SANS 5123-2005 Paints and varnishes - Apparent water absorption of paint films《色漆和清漆 涂膜的视吸水率》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM B527-2006 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds《测定金属粉末及化合物的塔普(Tap)密度的标准试验方法》.pdf

ASTM B527-2014 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds《测定金属粉末和化合物的塔普密度的标准试验方法》.pdf

ASTM B527-2015 Standard Test Method for Tap Density of Metal Powders and Compounds《金属粉末和化合物振实密度的标准试验方法》.pdf

ASTM B528-2005 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens《金属粉末试样的横向断裂强度的标准试验方法》.pdf

ASTM B528-2010 Standard Test Method for Transverse Rupture Strength of Metal Powder Specimens《金属粉末试样的横断裂强度的标准试验方法》.pdf

ASTM B528-2012 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens《金属粉末(PM)试样的横向断裂强度的标准试验方法》.pdf

ASTM B528-2016 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens《粉末冶金(PM)试样横向断裂强度的标准试验方法》.pdf

ASTM B530-2002 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates《用磁性法测量磁性和非.pdf

ASTM B530-2009 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates《用磁性法测量磁性和非.pdf