SANS 252-2003 Metallic hose assemblies for liquid petroleum gases and liquefied natural gases《液化石油气和液化天然气用金属软管组件》.pdf

相关资源

JB T 8774.15-1998 机床电气系统辅件 包塑金属软管.pdf

JB T 8774.5-1998 机床电气系统辅件 铠装纺织金属软管管接头.pdf

JB T 8774.6-1998 机床电气系统辅件 包塑金属软管端接式管接头.pdf

GB T 14525-1993 波纹金属软管通用技术条件.pdf

QJ 1623-1989 航天中压金属软管通用技术条件.pdf

SH T 3412-1999 石油化工管道用金属软管 选用、检验及验收.pdf

SY T 4073-1994 储罐抗震用金属软管和波纹补偿器选用标准.pdf

YB T 023-1992 金属软管用碳素钢冷轧钢带.pdf

HB 7882-2008 金属软管组件通用规范.pdf

JB T 8774.15-1998 机床电气系统辅件.包塑金属软管.pdf

猜你喜欢

SAE AS 9771-1998 PACKING PREFORMED C AMS3650 SEAL《FSC 5330 AMS 3650预成型密封圈》.pdf

SAE AS 9772-1998 PACKING PREFORMED C AMS3617 O RING《预成型包装-AMS 3617 O形圈 注 2005-05-00批准》.pdf

SAE AS 9796B-2015 BOLT MACHINE - HEXAGON HEAD DRILLED 1 HOLE FULL SHANK CRES (UNS S17400) 3125-24 UNJF-3A.pdf

SAE AS 9805-1998 BOLT MACHINE-HEXAGON HEAD PD SHANK AMS 5643 190-32 UNJF-3A《AMS 5643 PD杆六角头机器螺栓 190-32 UNJF-3A》.pdf

SAE AS 9821-1998 Bolt Machine - Hexagon Head Drilled 1 Hole PD Shank AMS 5643 500-20 UNJF-3A《AMS 5643 PD杆1钻孔六角头机器螺栓 500-20 UNJF-3A》.pdf

SAE AS 9841-1999 KEY WOODRUFF C CHAMFERED CRES AMS5640《半圆键 刻槽耐腐蚀钢AMS 5640 FSC 5315》.pdf

SAE AS 9842A-2004 Pin Straight Headed 0937 Diameter UNS S41800《 0937直径 UNS S41800直柄头销钉》.pdf

SAE AS 9843A-2004 PIN STRAIGHT HEADED 1249 DIAMETER UNS S41800《直柄、有头、直径为0 1249的销钉 UNS S41800》.pdf

SAE AS 9844A-2004 PIN STRAIGHT HEADED 1874 DIAMETER UNS S41800《直柄、有头、直径为0 1874的销钉 UNS S41800》.pdf