1、AEROS PACE INFORM ATION REPORTAIR1408RE V.AIssued 1976-03Revised 1986-09Reaffirmed 2007-12Superseding AIR1408Aerospace Fuel System Specifications and Standards1. SCOPE:This report lists documents that aid and govern the design of gas turbine powered aircraft and missile fuel systems. The report list
2、s the military and industry specifications and standards and the most notable design handbooks that are commonly used in fuel system design.The specifications and standards section has been divided into two parts, a master list arranged numerically of all industry and military specifications and sta
3、ndards and a component list that provides a functional breakdown and a cross-reference of these documents. It is intended that this report be a supplement to specifications MIL-F-8615, MIL-F-17874, MIL-F-38363 and MIL-F-87154. Revisions and amendments which are correct for the specifications and sta
4、ndards are not listed.The fuel system design handbooks are listed for fuels and for system and component design.1.1 Availability of Documents:The following information pertains to the availability of specifications and standards.1.1.1 Military Documents:Department of Defense Index of Specifications
5、and Standards; prepared by the Naval Publications and Forms Center (MPEC 103), Philadelphia, PA 19120. This document is published annually with bi-monthly cumulative supplements.1.1.2 Society of Automotive Engineers, Inc.:SAE Aerospace Standards, Recommended Practices, Information Reports (AS, ARP,
6、AIR) Index. This document is published by SAE, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.1.1.3 American Society for Testing and Materials Documents:Available from ASTM, 1916 Race Street, Philadelphia, PA 19103.1.1.4 Federal Aviation Administration Technical Standard Orders:Available from FA
7、A; Aircraft Engineering Division (AWS-100); 800 Independence Avenue, SW, Washington, DC 20591.1.1.5 Industry Documents:Available from appropriate company.SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The
8、 use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revis
9、ed, or cancelled. SAE invites your written comments and suggestions. Copyright 2007 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or othe
10、rwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE AIR1408 Revision A- 2 -2. MASTER LIST OF DOCUMENTS:2.1 Air F
11、orce-Navy Aeronautical Standards:ANA 107 Inspection Standards for Stand and Dissection Tested Self-Sealing Fuel and Oil Cells (Use MIL-STD-801)ANA 112 Acceptance Standards for Self-Sealing Fuel and Oil Cells(Use MIL-STD-801)AN2555 Nozzle - Aircraft Fueling2.2 Federal Aviation Administration Technica
12、l Standard Orders (TSO):AC 20-53 Protection of Aircraft Fuel Systems Against LightningTSO-C44 Fuel FlowmetersTSO-C47 Pressure Instruments - Fuel, Oil, and HydraulicTSO-C53 Fuel and Engine Oil System Hose AssembliesTSO-C76 Fuel Drain ValvesTSO-C77 Gas Turbine Auxiliary Power UnitsTSO-C80 Flexible Fue
13、l and Oil Cell Material2.3 Federal Specifications and Standards:BB-N-411 Nitrogen, TechnicalP-D-680 Dry Cleaning SolventQQ-C-320 Chromium PlatingQQ-P-416 Plating, Cadmium (Electro deposited)TT-S-735 Standard Test Fluids, HydrocarbonVV-F-800 Fuel Oil, DieselVV-F-815 Fuel Oil, BurnerVV-G-109 Gasoline,
14、 UnleadedVV-G-1690 Gasoline, Automotive, Leaded or UnleadedSAE AIR1408 Revision A- 3 -2.3 (Continued):WW-T-700E/Gen Tube, Aluminum and Aluminum Alloy Drawn, Seamless, General Spec forFED-STD-595 Colors, Requirements for Individual Chips Submitted2.4 Industry Specifications:ANSI/ASTM D 471 Rubber Pro
