SIS SS 11 01 80-1985 Metallic materials - Sampling for hardness testing《金属材料 硬度试验采样》.pdf

相关资源

JIS Z 2201-1998 中文版 金属材料拉伸试验.pdf

JIS Z 2201-1998 英文版 金属材料抗拉试验用试样.pdf

JIS Z 2242-2005 金属材料冲击试验方法.pdf

JIS Z 2254-2008 中文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 2254-2008 英文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 3422-1-2003 金属材料焊接程序规范及认可.焊接程序试验.第1部分钢的电弧焊及气焊和镍及镍合金的电弧焊.pdf

JIS Z3420-2003 金属材料焊接过程的规范及认可.总则 Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding.pdf

JIS G0564-1999 金属材料.平面应变断裂强度的测定.pdf

JIS H7503-2003 超塑变形金属材料孔穴体积百分率的测量方法.pdf

YB T 5293-2006 金属材料.顶锻试验方法.pdf

猜你喜欢

BS EN 868-5-2009 Packaging for terminally sterilized medical devices - Sealable pouches and reels of porous and plastic film construction - Requirements and test methods《最终灭菌医疗器械的包.pdf

BS EN 868-6-2017 Packaging for terminally sterilized medical devices Paper for low temperature sterilization processes Requirements and test methods《最终灭菌医疗器械的包装 低温灭菌处理用纸 试验方法和要求》.pdf

BS EN 868-7-2017 Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes Requirements and test methods《最终灭菌医疗器械的包装 低温消.pdf

BS EN 868-8-2009 Packaging for terminally sterilized medical devices - Re-usable sterilization containers for steam sterilizers conforming to EN 285 Requirements and test methods《最.pdf

BS EN 868-9-2009 Packaging for terminally sterilized medical devices - Uncoated nonwoven materials of polyolefines - Requirements and test methods《最终灭菌医疗器械的包装 聚烯烃非包覆非织物材料 试验方法和要求》.pdf

BS EN 872-2005 Water quality - Determination of suspended solids - Method by filtration through glass fibre filters《水质 悬浮固体的测定 玻璃纤维过滤器过滤的方法》.pdf

BS EN 878-2016 Chemicals used for treatment of water intended for human consumption Aluminium sulfate《人类生活用水处理用化学试剂 硫酸铝》.pdf

BS EN 88-1-2011 Pressure regulators and associated safety devices for gas appliances Pressure regulators for inlet pressures up to and including 50 kPa《燃气器具用压力调节器和相关安全装置 入口压力最大为50 .pdf

BS EN 88-2-2007 Pressure regulators and associated safety devices for gas appliances - Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar《燃气器具用压力调节器和相.pdf