ONORM M 6781-1-1996 Master gears for checking of cylindrical gears - Gear blank and gearing《圆柱齿轮检查用主齿轮 齿轮毛坯和齿轮装置》.pdf

相关资源

JB T 9050.2-1999 圆柱齿轮减速器 接触斑点测定方法.pdf

JB T 9050.3-1999 圆柱齿轮减速器 加载试验方法.pdf

CB- 3299-1987 船舶渐开线圆柱齿轮承载能力计算方法.pdf

HG T 3139.12-2001 釜用立式减速机 KJ系列可移式圆柱齿轮减速机.pdf

HG T 3139.3-2001 釜用立式减速机 LC系列圆柱齿轮减速机.pdf

JB T 3989.5-2014 渐开线圆柱齿轮磨齿机 第5部分：大平面砂轮磨齿机 精度检验.pdf

FZ T 90032-1992 纺织机械渐开线圆柱齿轮精度.pdf

FZ T 90047-1993 圆柱齿轮结构型式及尺寸.pdf

FZ T 90077-1995 纺织机械渐开线圆柱齿轮承载能力简化计算方法.pdf

FZ T 91018-1996 纺织机械渐开线圆柱齿轮加工工艺规范.pdf

猜你喜欢

EN ISO 11543-2002 en Modified Starch - Determination of Hydroxypropyl Content - Method Using Proton Nuclear Magnetic Resonance (NMR) Spectrometry《改良淀粉 羟丙基含量的测定 质子核磁共振光谱测定法(NMR)ISO .pdf

EN ISO 11545-2009 en Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of wate.pdf

EN ISO 11546-1-2009 en Acoustics - Determination of sound insulation performances of enclosures - Part 1 Measurements under laboratory conditions (for declaration purposes)《声学 密封罩隔.pdf

EN ISO 11546-2-2009 en Acoustics - Determination of sound insulation performances of enclosures - Part 2 Measurements in situ (for acceptance and verification purposes)《声学 隔声罩隔声性能的.pdf

EN ISO 11547-1995 en Small Craft - Start-in-Gear Protection (Incorporates Amendment A1 2000)《小型船舶 起动啮合保护装置 包含修改件A1-2000 ISO 11547-1994》.pdf

EN ISO 11551-2003 en Optics and Optical Instruments - Lasers and Laser-Related Equipment - Test Method for Absorptance of Optical Laser Components《光学和光学仪器 激光和激光设备 光学激光组件光吸收性试验方法 IS.pdf

EN ISO 11553-1-2008 en Safety of machinery - Laser processing machines - Part 1 General safety requirements《机械的安全性 激光加工机械 第1部分 一般安全要求》.pdf

EN ISO 11553-2-2008 en Safety of machinery - Laser processing machines - Part 2 Safety requirements for hand-held laser processing devices《机械的安全性 激光加工机械 第2部分 手持激光加工装置的安全性要求》.pdf

EN ISO 11553-3-2013 en Safety of machinery - Laser processing machines - Part 3 Noise reduction and noise measurement methods for laser processing machines and hand-held processing.pdf