15、perties, Effect of LiquidsASTM D 1655 Aviation Turbine Fuels, Type A, A-1 and B; American Society of Testing and MaterialsDDA/GM EMS64 Fuel, Turbine Engine Commercial Aircraft; Detroit Diesel Allison/General Motors CorporationEMS 53111 Jet A Type Fuel Specification, Garrett Turbine EnginesEMS 53112
16、Jet A-1 General Electric CompanyPWA 522 (also Fuel, Commercial Aircraft Turbine Engine; Pratt and Whitney AircraftService Bulletin Group/United TechnologiesNo. 2016)2.5 Military Specifications:MIL-D-1000 Drawings, Engineering Exterior, Aircraft, General Requirements forMIL-S-6758 Steel, Chrome-Molyb
17、denum (4130) Bars and Reforging Stock (Aircraft Quality)MIL-R-6800 Resin Coating, Permanent, for Aircraft Engine Parts, Application ofMIL-R-6855 Rubber, Synthetic, Sheets, Strips, Molded or Extruded ShapesMIL-P-6992 Pump Assembly, Fuel, Electrically Driven, Aircraft HeaterMIL-C-7024 Calibrating Flui
18、d, Aircraft Fuel System ComponentsMIL-H-7061 Hose, Rubber, Aircraft, Self-Sealing, Aromatic FuelMIL-E-7080 Electric Equipment, Aircraft, Selection and Installation ofMIL-F-7179 Finishes, Coatings, and Sealants for the Protection of Aerospace Weapon SystemMIL-F-7190 Forging, Steel, for Aircraft and S
19、pecial Ordinance Applications“C“ MIL-C-7244 Cap and Adapter Unit, Tank Filler (Use MIL-C-38373)MIL-T-7378 Tank, Fuel, Aircraft, External, Auxiliary, RemovableSAE AIR1408 Revision A- 6 -2.5 (Continued):MIL-C-7413 Coupling, Quick Disconnect, Automatic Shutoff, General Specification forMIL-I-7566 Indic
20、ator System, Fuel Flowmeter, General Specification for“C“ - Document is now cancelled.MIL-S-7742 Screw Threads, Standard, Optimum Selected Series, General Specifications forMIL-V-7899 Valves, Check, Aircraft Fuel SystemMIL-G-7940 Gages, Liquid Quantity, Capacitor Type, Installation and Calibration o
21、fMIL-M-7969 Motors, Alternating Current, 400 Cycle, 115/200-Volt System, Aircraft, General Specification forMIL-P-8045 Plastic, Self-Sealing and Non-Self-Sealing Tank Backing MaterialMIL-I-8500 Interchangeability and Replaceability of Component Parts for Aerospace VehiclesMIL-S-8516 Sealing Compound
22、, Polysulfide Rubber, Electric Connectors and Electric Systems, Chemically CuredMIL-E-8593 Engine, Aircraft, Turboshaft and Turboprop, General Specification forMIL-C-8603 Clamp, Loop Type, and Straps, SupportMIL-C-8605 Cap; Pressure Fuel ServicingMIL-T-8606 Tubing, Steel, Corrosion-Resistant (18-8 S
23、tabilized and Extra Low Carbon)MIL-V-8608 Valves, Fuel Shutoff, Electric Motor OperatedMIL-M-8609 Motors, DC, 28 Volt System, Aircraft, General Specification forMIL-V-8610 Valves, Fuel Shutoff Solenoid Operated, 28 Volts D.C.MIL-F-8615 Fuel Systems Components, General Specification forMIL-A-8625 Ano
24、dic Coating, for Aluminum and Aluminum AlloysSAE AIR1408 Revision A- 7 -2.5 (Continued):MIL-P-8686 Power Units, Aircraft Auxiliary, Gas Turbine-Type, General Specifications forMIL-D-8706 Data and Tests, Engineering, Contract Requirements for Aircraft Weapon SystemsMIL-D-8708 Demonstration Requiremen
25、ts for AirplanesMIL-S-8710 Strainer, Aircraft Fuel System, General Specification forMIL-H-8794 Hose, Rubber, Hydraulic, Fuel and Oil ResistantMIL-H-8795 Hose Assembly, Rubber, Hydraulic, Fuel and Oil ResistantMIL-S-8802 Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavit
26、ies, High-AdhesionMIL-A-8865 Airplane Strength and Rigidity Miscellaneous LoadsMIL-S-8879 Screw Threads, Controlled Radius Root with Increased Minor Diameter, General Specification forMIL-C-8956 Clamp, Loop, Tube SupportMIL-S-9395 Switches, Pressure (Absolute, Gage, and Differential), General Specif
