SFS B 8 83-1948 《法兰 钢铸管里的固定法兰 最大工作压力：Ⅰ-25 Ⅱ-20 和Ⅲ-20 kg cm2》.pdf

相关资源

CBM 1022-1981 船用法兰 许用温度及工作压力（草案）.pdf

HB 4-123-1983 工作压力为15kgcm'2的装有同外锥管嘴的4;5组棉线编织软管.pdf

HB 4-124-1983 工作压力为15kgcm'2的装有内锥管嘴的4;5组棉线编织软管.pdf

HB 4-130-1983 工作压力为30~120kgcm,2的装有内;外锥管嘴的4组棉线纺织软管.pdf

HB 4-131-1983 工作压力为30~120kgcm'2装有内锥管嘴的4组棉线编织软管.pdf

HB 4-132-1983 工作压力为30~120kgcm,2的装有外锥管嘴的4组棉线编织软管.pdf

HB 4-125-1983 工作压力为15kgcm'2的装有外锥管嘴的4;5组棉线编织软管.pdf

HB 4-127-1983 工作压力为15kgcm'2的装有内外锥管嘴的2组棉线编织软管.pdf

HB 4-128-1983 工作压力的15kgcm'2的装有内锥管嘴的2组棉线绵织软管.pdf

HB 4-129-1983 工作压力为15kgcm,2的装有外锥管嘴的2组棉线纺织软管.pdf

猜你喜欢

NASA-CR-2833-1977 Force and pressure tests of the GA(W)-1 airfoil with a 20% aileron and pressure tests with a 30% Fowler flap《带有20%副翼的GA(W)-1机翼力量和压力试验和带有30%福勒襟翼的压力试验》.pdf

NASA-CR-3081-1979 Wind tunnel force and pressure tests of a 21% thick general aviation airfoil with 20% aileron 25% slotted flap and 10% slot-lip spoiler《带有20%副翼 25%开缝襟翼和10%开缝唇形扰流板.pdf

NASA-CR-3176-1979 A method for predicting the noise levels of coannular jets with inverted velocity profiles《带有倒转速度剖面的喷气机噪声等级的预测方法》.pdf

NASA-CR-3295-1983 Selected advanced aerodynamics and active controls technology concepts development on a derivative B-747 aircraft《在衍生物B-747飞机上选择的先进空气动力学和主动控制技术概念的发展》.pdf

NASA-CR-33-1964 Probability functions for random responses prediction of peaks fatigue damage and catastrophic failures《随机响应概率函数 峰值 疲劳损伤和灾难性故障的预测》.pdf

NASA-CR-3449-1981 Calculation of vortex lift effect for cambered wings by the suction analogy《通过抽吸类比对拱形机翼涡流升力影响的计算》.pdf

NASA-CR-3515-1982 A computer program for wing subsonic aerodynamic performance estimates including attainable thrust and vortex lift effects《机翼亚音速空气动力学性能估计(包括可得推力和涡升力影响)的计算机程序》.pdf

NASA-CR-3576-1983 Study to determine the IFR operational profile and problems of the general aviation single pilot《测定通用航空单先导仪表飞行规则运行剖面和问题研究》.pdf

NASA-CR-3664-1983 Development of aerodynamic prediction methods for irregular planform wings《不规则平面机翼的空气动力学预测方法发展》.pdf