1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2017 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970
4、 (outside USA)Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/AMS4203C AEROSPACEMATERIAL SPECIFICATIONAMS4203 REV. C Issued 1982-07 Revised 2005-04 Reaffirmed
5、2017-09 Superseding AMS4203B Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7351) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated (Composition similar to UNS A97010) RATIONALE AMS4203C has been reaffirmed to comply with the SAE Five-Year Review policy. SAE INTERNATIONAL AMS4203C Page 2 of 8_ SAE INTERNATIONAL AMS4203C Page 3 of 8_ SAE INTERNATIONAL AMS4203C Page 4 of 8_ SAE INTERNATIONAL AMS4203C Page 5 of 8_ SAE INTERNATIONAL AMS4203C Page 6 of 8_ SAE INTERNATIONAL AMS4203C Page 7 of 8_ SAE INTERNATIONAL AMS4203C Page 8 of 8_
