NF T56-126-1995 Cellular rubbers and plastics Determination of dynamic cushioning performance 《泡沫橡胶和塑料制品 动态抗震性的测定》.pdf

相关资源

JIS K7219-1998 塑料制品.直接风化辐照、使用玻璃滤过日光风化辐照和使用菲涅耳镜处理的日光强度辐照方法.pdf

JIS Z7120-2003 塑料.塑料制品中茂比乌斯环的应用指南.pdf

CB T 180-1998 船用玻璃纤维增强塑料制品手糊成型工艺.pdf

JB 3820-1984 塑料制品液压机 精度.pdf

HB-Z 5017-1976 热固性塑料制品模压工艺.pdf

HJ T 231-2006 环境标志产品技术要求 再生塑料制品.pdf

SN T 2691-2010 塑料制品中二噁英类多氯联苯的测定 气相色谱-高分辨磁质谱法.pdf

SN T 2692-2010 塑料制品中二噁英的测定 气相色谱-高分辨磁质谱法.pdf

JB T 8458-1996 电气设备辅件塑料制品一般要求和试验方法.pdf

JT T 593-2004 公路沿线设施塑料制品耐候性指标及测试方法.pdf

猜你喜欢

FORD WSK-M4D709-A-2009 ABS MOLDING COMPOUND HIGH HEAT RESISTANT HIGH IMPACT AND HIGH TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《耐高温、高抗冲和抗拉强度的丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准.pdf

FORD WSK-M4D710-A-2009 ABS MOLDING COMPOUND VERY HIGH HEAT RESISTANT AND HIGH TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A 《极高耐高温性能和高抗拉强度的丙烯腈-丁二烯-苯乙烯共聚物(ABS)成型料 与标准FORD .pdf

FORD WSK-M4D712-A1-2006 THERMOPLASTIC ELASTOMER (TPE) POLYOLEFIN EPDM RUBBER MODIFIED 50 DUROMETER D HARDNESS TO BE USED WITH FORD WSS-M99P1111-a (Use WSS-M2D382-B1)《汽车外部用硬度为50 D.pdf

FORD WSK-M4D712-A2-2006 THERMOPLASTIC ELASTOMER (TPE) POLYOLEFIN EPDM RUBBER MODIFIED 50 DUROMETER D HARDNESS EXTERIOR (Use with WSS-M2D382-B1)《汽车外部用硬度为50 D的耐候型三元乙丙橡胶(EPDM)橡胶改性聚烯径热.pdf

FORD WSK-M4D713-A-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 6% MINERAL FILLED HIGH IMPACT PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《6%矿物填充 耐冲击可涂装的热塑性聚烯烃弹性体(TEO) 与福特WSS-.pdf

FORD WSK-M4D714-A-2011 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27 % MINERAL FILLED COLOR PIGMENTED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《27%矿物填充 内部着色的热塑性聚烯烃弹性体(TEO) 与福特.pdf

FORD WSK-M4D714-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27% MINERAL FILLED MOLDING COMPOUND PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D715-A-2010 POLYAMIDE (PA) 46 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、30%玻璃纤维增强的聚酰胺46成型料 与标准FORD WSS-M99.pdf

FORD WSK-M4D715-A2-2010 POLYAMIDE (PA) 46 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《受热稳定、30%玻璃纤维增强的聚酰胺46成型料 与标准FORD WSS-M9.pdf