SIS SS-ISO 4672-1990 Rubber and plastics hoses Sub-ambient temperature flexibility tests《橡胶和塑料软管 低温适应性试验》.pdf

相关资源

JIS K6330-1-2003 橡胶和塑料软管的测试方法.第1部分软管和软管组件尺寸的测量方法.pdf

JIS K6330-10-1998 橡胶和塑料软管的试验方法.第10部分通过软管壁对液体传输进行的测定.pdf

JIS K6330-2-1998 橡胶和塑料软管的测试方法.第2部分液体静力法.pdf

JIS K6330-8-1998 橡胶和塑料软管的试验方法.第8部分无收缩的液压脉冲试验.pdf

JIS K6330-9-2003 橡胶和塑料软管的测试方法.第9部分软管和管件的弯曲性能.pdf

JIS K6375-1999 塑料软管和软管组件.液压型织物增强的热塑性塑料.规范.pdf

JIS K6330-3-1998 橡胶和塑料软管的测试方法.第2部分抽吸阻力的测定.pdf

JIS K6330-4-2003 橡胶和塑料软管的测试方法.第4部分低于室温的弯曲试验.pdf

JIS K6330-5-1998 橡胶和塑料软管的试验方法.第5部分电阻的测定.pdf

JIS K6330-6-1998 橡胶和塑料软管的测试方法.第6部分部件间附着力的测定.pdf

猜你喜欢

SAE AS 9887A-2012 BOLT MACHINE-DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK AMS5616 3125-24 UNJF-3A《机械式双六角形扩展垫圈头 PD柄AMS 5616 3125-24 UNJF-3A螺栓》.pdf

SAE AS 9894A-2015 Bolt Machine-Double Hexagon Extended Washer Head Drilled AMS 5616 190-32 UNJF-3A.pdf

SAE AS 9895A-2007 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED AMS 5616 2500-28 UNJF-3A《AMS 5616 2500-28 UNJF-3A钻孔双六角延展带垫圈头的机器螺栓》.pdf

SAE AS 9895B-2017 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD PD SHANK DRILLED CORROSION RESISANT STEEL (UNS S41800) 2500-28 UNJF-3A.pdf

SAE AS 9902D-2010 PLUG MACHINE THREAD DRILLED PREFORMED PACKING AS8879 THREAD (UNS S34700)《预制包装AS8879螺纹 机器螺纹钻孔的插头(UNS S34700)》.pdf

SAE AS 9914B-2012 Bolt Machine - Double Hexagon Extended Washer Head PD Shank Steel AMS 6322 Cadmium Plated 190-32 UNJF-3A《镀镉 AMS 6322钢制 PD柄 上端垫圈延展 机械-双精度六角螺栓 190-32 UNJF-3A》.pdf

SAE AS 9928B-2015 BOLT MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD DRILLED PD SHANK CADMIUM PLATED STEEL UNS G87400 125 KSI MIN 5000-20 UNJF-3A.pdf

SAE AS 9933B-2012 Bolt Machine - Double Hexagon Extended Washer Head Full Shank Steel AMS 6322 Cadmium Plated 250-28 UNJF-3A《机制螺栓 250-28 UNJF-3A镀镉AMS 6322钢全柄双六边形延伸垫圈头》.pdf

SAE AS 9955-1998 PACKING PREFORMED - AMS3668 “O” RING《AMS 3668 O型环预制填料 注 批准于2007-06-00 2003-10-00》.pdf