1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this publication m
3、ay be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside U
4、SA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AMS2437C AEROSPACE MATERIAL SPECIFICATION AMS2437 REV. C Issued 1971-11 Revised 2003-11 Reaff
5、irmed 2012-08 Superseding AMS2437B Coating, Plasma Spray Deposition RATIONALE AMS2437C has been reaffirmed to comply with the SAE five-year review policy. SAE AMS2437C Page 2 of 11 SAE AMS2437C Page 3 of 11 SAE AMS2437C Page 4 of 11 SAE AMS2437C Page 5 of 11 SAE AMS2437C Page 6 of 11 SAE AMS2437C Page 7 of 11 SAE AMS2437C Page 8 of 11 SAE AMS2437C Page 9 of 11 SAE AMS2437C Page 10 of 11 SAE AMS2437C Page 11 of 11
