaim liability for any perso

23、nal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. AASHTO, ITE, and NEMA disclaim and make no guaranty or warranty, expre

24、ss or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. AASHTO, ITE, and NEMA do not undertake to guarantee the performance of any individua

25、l manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, AASHTO, ITE, and NEMA are not undertaking to render professional or other services for or on behalf of any person or entity, nor are AASHTO, ITE, and NEMA undertaking

26、 to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and

27、other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication.AASHTO, ITE, and NEMA have no power, nor do they undertake to police or enforce compliance with the con

28、tents of this document. AASHTO, ITE, and NEMA do not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safety-related information in this document shall not be attributable to AASHTO, ITE

29、, or NEMA and is solely the responsibility of the certifier or maker of the statement. Do Not Copy Without Written Permission 2010 AASHTO / ITE / NEMA Trademark Notice NTCIP is a trademark of AASHTO / ITE / NEMA. All other marks mentioned in this standard are the trademarks of their respective owner

30、s. NTCIP 2301 v02.19 Page i 2010 AASHTO / ITE / NEMA Do Not Copy Without Written Permission ACKNOWLEDGEMENTSNTCIP 2301 v02 was prepared by the NTCIP Base Standards and Profiles 2 Working Group (BSP2WG), which is a subdivision of the Joint Committee on the NTCIP. The Joint Committee is organized unde

31、r a Memorandum of Understanding among the American Association of State Highway and Transportation Officials (AASHTO), the Institute of Transportation Engineers (ITE), and the National Electrical Manufacturers Association (NEMA). The Joint Committee on the NTCIP consists of six representatives from

32、each of the standards organizations, and provides guidance for NTCIP development. When NTCIP 2301 v02 was prepared, the following individuals were members of the NTCIP BSP2WG: g120 Ralph Boaz g120 Bob De Roche (Chairperson) g120 Bud Kent g120 Robert Lopes g120 Greg Mizell g120 Alex Mousadi g120 Pete

33、r Ragsdale g120 Robert Rausch g120 Joerg “Nu” Rosenbohm Other individuals providing input to NTCIP 2301 v02 include: g120 Blake Christie g120 Manny Insignares g120 Jean Johnson g120 Jim Mahugh g120 Vicki Schofield g120 Ken Vaughn In addition to the many volunteer efforts, recognition is also given t

34、o those organizations who supported the efforts of NTCIP BSP2WG by providing comments and funding, including: g120 U.S. Department of Transportation, Research and Innovative Technology Administration, ITS Joint Program Office g120 ConSysTec g120 Econolite Control Products, Inc. g120 Florida DOT g120

35、 National Electrical Manufacturers Association g120 Noblis, Inc. g120 Pillar Consulting, Inc g120 Quixote Traffic Corporation g120 Robert De Roche Consulting g120 Siemens ITS g120 Telvent Farradyne Inc. g120 Transcore, Inc. g120 Trevilon Corp. g120 URS Corp. g120 Washington State DOT NTCIP 2301 v02.

36、19 Page iiDo Not Copy Without Written Permission 2010 AASHTO / ITE / NEMA FOREWORDNTCIP 2301 v02, an NTCIP standards publication, defines an application profile (AP) that is a combination of standards intended to meet specific requirements for information management and information transfers to and

37、from transportation devices in a networked environment. As an NTCIP application profile, the scope covers the application, presentation, and session layers of the OSI Basic Reference Model. NTCIP 2301 v02 contains mandatory requirements that are applicable to all devices claiming conformance to NTCI

38、P 2301 v02. NTCIP 2301 v02 also contains optional and conditional requirements, which may be applicable to a specific environment in which a device is used. NTCIP 2301 v02 uses only metric units. Annex A includes mandatory requirements that are defined as normative. For more information about NTCIP

39、standards publications, visit the NTCIP Web site at www.ntcip.org.User Comment Instructions The term “User Comment” includes any type of written inquiry, comment, question, or proposed revision, from an individual person or organization, about any part of this standards publications content. A “Requ

40、est for Interpretation” of this standards publication is also classified as a User Comment. User Comments are solicited at any time. In preparation of this NTCIP standards publication, input of users and other interested parties was sought and evaluated. All User Comments will be referred to the com

41、mittee responsible for developing and/or maintaining this standards publication. The committee chairperson, or their designee, may contact the submitter for clarification of the User Comment. When the committee chairperson or designee reports the committees consensus opinion related to the User Comm

42、ent, that opinion will be forwarded to the submitter. The committee chairperson may report that action on the User Comment may be deferred to a future committee meeting and/or a future revision of the standards publication. Previous User Comments and their disposition may be available for reference

43、and information at www.ntcip.org.A User Comment should be submitted to this address: NTCIP Coordinator National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn, Virginia 22209-3801 e-mail: ntcipnema.orgA User Comment should be submitted in the following form: Standard

44、s Publication number and version: Page:Section, Paragraph, or Clause: Comment: Editorial or Substantive?: Suggested Alternative Language: Please include your name, organization, and address in your correspondence. NTCIP 2301 v02.19 Page iii 2010 AASHTO / ITE / NEMA Do Not Copy Without Written Permis

45、sion Approvals NTCIP 2301 v02 was separately balloted and approved by AASHTO, ITE, and NEMA after recommendation by the Joint Committee on the NTCIP. Each organization has approved NTCIP 2301 v02 as the following standard type, as of the date:AASHTOStandard Specification, May 2010 ITESoftware Standa

46、rd, June 2010 NEMAStandard, November 2009 History From 1998 to 1999, a predecessor of NTCIP 2301 v02 was referenced as TS 3.AP-STMF. However, as part of an organized numbering scheme for NTCIP standards publications, the designation NTCIP 2301 v02 was developed. The technical specifications of NTCIP

47、 2301 v02 are identical to the former reference, except as noted in the development history: TS 3.AP-STMF v98.01.07. August 1998Accepted as a User Comment Draft by the Joint Committee on the NTCIP. October 1998NTCIP Standards Bulletin B0025 referred version 98.01.08 for comment. NTCIP 2301 v99.01.07

48、. July 1999Accepted v99.01.06 as a Recommended Standard by the Joint Committee on the NTCIP. January 2000NTCIP Standards Bulletin B0044 referred v99.01.07, which included typographic corrections. Approved by AASHTO in May 2000, and approved by ITE and NEMA in May 2001. NTCIP 2301:2001 v01.08. Decemb

49、er 2001Reformatted for printing: incremented version number and updated date; modified and reorganized front matter to conform to NTCIP 8002; and updated headers, footers, and page numbers. All references to TS 3 Standard designations were changed to equivalent NTCIP designations. NTCIP 2301 v02.01. January 2002Initial draft of NTCIP 2301 version 02 started. NTCIP 2301 v02.12. February 2006Accepted as a User Comment Draft by the Joint Committee. December 2006Issued for review and comment via Standards Bulletin B0113. NTCIP 2301 v02.16. March 2008Updated refer