27、ication forMIL-Q-9858 Quality Program RequirementsMIL-T-14442 Tank Fuel, Engines, Non-Metallic, Non-Self-Sealing, for Military VehiclesMIL-F-17874 Fuel Systems, Aircraft, Installation and Test ofMIL-F-18802 Fuel and Oil Lines, Aircraft, Installation ofMIL-T-18847 Tank, Fuel, Aircraft, Auxiliary Exte
28、rnal, Design and Installation ofMIL-A-19736 Air Refueling Systems, General Specification ofMIL-A-21180 Aluminum-alloy Castings, High StrengthMIL-C-22263 Coupling, Fuel Line, Flexible, 125 psi, General Specification forSAE AIR1408 Revision A- 8 -2.5 (Continued):MIL-A-22847 Air Refueling Store System:
29、 D-704MIL-I-25017 Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (Metric)MIL-V-25023 Valve, Fuel Drain, Self-LockingMIL-M-25047 Markings and Exterior Finish Colors for Airplanes, Airplane Parts, and Missiles (Ballistic Missiles Excluded)MIL-N-25161 Nozzle, Aerial Pressure Refueling, Type MA-2
30、MIL-C-25162 Coupling, Reception, Flight Pressure Refueling, Type MA-2MIL-E-25499 Electrical System, Aircraft, Design and Installation of, General Specification forMIL-F-25524 Turbine Fuel, Aviation, Thermally StableMIL-H-25579 Hose Assembly, Tetrafluoroethylene, High Temperature, Medium Pressure, Ge
31、neral Requirements forMIL-J-25656 Jet Fuel, Grade JP-6MIL-T-25783 Tank, Fuel A/C and Missile, Non-Self-Sealing High Temperature, RemovableMIL-A-25896 Adapter, Pressure Fuel Servicing, Nominal 2-1/2 inch Diameter“C“ MIL-R-25897 Rubber, Fluorocarbon Elastomer, High Temperature, Fluid Resistant (Use MI
32、L-R-83248)MIL-T-25905 Transmitter, Rate of Flow TRU-7/A, Fuel, 0-15,000 PPHMIL-I-25906 Indicator, Rate of Flow EFU-3/A, Fuel, 0-15,000 PPHMIL-S-25980 Switch, Float, Aircraft Fuel Level, General Specification forMIL-R-25988 Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Mol
33、ded Parts and Extruded ShapesMIL-F-26364 Fitting, Tank, High Temperature, Non-Self-Seal Aircraft and Missile“C“ MIL-S-26390 Switch Assemblies, Pressure, Aircraft Fuel (None Given)SAE AIR1408 Revision A- 9 -2.5 (Continued):“C“ MIL-N-26978 Nozzle, Fuel & Oil Servicing, Over Wing, Shockproof, Type MD-1
34、,MD-2 (Use MIL-N-87963)MIL-G-26988 Gage, Liquid Quantity, Capacitor Type, Transistorized, General Specification forMIL-F-27351 Fluid, Calibrating, High Flash Point, Aircraft Fuel System ComponentsMIL-T-27422 Tank, Fuel, Crash-Resistant, AircraftMIL-R-27521 Receptacle, Flying Boom, Aerial Refueling,
35、General Specification forMIL-C-27536 Coupling, Clamp, Grooved, V-Band“C“ - Document is now cancelled.MIL-I-27686 Inhibitor, Icing, Fuel SystemMIL-T-38144 Transmitter, Rate of Flow, FuelMIL-T-38219 Turbine Fuel, Low Volatility, JP-7MIL-A-38301 Application Requirements for MIL-C-38300 Connector, Elect
36、rical (Inactive)MIL-F-38363 Fuel System, Aircraft, General Specification forMIL-C-38373 Cap, Fluid Tank FillerMIL-S-38449 Signal and Signal/Intercommunication Amplifiers, Universal, Aerial RefuelingMIL-A-38726 Adaptor Assembly, Reusable, Flexible Hose, Low PressureMIL-C-38999 Connector, Electrical,
37、etc.MIL-I-45208 Inspection System RequirementsMIL-C-45662 Calibration System Requirements (Now MIL-STD-45662)MIL-T-46786 Tanks, Fuel, Engine: General Requirements forMIL-R-52255 Repair Kits, Emergency, Collapsible Tanks, and Drums, PetroleumSAE AIR1408 Revision A- 10 -2.5 (Continued):MIL-N-52747 Noz
38、zle Assembly, Closed Circuit RefuelingMIL-N-52748 Nozzle, Adaptor, Closed Circuit to Gravity FillMIL-T-52983 Tank, Fabric, Collapsible, 3,000, 10,000, 20,000, and 50,000 Gallon, PetroleumMIL-D-81298 Dye, Liquid, for Detection of Leaks in Aircraft Fuel SystemsMIL-V-81356 Valve, Fuel System, Pressuriz
