ONORM ENV 1992-1-1-1992 Eurocode 2 Design of concrete structures -Part 1-1 General rules and rules for buildings《Eurocode 2 钢筋混凝土和预应力混凝土主体设计 第1－1部分：建筑物的基础和应用准则》.pdf

相关资源

CP 82-1999 CODE OF PRACTICE FOR Waterproofing of reinforced concrete buildings《钢筋混凝土建筑物的防水规范》.pdf

GOST 19010-1982 Concrete and reinforced concrete blocks for walls of buildings General specifications《建筑物混凝土和钢筋混凝土墙砌块 一般技术条件》.pdf

ISO 15673-2016 Guidelines for the simplified design of structural reinforced concrete for buildings《建筑物结构钢筋混凝土简化设计指南》.pdf

TCVN 2276-1991 The reinforced concrete hollow slab for floors and roofs of buildings《建筑物地板和屋顶用钢筋混凝土空心板》.pdf

TCVN 5718-1993 Reinforced concrete roof and floor of buildings Technical requirements for watertightness《建筑物钢筋混凝土屋顶和地板 防水性技术要求》.pdf

GOST 26919-1986 Reinforced concrete window boards for residential civil and auxiliary buildings Specification《住宅、公用物和辅助建筑物用钢筋混凝土窗户板 技术条件》.pdf

GOST 21506-2013 Reinforced concrete ribbed floor slabs of 300 mm depth for buildings and structures Specifications《建筑物和构筑物用深度为300 mm的钢筋混凝土密肋楼板 规格》.pdf

GOST 32499-2013 Reinforced concrete multihollow slabs for floors in buildings for span to 9 m stand moulding Specifications《模制跨度为9 m的建筑物地板的钢筋混凝土多空心板 规格》.pdf

JUS U F2 020-1988 Finishing works in building Floating floors constructions Fiat reinforced concrete slab floor Wet placing《建筑物装饰工程 浮动地板的施工 钢筋混凝土楼板》.pdf

GOST 23444-1979 Centrifugated reinforced concrete posts of annular section for industrial buildings and structures Specifications《生产厂房和工程建筑物用的离心法制作的钢筋混凝土环形截面立柱 技术条件》.pdf

猜你喜欢

AGMA 97FTM9-1997 Relations Between Wear and Pitting Phenomena in Worm Gears《蜗轮中的磨损和点蚀现象之间的关系》.pdf

AGMA 97FTMS1-1997 Coordinate Measurement and Reverse Engineering of ZK Type Worm Gearing《ZK型蜗轮传动装置的坐标量测和逆向工程设计》.pdf

AGMA 98FTM1-1998 Method for Predicting the Dynamic Root Stresses of Helical Gear Teeth《预测螺旋齿的动态齿根应力的方法》.pdf

AGMA 98FTM10-1998 Local Coefficients of Friction in Worm Gear Contacts《蜗轮接触的局部摩擦系数》.pdf

AGMA 98FTM11-1998 Improving Pump Gear Geometry Through Secondary Gear Tooth Finishing《通过二档齿轮齿精整提高泵齿轮的几何精度》.pdf

AGMA 98FTM12-1998 Gear Refurbishment an Economical Approach for Aerospace Overhaul & Repair《齿轮翻新.航空大修和维修的一种经济方法》.pdf

AGMA 98FTM2-1998 Mesh Friction in Gearing《齿轮的啮合摩擦》.pdf

AGMA 98FTM3-1998 Basic Studies on Fatigue Strength of Case-Hardened Gear Steel - Effects of Shot Peening and or Barrelling Processes《渗碳硬化齿轮钢疲劳强度的基本研究.喷丸硬化和 或滚光加工的作用》.pdf

AGMA 98FTM4-1998 Effect of Uncontrolled Heat Treat Distortion on the Pitting Life of Ground Carburized and Hardened Gears《不受控制的热处理变形对于磨光 渗碳和硬化齿轮的点蚀寿命的影响》.pdf