NF E22-383-1998 Rolling bearings Needle rollers Dimensions and tolerances 《滚动轴承 滚针轴承 尺寸和公差》.pdf

相关资源

JIS B0124-2009 滚动轴承量值符号.pdf

JJF 1089-2002 滚动轴承径向游隙测量仪校准规范.pdf

JB T 1255-2001 高碳铬轴承钢滚动轴承零件 热处理技术条件.pdf

JB T 1255-2014 滚动轴承高碳铬轴承钢零件 热处理技术条件.pdf

JB T 1460-2002 高碳铬不锈钢滚动轴承零件 热处理技术条件.pdf

JB T 1460-2011 滚动轴承 高碳铬不锈钢轴承零件 热处理技术条件.pdf

JB T 11841-2014 滚动轴承零件金属实体保持架 技术条件.pdf

JB T 10336-2002 滚动轴承及其零件补充技术条件.pdf

JB T 10337-2002 滚动轴承零件 冲压保持架 技术条件.pdf

JB T 10338-2002 滚动轴承零件磁粉探伤规程.pdf

猜你喜欢

GOST 19050-1980 Square throw-away (indexable) carbide cutting inserts with 11 end-clearance angle Design and dimensions《可转位的带11后角的正方形多面硬质合金切削刀片 结构及尺寸》.pdf

GOST 19051-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔多面的正方形硬质合金切削刀片 结构及尺寸》.pdf

GOST 19052-1980 Square throw-away (indexable) carbide inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的带孔多面和单侧有切屑槽的正方形硬质合金切削刀片 结构及.pdf

GOST 19053-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes and secondary edges at cutting points Design and dimensions《可转位的带孔和顶端有斜边的正方形多面硬质合金切削刀片 .pdf

GOST 19056-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle Design and dimensions《可转位的80菱形的多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19057-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle and cylindrical holes Design and dimensions《可转位的带孔的80菱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19059-1980 Rhombic throw-away (indexable) carbide cutting inserts with 80 included angle with cylindrical holes and chip-breaking flutes on one face only Design and dimensions.pdf

GOST 19061-1980 Parallelogram throw-away (indexable) carbide cutting inserts with 84 included angle and chamfered cutting edges Design and dimensions《可转位的带切削刀的84平行四边形多面的硬质合金切削刀片 结构.pdf

GOST 19062-1980 Parallelogram throw-away (indexable) carbide cutting inserts with 55 included angle and chip-breaking flutes on one face only Design and dimensions《可转位的单侧有切屑槽的55平行四.pdf