39、ation and VentMIL-C-81511 Connector, Electrical, etc.MIL-C-81975 Coupling, Regulated, Aerial Pressure Refueling Type MA-3MIL-P-82522 Propellant, Jet Engine, T-h Dimer. Grade RJ-4MIL-C-83019 Coating, Polyurethane, for Protection of Integral Fuel Tank Sealing CompoundMIL-B-83054 Baffle and Inerting Ma
40、terial, Aircraft Fuel TankMIL-T-83133 Turbine Fuel, Aviation, Kerosene Type, Grade JP-8MIL-T-83219 Truck, Tank A/S32R-9MIL-T-83240 Transmitter, Rate of Flow, Fuel TRU-113AMIL-R-83248 Rubber, Fluorocarbon Elastomer, High Temp Fluid and Compression Set ResistantMIL-C-83291 Covers, Self-Sealing, Fuel L
41、ine, AircraftMIL-I-83294 Installation Requirements, Aircraft Propulsion Systems, General Specification forMIL-T-83323 Tester, Universal Receptacle, Aerial RefuelingMIL-C-83413/10 Connectors and Assemblies, Electrical, Aircraft Grounding: Jumper Cable Assembly, Aircraft to Fuel Nozzle, Discharger, El
42、ectrostaticMIL-C-85052 Clamp, Loop, Cushion, General Specification forMIL-C-85061 Coupling, Fuel Line, Flexible, 125 psiSAE AIR1408 Revision A- 11 -2.5 (Continued):MIL-C-85449 Clamp Assembly, Saddle-Type, Cushion, General Specification forMIL-P-87107 Propellant, High Density Synthetic Hydrocarbon Ty
43、pe, Grade JP-9 and JP-10MIL-F-87154 Fuel Systems, General Design SpecificationMIL-B-87162 Baffle Material, Explosion Suppression, Expanded Aluminum Mesh, for Aircraft Fuel TanksMIL-P-87175 Packing, Preformed, Petroleum, Hydraulic Fluid Resistant, Phosphonitrilic FluoroelastomerMIL-N-87963 Nozzle: Fu
44、el, Aircraft, Overwing: Type MD-32.6 Military Standards:MIL-STD-100 Engineering Drawing, Practices (Now DOD-STD-100)MIL-STD-129 Marking for Shipment and StorageMIL-STD-130 Identification Marking of U.S. Military PropertyMIL-STD-143 Standards and Specifications, Order of Precedence for the Selection
45、ofMIL-STD-190 Identification Marking of Rubber ProductsMIL-STD-202 Test Methods for Electronic and Electrical Component PartsMIL-STD-210 Climatic Extremes for Military EquipmentMIL-STD-295 Bill of Material, Preparation ofMIL-STD-461 Electromagnetic Emission and Susceptibility Requirements for the Co
46、ntrol of Electromagnetic InterferenceMIL-STD-462 Electromagnetic Interference Characteristics Measurement ofMIL-STD-470 Maintainability Program Requirements for Systems and EquipmentsMIL-STD-471 Maintainability Verification/Demonstration/EvaluationMIL-STD-490 Specification PracticesSAE AIR1408 Revis
47、ion A- 12 -2.6 (Continued):MIL-STD-701 Lists of Standard Semiconductor DevicesMIL-STD-704 Aircraft Electric Power CharacteristicsMIL-STD-781 Reliability Design Qualification and Production Acceptance Tests, Exponential DistributionMIL-STD-785 Reliability Program for Systems and Equipment Development
48、 and ProductionMIL-STD-794 Parts and Equipment, Procedures for Packaging ofMIL-STD-801 Inspection and Acceptance Standards for Propulsion Fluid Cells and FittingsMIL-STD-810 Environmental Test Methods and Engineering GuidelinesMIL-STD-831 Test Reports, Preparation ofMIL-STD-882 System Safety Program
49、 RequirementsMIL-STD-889 Dissimilar MetalsMIL-STD-1247 Markings, Functions and Hazard Designations of Hose Pipe, and Tube Lines for Aircraft, Missile and Space SystemsMIL-STD-1290 Light Fixed- and Rotary-Wing Aircraft CrashworthinessMIL-STD-1518 Storage, Handling, Servicing of Aviation Fuels, Lubricating Oils, and Hydraulic Fluids at Contractor FacilitiesMIL-STD-1523 Age Controls of Age-Sensitive Elastomeric Materials (for Aerospace Applications)MIL-STD-1529 Vendor Substantiation for Aerospace Propulsion System ItemsMIL-STD-1568 Materials and Processes for Cor
