ONORM M 5861-1-1993 Manual determination of particle concentrations in fluid gases - Gravimetrie method - General requirements《流体粒子浓度的测定手册 重量法 一般要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D663-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 33% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D673-A)《33%玻璃纤维增强、受热稳定的聚酰胺66 与标准FORD WSS-M99P1.pdf

FORD WSK-M4D664-A-2006 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D993-A)《受热稳定、30%玻璃纤维增强的聚酰胺6成型料 与标准FORD WSS-M99P.pdf

FORD WSK-M4D664-A2-2011 POLYAMIDE (PA) 6 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部有30%玻璃纤维增强模塑材料热稳定聚酰胺(PA)6 与福.pdf

FORD WSK-M4D665-A-2006 POLYAMIDE (PA) 6 15% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D665-A2)《15%玻璃纤维增强的聚酰胺6 与标准FORD WSS-M99P1111-A一起使用 使用WSK-M4D66.pdf

FORD WSK-M4D665-A2-2005 POLYAMIDE (PA) 6 15% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用15%玻璃纤维增强的聚酰胺6成型料 与标准FORD WSS-M99P1111-A一.pdf

FORD WSK-M4D666-A-2014 POLYAMIDE 66 (PA66) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D667-A-2014 POLYAMIDE (PA) 6 HEAT STABILIZED 40 % MINERAL FILLED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D667-A-2015 POLYAMIDE (PA) 6 HEAT STABILIZED 40 % MINERAL FILLED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D668-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 43% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D596-A)《43%玻璃纤维增强、受热稳定的聚酰胺66 与标准FORD WSS-M99P1.pdf