SIS 15 51 30-1966 Determination of corrosion inhibiting properties of lubricating greases (Emcor method)《润滑油脂缓蚀性能的测定（ Emcor法）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 9100-3-2005 en Glass containers - Vacuum lug finishes - Part 3 38 regular《玻璃容器 真空凸缘瓶口 第3部分 普通规格38 ISO 9100-3-2005》.pdf

EN ISO 9100-4-2005 en Glass containers - Vacuum lug finishes - Part 4 38 medium《玻璃容器 真空凸缘瓶口 第4部分 中型38 ISO 9100-4-2005》.pdf

EN ISO 9100-5-2005 en Glass containers - Vacuum lug finishes - Part 5 43 and 48 regular《玻璃容器 真空凸缘瓶口 第5部分 普通规格43 和48 ISO 9100-5-2005》.pdf

EN ISO 9100-6-2005 en Glass containers - Vacuum lug finishes - Part 6 53 and 58 regular《玻璃容器 真空凸缘瓶口 第6部分 普通规格53和58 ISO 9100-6-2005》.pdf

EN ISO 9100-7-2005 en Glass containers - Vacuum lug finishes - Part 7 58 deep《玻璃容器 真空凸缘瓶口 第7部分 深度为58 ISO 9100-7-2005》.pdf

EN ISO 9100-8-2005 en Glass containers - Vacuum lug finishes - Part 8 63 66 and 70 regular《玻璃容器 真空凸缘瓶口 第8部分 普通规格63 66和70 ISO 9100-8-2005》.pdf

EN ISO 9100-9-2005 en Glass containers - Vacuum lug finishes - Part 9 63 66 and 70 deep《玻璃容器 真空凸缘瓶口 第9部分 深度为63 66和70 ISO 9100-9-2005》.pdf

EN ISO 9117-1-2009 en Paints and varnishes - Drying tests - Part 1 Determination of through-dry state and through-dry time《油漆和清漆 干燥试验 第1部分 通干状态和通干时间的测定》.pdf

EN ISO 9117-2-2010 en Paints and varnishes - Drying tests - Part 2 Pressure test for stackability《色漆和清漆 干燥试验 第2部分 耐码垛性试［代替 CEN EN ISO 4622］》.pdf