1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21727-3 SANS 53763-8:2008Edition 1EN 13763-8:2003Edition 1SOUTH AFRICAN NATIONAL STANDARD Explosives for civil uses Detonators and relays
4、Part 8: Determination of the resistance to vibration of plain detonators This national standard is the identical implementation of EN 13763-8:2003 and is adopted with the permission of the CEN, rue de Stassart 36, B-1050 Brussels. Published by Standards South Africa 1 dr lategan road groenkloof priv
5、ate bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 53763-8:2008 Edition 1 EN 13763-8:2003 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Commit
6、tee StanSA TC 5140.04, Explosives and detonators, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in August 2008. EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13763-8November 2003ICS 71.100.30English versi
7、onExplosives for civil uses - Detonators and relays - Part 8:Determination of the resistance to vibration of plain detonatorsExplosifs usage civil - Dtonateurs et relais - Partie 8:Dtermination de la rsistance aux vibrations de la chargede dtonateurExplosivstoffe fr zivile Zwecke - Znder undVerzgeru
8、ngselemente - Teil 8: Bestimmung desWiderstandes von Sprengkapseln gegen ErschtterungThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of
9、a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in
10、any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany,
11、 Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels
12、2003 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-8:2003 ESANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 13763-8:2003 (E)2Contents pageForeword3I
13、ntroduction .51 Scope 52 Normative references 53 Terms and definitions54 Apparatus .65 Test pieces76 Procedure .77 Test report 8Annex A (informative) Range of applicability of the test method.9Annex ZA (informative) Clauses of this European Standard addressing essential requirements or otherprovisio
14、ns of EU Directives. .10SANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 13763-8:2003 (E)3ForewordThis document (EN 13763-8:2003) has been prepared by Technical Committee CEN/TC 321 “Explosives for civiluses“, the secretari
15、at of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest byMay 2004.This document has been prepared
16、 under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard is one of a s
17、eries of standards with the generic title Explosives for civil uses Detonatorsand relays. The other parts of this series are listed below:prEN 13763-1 Part 1: RequirementsEN 13763-2 Part 2: Determination of thermal stabilityEN 13763-3 Part 3: Determination of sensitiveness to impactEN 13763-4 Part 4
18、: Determination of resistance to abrasion of leading wires and shock tubesEN 13763-5 Part 5: Determination of resistance to cutting damage of leading wires and shock tubesEN 13763-6 Part 6: Determination of resistance to cracking at low temperatures of leading wiresEN 13763-7 Part 7: Determination o
19、f the mechanical strength of leading wires, shock tubes, connections,crimps and closuresEN 13763-9 Part 9: Determination of resistance to bending of detonatorsEN 13763-11 Part 11: Determination of resistance to damage by dropping of detonators and relaysEN 13763-12 Part 12: Determination of resistan
20、ce to hydrostatic pressureprEN 13763-13 Part 13: Determination of resistance of electric detonators against electrostatic dischargeprEN 13763-15 Part 15: Determination of equivalent initiating capabilityprEN 13763-16 Part 16: Determination of delay accuracyprEN 13763-17 Part 17: Determination of no-
21、fire current of electric detonatorsprEN 13763-18 Part 18: Determination of series firing current of electric detonatorsprEN 13763-19 Part 19: Determination of firing impulse of electric detonatorsEN 13763-20 Part 20: Determination of total electrical resistance of electric detonatorsprEN 13763-21 Pa
22、rt 21: Determination of flash-over voltage of electric detonatorsprEN 13763-22 Part 22: Determination of capacitance, insulation resistance and insulation breakdown of leadingwiresSANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SAB
23、S .EN 13763-8:2003 (E)4EN 13763-23 Part 23: Determination of the shockwave velocity of shock tubesEN 13763-24 Part 24: Determination of the electrical non-conductivity of shock tubesprEN 13763-25 Part 25: Determination of transfer capability of surface connectors and coupling accessoriesprEN 13763-2
24、6 Part 26: Definitions, methods and requirements for devices and accessories for reliable and safefunction of detonators and relays.CEN/TS 13763-27 Part 27: Definitions, methods and requirements for electronic initiation systemsAnnex A is informative.According to the CEN/CENELEC Internal Regulations
25、, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Swit
26、zerland and the United Kingdom.SANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 13763-8:2003 (E)5IntroductionDetonators can be subjected to many forces, including vibration, during use and handling. This could causematerial
