ONORM S 1100-2001 Requirements for the training of qualified laser safety officers for certain types of laser application《某些类型激光器应用中的合格激光器安全人员的训练要求》.pdf

相关资源

SJ 1873-1981 气体激光器最佳工作电流的测试方法.pdf

SJ 1871-1981气体激光器的测试条件.pdf

SJ 1871-1981 气体激光器的测试条件.pdf

JB T 7795-1995 激光器和与激光有关的设备.机械接口.pdf

JB T 7795-1995 激光器和与激光有关的设备——机械接口.pdf

BS EN ISO 17526-2003 Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers《光学和光学仪器 激光器和激光相关设备 激光器的使用寿命》.pdf

GOST 26086-1984 Lasers Methods for measurement of beam diameter and beam energy divergence angle《激光器 激光器辐射波束直径和能量散度的测量方法》.pdf

SJ 1878-1981 气体激光器横模的鉴别方法.pdf

EN ISO 17526-2003 en Optics and optical instruments Lasers and laser-related equipment Lifetime of lasers《光学和光学仪器 激光器和激光相关设备 激光器的使用寿命 ISO 17526-2003》.pdf

猜你喜欢

NF A45-101-1984 Iron and steel Bar and rod of special steels or for special purpose Rolling tolerances 《钢铁 特殊用途的特殊钢棒材和线材 轧制公差》.pdf

NF A45-102-1983 Iron and steel Special steel flats or flats intended for special use Rolling tolerances 《钢铁 特殊钢造的或具有特殊用途的扁钢 轧制公差》.pdf

NF A45-103-1987 Iron and steel Rolled tools steel bars and flat Dimensional tolerances 《铁钢 轧制工具钢钢棒和扁钢 尺寸和公差》.pdf

NF A45-104-1987 Iron and steel Forged tool steel bars and flats Dimensional tolerances 《钢铁 锻造工具钢棒钢和扁钢 尺寸公差》.pdf

NF A45-110-1983 Iron and steel Stainless and heat resisting steel for bars and wires Rolling tolerances 《钢铁 棒材和线材用不锈钢和耐热钢 轧制公差》.pdf

NF A45-201-1983 Iron and steel Broad parallel-faced flanged beams Dimensions 《钢铁 两缘平行的宽缘工字梁 尺寸》.pdf

NF A45-202-1986 Iron and steel products Inclined face flange sections (UPN) Dimensions 《钢铁产品 斜面凸缘型钢(UPN) 尺寸》.pdf

NF A45-205-1983 Iron and steel IPE section Parallel flanged beams 《钢铁 IPE型材 两边平行的工字钢》.pdf

NF A45-209-1983 Iron and steel IPN sections Dimensions 《钢铁 IPN型材 尺寸》.pdf