SANS 60793-1-22-2001 Optical fibres Part 1-22 Measurement methods and test procedures - Length measurement《光纤 第1 22部分：测量方法和试验规程 长度测量》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

FORD WSS-M4G450-A1-2013 SEALER SILANE MODIFIED POLYMER ONE COMPONENT MOISTURE CURING EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4G525-A1-2007 SEALER HOT APPLIED HEAT CURING LOW EXPANDING (50% - 100%) TO BE USED WITH FORD WSS-M99P1111-A 《低膨胀性（50%-100%）热固化热施涂密封剂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4G525-A2-2007 SEALER HOT APPLIED HEAT CURING EXPANDING (150% - 250%) TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4G525-A1)《高膨胀性(150%-250%)热固化热施涂密封剂 与标准FORD WSS-.pdf

FORD WSS-M4G525-A3-2007 SEALER HOT APPLIED HEAT CURING HIGH EXPANDING (300% - 400%) TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M4G525-A1)《高膨胀性(300%-400%)热固化热施涂密封剂 与标准FORD.pdf

FORD WSS-M4G525-A3-2016 SEALER HOT APPLIED HEAT CURING HIGH EXPANDING (300% - 400%) TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4G525-A1).pdf

FORD WSS-M4G87-B-2014 SEALER RECLAIMED RUBBER BASE EXTRUDED TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4J213-A1-2012 UNSATURATED POLYESTER LACQUER LOW PPM WAX FREE JAGUAR LAND ROVER ONLY TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4J213-A2-2012 UNSATURATED POLYESTER LACQUER LOW PPM WAX FREE ACCELERATOR JAGUAR LAND ROVER ONLY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4J213-A1).pdf

FORD WSS-M4J213-A3-2012 UNSATURATED POLYESTER LACQUER LOW PPM WAX FREE DEFOAMER JAGUAR LAND ROVER ONLY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4J213-A1).pdf