NF J25-519-1958 Shipbuilding Sea water valves Screw-down stop-and-check valves with opening mechanism Pattern IV Operating mechanism parts list 《造船工业 海水专用阀门 带打开机构的螺杆向下止动和止回阀 式样IV 操.pdf

相关资源

开机可否运行例程.zip

易语言仿360开机助手关闭特效源码.zip

易语言取开机用时.zip

开机短信提示易语言源码.zip

传奇私服开机检测工具.zip

易语言开机启动模块源码.zip

易语言取开机时间源码.zip

易语言开机计时源码.zip

易语言MAC远程开机源码.zip

易语言设置XP开机画面源码.zip

猜你喜欢

ASTM A772 A772M-2000(2016) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current《采用正弦电流的材料交流磁导率标准试验方法》.pdf

ASTM A773 A773M-2001 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs.pdf

ASTM A773 A773M-2001(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs《使用DC电磁滞曲线记录仪的参数处理和环.pdf

ASTM A773 A773M-2014 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs《使用磁滞曲线记录仪测定低矫顽磁性材料的直流磁性能的标准试验方法》.pdf

ASTM A774 A774M-2006 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures《低温和中等温度条件下的一般腐蚀.pdf

ASTM A774 A774M-2009 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures《低温和中等温度条件下的一般腐蚀.pdf

ASTM A774 A774M-2013 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures《低温和中等温度条件下的一般腐蚀.pdf

ASTM A774 A774M-2014 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures《低温和中温一般腐蚀情况下用的焊.pdf

ASTM A775 A775M-2007a Standard Specification for Epoxy-Coated Steel Reinforcing Bars《环氧树脂涂覆的增强钢筋用标准规范》.pdf