1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/ARP1234B AEROSPACE RECOMMENDED PRACTICE ARP1234 REV. B Issued 1979-06 Revised 200
5、1-11 Reaffirmed 2012-11 Superseding ARP1234A Gland Design, Elastomeric O-Ring Seals, Static Axial, Without Back-Up Rings RATIONALE ARP1234B has been reaffirmed to comply with the SAE five-year review policy. SAE ARP1234B Page 2 of 15 SAE ARP1234B Page 3 of 15 SAE ARP1234B Page 4 of 15 SAE ARP1234B Page 5 of 15 SAE ARP1234B Page 6 of 15 SAE ARP1234B Page 7 of 15 SAE ARP1234B Page 8 of 15 SAE ARP1234B Page 9 of 15 SAE ARP1234B Page 10 of 15 SAE ARP1234B Page 11 of 15 SAE ARP1234B Page 12 of 15 SAE ARP1234B Page 13 of 15 SAE ARP1234B Page 14 of 15 SAE ARP1234B Page 15 of 15