27、 from the primary charge to become loose creating a risk of inadvertent initiation because of friction or otherstimuli on the loose explosive.1 ScopeThis European Standard specifies a method for assessing the ability of the explosive content of plain detonators towithstand the vibration likely to be
28、 experienced in normal use and handling.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated referenc
29、es, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 13857-1:2003; Explosives for civil us
30、es Part 1: Terminology.EN 60068-2-6; Environmental testing Part 2: Tests Test Fc: Vibration (sinusoidal) (IEC 60068-2-6:1995 +Corrigendum 1995).EN ISO/IEC 17025; General requirements for the competence of testing and calibration laboratories. (ISO/IEC17025:1999)3 Terms and definitionsFor the purpose
31、s of this European Standard, the terms and definitions given in EN 13857-1:2003 apply.SANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 13763-8:2003 (E)64 Apparatus4.1 Vibrating table, in accordance with EN 60068-2-6, with a
32、 horizontal vibrating plate and a vibrator (e.g.electromagnetic vibrator) designed, when unloaded, to produce at all points on its top surface vertical sinusoidalvibrations at a frequency of 50 Hz and of identical amplitude. An example of a vibrating table is shown in Figure 1.Key1 Detonator holder2
33、 Detonator holder anchorage3 Vibrating plate4 Vibrator5 BaseFigure 1 Example of vibration table4.2 Detonator holder made of metal and/or hard plastics, designed to be fixed securely in the centre of thevibrating plate and incorporating vertical detonator holder pockets of dimensions suitable for hol
34、ding thedetonator(s) under test. These pockets shall be capable of being closed by screw-in plugs, as shown in Figure 2.SANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 13763-8:2003 (E)7Key1 Screw-in plug2 Spacer3 Detonator
35、 charge4 Detonator shellFigure 2 Example of pocket in detonator holder4.3 Spacers, a set of spacers of different heights to secure the detonators in place in the detonator holderpockets.4.4 Weighing machine, capable of weighing to an accuracy of G01 1 mg.5 Test piecesSelect 25 detonators of the same
36、 type, with the same design and composition of charge and the same loadingconfiguration of charge.6 Procedure6.1 GeneralCondition the twenty-five detonators for 2 h at (20 G01 2) G02C and relative humidity not greater than 50 % prior totesting.The overall test run comprises 25 determinations as desc
37、ribed below.6.2 Weighing of the detonatorsWeigh each detonator and record its mass m0in milligrams (mg).SANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN 13763-8:2003 (E)86.3 Insertion of detonatorsPlace each detonator, base
38、 uppermost, into an empty pocket in the detonator holder (see Figure 2).Place a spacer of suitable dimensions on the base of the detonator to maintain it in position in the pocket after thishas been closed.Close the pocket using the screw-in plug.6.4 Vibration of detonatorsPerform the test according
39、 to EN 60068-2-6 with the following procedure:With the 25 detonators in position in the pockets of the detonator holder, secure the latter firmly in place in thecentre of the vibrating table.Set the maximum vibration amplitude (zero to peak) to 0,25 mm.Start the vibrator.Stop the vibrator after 60 m
40、in.After the test, remove each detonator from its pocket, weigh it and record its final mass m in milligrams (mg).Collect with care any active material deposited in the bottom of the pockets.6.5 Calculation of resultsDetermine the loss in mass mL (if any), expressed in milligrams (mg), for each deto
41、nator using the followingequation:mL= m0- m7 Test reportThe test report shall conform to EN ISO/IEC 17025. In addition the following information shall be given:- any individual mass loss (expressed in milligrams).SANS 53763-8:2008This s tandard may only be used and printed by approved subscription a
42、nd freemailing clients of the SABS .EN 13763-8:2003 (E)9Annex A(informative)Range of applicability of the test methodRange of applicability of the test method: - 30C to + 80CSANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .EN
43、13763-8:2003 (E)10Annex ZA(informative)Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.This European standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association and supports essentia
44、l requirements of EU Directive 93/15/EEC.WARNING : Other requirements and other EU Directives may be applicable to the product(s) falling within thescope of this standard.The clauses of this standard are likely to support requirements I.1, II.1.(b) and II.1.(i) of Directive 93/15/EEC.Compliance with this standard provides one means of conforming with the specific essential requirements of theDirective concerned and associated EFTA regulations.SANS 53763-8:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .
