NF Q03-056-1973 Paper and board tests Determination of the wet tensile strength of paper and board 《纸张和纸板试验 湿纸张和纸板抗拉强度的测定》.pdf

相关资源

JIS G5111-1991 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS G5111-1991 英文版 结构用高抗拉强度碳素钢及低合金钢铸件.pdf

JIS K6251-2004 硫化橡胶和热塑性橡胶 抗拉强度测定.pdf

JIS K6400-5-2004 挠性多孔聚合材料.物理性能的测定.第5部分 抗拉强度、断裂时的伸长率和撕裂强度.pdf

NASM 1312-8-1997 紧固件试验方法8 抗拉强度.pdf

HG T 2378-1992 石墨粘接剂粘接抗拉强度试验方法.pdf

JB T 7424-2007 涂附磨具 抗拉强度和伸长率测定方法.pdf

HB 5475-1991 热喷涂涂层抗拉强度试验方法.pdf

MT 47-1987 煤和岩石单向抗拉强度测定方法.pdf

HB 6852-1993 螺栓最小抗拉强度为1075MPa用预载垫圈.pdf

猜你喜欢

ANSI UL 1598B-2000 UL Standard for Safety Supplemental Requirements for Luminaire Reflector Kits for Installation on Previously Installed Fluorescent Luminaires (First Edition Repr.pdf

ANSI UL 1598B-2005 Supplemental Requirements for Luminaire Reflector Kits for Installation on Previously Installed Fluorescent Luminaires《预装荧光灯具用照明反射组件的补充要求》.pdf

ANSI UL 1598C-2014 UL Standard for Safety Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits (First Edition Reprint with revisions through and including July 12 2017)《发光.pdf

ANSI UL 1602-2009 UL Standard for Safety Gasoline-Engine-Powered Rigid-Cutting-Member Edgers and Edger-Trimmers (Fourth Edition Reprint with Revisions Through and Including January.pdf

ANSI UL 1610-1998 UL Standard for Safety Central-Station Burglar-Alarm Units (Third Edition Reprint with Revisions Through and Including March 20 2015).pdf

ANSI UL 1610-2016 UL Standard for Safety Central-Station Burglar-Alarm Units (Fourth Edition).pdf

ANSI UL 1618-2015 UL Standard for Safety Wall Protectors Floor Protectors and Hearth Extensions (Second Edition Reprint with Revisions Through and Including January 10 2018).pdf

ANSI UL 162-1994 UL Standard for Safety Foam Equipment and Liquid Concentrates (Seventh Edition Reprint with Revisions Through and Including June 12 2015).pdf

ANSI UL 162-2018 UL Standard for Safety Foam Equipment and Liquid Concentrates (Eighth Edition).pdf