ONORM M 6794-2-1997 Pinion-type cutters for cylindrical gears - Tolerances and permissible deviations《圆柱齿轮的小齿轮型切割机 公差和容许偏差》.pdf

相关资源

JB T 9050.2-1999 圆柱齿轮减速器 接触斑点测定方法.pdf

JB T 9050.3-1999 圆柱齿轮减速器 加载试验方法.pdf

CB- 3299-1987 船舶渐开线圆柱齿轮承载能力计算方法.pdf

HG T 3139.12-2001 釜用立式减速机 KJ系列可移式圆柱齿轮减速机.pdf

HG T 3139.3-2001 釜用立式减速机 LC系列圆柱齿轮减速机.pdf

JB T 3989.5-2014 渐开线圆柱齿轮磨齿机 第5部分：大平面砂轮磨齿机 精度检验.pdf

FZ T 90032-1992 纺织机械渐开线圆柱齿轮精度.pdf

FZ T 90047-1993 圆柱齿轮结构型式及尺寸.pdf

FZ T 90077-1995 纺织机械渐开线圆柱齿轮承载能力简化计算方法.pdf

FZ T 91018-1996 纺织机械渐开线圆柱齿轮加工工艺规范.pdf

猜你喜欢

ASTM F1960-2015 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing《交联聚乙烯 (PEX) 管件用带PEX加固环的冷膨胀配件的标准规格》.pdf

ASTM F1961-2002a Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing《交联聚乙烯(PEX)管用带盘簧的金属机械冷扩口加压管件的.pdf

ASTM F1962-2005 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles Including River Crossings《包括渡口在内的障碍物下聚乙.pdf

ASTM F1962-2005e1 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles Including River Crossings《包括渡口在内的障碍物下.pdf

ASTM F1962-2011 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles Including River Crossings《安装聚乙烯管或在障碍物 包.pdf

ASTM F1963-2005 Standard Specification for Deep-Fat Fryers Gas or Electric Open《燃气或电敞口式深油煎锅标准规范》.pdf

ASTM F1963-2005(2011) Standard Specification for Deep-Fat Fryers Gas or Electric Open《燃气或电敞口式深油煎锅的标准规格》.pdf

ASTM F1963-2005(2017)e1 Standard Specification for Deep-Fat Fryers Gas or Electric Open《敞口式燃气或电力式深油煎锅的标准规格》.pdf

ASTM F1964-1999(2005) Standard Test Method for Performance of Pressure and Kettle Fryers《压力油炸器和锅状油炸器性能的标准试验方法》.pdf