1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21551-4 SANS 14518:2008Edition 1ISO 14518:2005Edition 1SOUTH AFRICAN NATIONAL STANDARD Cranes Requirements for test loads This national st
4、andard is the identical implementation of ISO 14518:2005 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code +2
5、7 12 www.stansa.co.za Standards South Africa SANS 14518:2008 Edition 1 ISO 14518:2005 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA TC 5120.59, Cranes, in accordance with procedures of Standards South Africa,
6、in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in May 2008. INTERNATIONALSTANDARDISO14518First edition2005-02-01Reference numberISO 14518:2005(E) ISO 2005Cranes Requirements for test loadsAppareils de levage charge suspendue Exigences pour les charges dessaiSAN
7、S 14518:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14518:2005(E)ii ISO 2005 All rights reservedPDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or vi
8、ewed but shallnot be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. Indownloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariataccepts no liability in t
9、his area.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creationparameters were optimized for printing. Every care has been taken to ensure that the file is suitable for u
10、se by ISO member bodies. In theunlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. ISO 2005All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,elect
11、ronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below orISOs member body in the country of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb
12、www.iso.orgPublished in SwitzerlandSANS 14518:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14518:2005(E) ISO 2005 All rights reserved iiiForewordISO (the International Organization for Standardization) is a worldwide federation of
13、national standards bodies(ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for which a technical committee has beenestablished has the right to be represented on that committee. Interna
14、tional organizations, governmental andnon-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the InternationalElectrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rule
15、s given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standardsadopted by the technical committees are circulated to the member bodies for voting. Publication as anInternational Standard requires approval by at leas
16、t 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 14518 was prepared by Technical Committee ISO/TC 96, Cra
17、nes, Subcommittee SC 4, Test methods.SANS 14518:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ivSANS 14518:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .INTERNATIONAL STAND
18、ARD ISO 14518:2005(E) ISO 2005 All rights reserved 1Cranes Requirements for test loads1ScopeThis International Standard establishes methods for composition and measurement of test loads; procedures for the application of test loads during the testing of cranes.This International Standard was develop
19、ed in addition to ISO 4310 and covers the types of cranes described inISO 4306-1.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For datedreferences, only the edition cited applies. For undated references, the latest edition of the ref
20、erenced document(including any amendments) applies.ISO 4306-1, Cranes Vocabulary Part 1: GeneralISO 4310, Cranes Test code and proceduresISO 7363, Cranes and lifting appliances Technical characteristics and acceptance documentsISO 9373, Cranes and related equipment Accuracy requirements for measurin
21、g parameters during testing3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1 test loadload designed for crane testing, which may consist of one or several components3.2 direct method of measuring the mass of a test loaddetermining the mass of a t
22、est load by weighing3.3 combined method of measuring the mass of a test loaddetermining the mass of a test load by calculating the sum of the masses of its components as determined bythe direct method and/or calculation3.4 application of test loadaction whereby the mass of a test load is transferred
23、 to the structure of the crane during the testing cycleSANS 14518:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14518:2005(E)2 ISO 2005 All rights reserved4 Composition and measurement of test loads4.1 Composition and requirements f
24、or test loads4.1.1 A test load may be a single unit or made up of several components.4.1.2 The components of a test load may be individual units in the form of steel and/or other type (e.g. concrete) blocks; containers filled with water, sand or other granular material with homogeneous density.NOTE
25、A container for containing test loads can be any containment capable of safely bearing the test load (e.g. rubber bagwith water, rigid box with sand, etc.).4.1.3 A container used as a test load should be strong enough to withstand the pressure of the water or other granular filler material; be of a
26、simple (rectangular or cylindrical) shape and shall have marks on interior wall to show the volume ofwater or other granular material to simplify the calculations; have an effective means to drain off the water or remove the filler material after testing.4.2 Equipment for measuring the test load and
27、 accuracy of measurements4.2.1 The equipment for measuring the mass of a test load shall be selected in compliance with nationalspecifications.4.2.2 The number of measurements and the accuracy of measuring the mass of a test load shall be inaccordance with ISO 9373.These requirements shall satisfy b
28、oth the direct and combined methods of measuring the mass of a test load.4.3 Measuring the mass of a test load by the direct method4.3.1 The direct method can be used to measure both the mass of a single load and the total mass of a loadcomposed of several components.4.3.2 The test load to be measur
29、ed shall be placed on a floor scale or lifted to off the floor bya crane equipped with a weight-measuring device. The result of the measurement shall be recorded in thereport.4.4 Determining the mass of a test load by the combined method4.4.1 Determining the mass of a test load as a sum of masses of
30、 its components is recommended for usewhere the test load can be made up of several components with known masses, each of which was measuredby the direct method.In this case, the total mass of the test load shall be calculated as the sum of the masses of the components.4.4.2 Determining the mass of
31、a test load as the sum of the masses of a container and its content isrecommended for use where the test load is a container filled with water, sand or other granular material.The mass of the container shall be measured by the direct method. The mass of the content inside the containershall be weigh
32、ed or calculated as the product of the density of the content by the volume it occupies. Thevolume of the content occupied in the container shall be calculated based on the volume marks. The total massof the test load shall be calculated as the sum of the mass of the empty container and the mass of
33、content. Theresult shall be recorded in the report.100 mm 200 mmSANS 14518:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14518:2005(E) ISO 2005 All rights reserved 35 Application of test loads5.1 Preparation of test loadsLoads to be
34、 prepared for testing shall be in accordance with the crane rated capacity and the type of tests to beconducted (static tests, stability tests, or dynamic tests) as specified by ISO 4310.5.2 Procedure5.2.1 The procedure for loading the crane for testing shall be in accordance with the crane manufact
35、urerrequirements.5.2.2 A gradually increasing test load may be used in static and stability tests, as specified by ISO 4310 andISO 7363.6 Test reportThe test report on the measurement of a test load mass may be submitted as the independent document or asa part of the complete report about test of th
36、e crane and should include the following data:a) general data for the load;b) name and address of the organization/person that made the measurements and calculations of the loadmass;c) date and place of the measurements;d) equipment used for the measurement and data of its registration and last cali
37、bration;e) result of the measurements and/or calculations of the test load mass.SANS 14518:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 14518:2005(E)4 ISO 2005 All rights reservedBibliography1 ISO 4301-1, Cranes and lifting appliances Classification Part 1: GeneralSANS 14518:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .
