1、NEMA Standards PublicationNational Electrical Manufacturers AssociationNEMA TC 14.BG-2015Belowground Reinforced Thermosetting Resin Conduit (RTRC) and FittingsNEMA Standards Publication TC 14.BG-2015 Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings Published by National Electri
2、cal Manufacturers Association 1300 North 17th Street, Suite 900 Rosslyn, Virginia 22209 www.nema.org 2015 National Electrical Manufacturers Association. All rights, including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection
3、of Literary and Artistic Works, and the International and Pan American copyright conventions. 2015 National Electrical Manufacturers Association NOTICE AND DISCLAIMER The information in this publication was considered technically sound by the consensus of persons engaged in the development and appro
4、val of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. The National Electrical Manufacturers Association (NEMA) standards and guideline publications, of which the do
5、cument contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the topic covered by this publication. While NEMA administers the process and establishes r
6、ules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of any judgments contained in its standards and guideline publications. NEMA disclaims lia
7、bility for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, application, or reliance on this document. NEMA disclaims and makes no guaranty or warranty,
8、express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or needs. NEMA does not undertake to guarantee the performance of any individual manufact
9、urer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any person or entity, nor is NEMA undertaking to perform any duty owed by any person or ent
10、ity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. Information and other standards on the topic covered by this p
11、ublication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce compliance with the contents of this document. NEMA does not certify, test, or inspect
12、 products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health- or safety-related information in this document shall not be attributable to NEMA and is solely the responsibility of the certifier or maker of the statement. NEMA T
13、C 14.BG-2015 Page i 2015 National Electrical Manufacturers Association Foreword NEMA TC 14.BG-2015 is an adoption of the most recent publication of CAN/CSA C22.2 No. 2420-09ANSI/UL 2420, Edition 1, Standard for Safety for Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings. TC 14.
14、BG-2015 supersedes the portions of TC 14-2002 relevant to Belowground RTRC and fittings. User needs and safety considerations were addressed during the preparation of NEMA TC 14.BG, which was undertaken by a subgroup of the NEMA Polymer Raceway Products Sections Technical Committee. During the prepa
15、ration phase, the following were active participants: Benoit ArsenaultFRE Composites Les EasterAllied Tube and Conduit, a part of Atkore International Chris GreeneUnderground Devices, Inc. Rachel GuentherThomas & Betts, a member of the ABB Group David KendallThomas & Betts, a member of the ABB Group
16、 Andrew NauseIPEX Management, Inc. Kyle OwensChampion Fiberglass Greg SkaperPanduit Corporation Fred SmallHubbell Incorporated Kevin VyasAnamet Electrical, Inc. NEMA TC 14.BG was approved by the NEMA Polymer Raceway Products Section. Approval does not necessarily imply that all members of the Sectio
17、n voted for its approval. At the time of approval, the Section consisted of the following members: Anamet Electrical, Inc.http:/Mattoon, IL AFC Cable Systems, a part of Atkore INew Bedford, MA Allied Tube and Conduit, a part of Atkore IHarvey, IL Champion Fiberglass, ISpring, TX Electri-Flex CRosell
18、e, IL FRE Composites (2005) ISt. Andre-dArgenteuil, PQ, Canada Hubbell IShelton, CT IPEX Management, IMississauga, ON, Canada Legrand North Americawww.legrand.usWest Hartford, CT Panduit CTinley Park, IL Royal Building PShelby Township, MI Southern Pipe, Inc.www.southern-New London, NC Southwire CCa
19、rrollton, GA Thomas & Betts, a member of the ABB GMemphis, TN Underground Devices, INorthbrook, IL United Fiberglass of ASpringfield, OH The NEMA Polymer Raceway Products Section will periodically review this standard and revise the adoptions or modifications as necessary. Proposed or recommended re
20、visions can be submitted to: Director, Industry Operations National Electrical Manufacturers Association 1300 North 17th Street, Suite 900 Rosslyn, Virginia 22209 NEMA TC 14.BG-2015 Page ii 2015 National Electrical Manufacturers Association NEMA TC 14.BG-2015 Page 1 2015 National Electrical Manufact
21、urers Association Section 1 SCOPE NEMA TC 14.BG is an Adoptive Standard for Reinforced Thermosetting Resin Conduit (RTRC) and RTRC fittings as covered in the most recent publication of CAN/CSA C22.2 No. 2420-09ANSI/UL 2420, Edition 1. Section 2 REQUIREMENTS 2.1 ALL BELOWGROUND REINFORCED THERMOSETTI
22、NG RESIN CONDUIT AND FITTINGS The most current publication of CAN/CSA C22.2 No. 2420-09ANSI/UL 2420, Edition 1, is adopted in its entirety for all Belowground Reinforced Thermosetting Resin Conduit and RTRC fittings. NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION 1300 NORTH 17TH STREET, SUITE 900 ROSSLYN. VA 22209www.NEMA.orgTO ORDER ADDITIONAL NEMA STANDARDS VISITWWW.GLOBAL.IHS.COM OR CALL 1-800-854-7179/1-303-397-79565612_0514TB
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1