ONORM V 5751-1990 Cargo securement auxiliary means《货物固定装置 辅助工具》.pdf

相关资源

HB 2755-1976 立轴式 六角车床辅助工具技术条件.pdf

HB 2825-1976 镗床辅助工具技术条件.pdf

HB 2619-1976 拉床辅助工具技术条件.pdf

HB 2851-1976 钻床辅助工具技术条件.pdf

HB 2782-1976 车床辅助工具技术条件.pdf

HB 2-58-1983 拉床辅助工具技术条件.pdf

HB 2644-1976 铣床辅助工具技术条件.pdf

HB 2691-1976 单轴六角自动车床辅助工具技术条件.pdf

HB 2720-1976 卧轴式六角车床辅助工具及附件技术条件.pdf

QJ 996.11-1986 车床辅助工具圆刀杆夹.pdf

猜你喜欢

FORD WSK-M4D642-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 30% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D673-A)《30%玻璃纤维增强、受热稳定的聚酰胺66 与标准FORD WSS-M99P1.pdf

FORD WSK-M4D642-A2-2009 POLYAMIDE (PA) 66 HEAT STABILIZED 30% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用受热稳定、30%玻璃纤维增强的聚酰胺66成型料 .pdf

FORD WSK-M4D642-A3-2006 POLYAMIDE (PA) 66 HEAT STABILIZED 30% GLASS FIBER REINFORCED REDUCED MOISTURE ABSORPTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D.pdf

FORD WSK-M4D643-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL FILLED MELT FLOW RATE 4 - 7 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为4-7的40%矿物填充的聚丙烯(PP)均聚物 与标准FORD WSS-M99.pdf

FORD WSK-M4D643-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL FILLED MELT FLOW RATE 1 - 3 5 TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D643-A1)《40%矿物填充熔态流动率为1-.pdf

FORD WSK-M4D644-A-2004 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL FILLED CONTROLLED RHEOLOGY (CR) GRADE TO BE USED WITH FORD WSS-M99P1111-A 《流变性能(CR)控制级40%矿物填充的聚丙烯(PP)均聚物 与标准FOR.pdf

FORD WSK-M4D644-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL MIX FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚丙烯均聚物 40%矿物混合填充模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D644-A4-2011 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL MIX FILLED HIGH HEAT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%矿物混合填充高热量聚丙烯(PP)均聚物模塑材料 与福特WSS-M.pdf

FORD WSK-M4D645-A-2009 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯（PE）高密度成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf