SIS SS 11 26 55-1983 Metallic materials - Wire - Simple torsion test《金属材料 线简单扭转试验》.pdf

相关资源

JIS Z 2201-1998 中文版 金属材料拉伸试验.pdf

JIS Z 2201-1998 英文版 金属材料抗拉试验用试样.pdf

JIS Z 2242-2005 金属材料冲击试验方法.pdf

JIS Z 2254-2008 中文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 2254-2008 英文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 3422-1-2003 金属材料焊接程序规范及认可.焊接程序试验.第1部分钢的电弧焊及气焊和镍及镍合金的电弧焊.pdf

JIS Z3420-2003 金属材料焊接过程的规范及认可.总则 Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding.pdf

JIS G0564-1999 金属材料.平面应变断裂强度的测定.pdf

JIS H7503-2003 超塑变形金属材料孔穴体积百分率的测量方法.pdf

YB T 5293-2006 金属材料.顶锻试验方法.pdf

猜你喜欢

CSN IEC 768-1993 Process stream radiation monitoring equipment in light water nuclear reactors for normal operating and incident conditions《轻水核反应堆在正常运行和事故工况下的工艺物流辐射监测设备》.pdf

CSN IEC 782-1993 Measurements of ultrasonic magnetostrictive transducers《超声波磁致伸缩传感器测量》.pdf

CSN IEC 794-1-1993 Optical fibre cables Part 1 Generic specifications《光缆 第1部分 一般规格》.pdf

CSN IEC 816-1994 Guide on methods of measurement of short duration transients on low-voltage power and signal lines《低电压电力信号线路瞬变信号的测量方法指南》.pdf

CSN IEC 854-1993 Methods of measuring the performance of ultrasonic pulse-echo diagnostic equipment《超声脉冲回波诊断设备性能测量方法》.pdf

CSN IEC 878-1993 Graphical symbols for electrical equipment in medical practice《医疗应用中的电气设备图形符号》.pdf

CSN IEC 910-1994 Containment monitoring instrumentation for early detection of developing deviations from normal operation in light water reactors《对逐渐偏离轻水反应堆正常运行状态进行早期探测的安全壳监测仪表》.pdf

CSN IEC 911-1993 Measurements for monitoring adequate cooling within the core of pressurized light water reactors《监测受压轻水反应堆堆芯充分冷却测量法》.pdf

CSN IEC 913-1993 Electric traction overhead lines《电力牵引架空线路》.pdf