SNV 37108-1966 《固定联轴器 型号 R（摩擦阻力）带有套筒，适用于圆锥形轴端 1）螺栓圆周直径的主要尺寸 k =48 190 mm》.pdf

相关资源

MT T 635-1996 矿井巷道通风摩擦阻力系数测定方法.pdf

MT T 635-1996 矿井巷道通风摩擦阻力系数.测定方法.pdf

STAS 12775-1989 CONVEYOR BELTS FOR MINE INDUSTRY Determination el friction resistance on drum《矿业输送带 鼓摩擦阻力测试 》.pdf

SAE J 2505-2010 Measurement of Vehicle-Roadway Frictional Drag《道路车辆摩擦阻力的测量》.pdf

SNV 23955E-1943 《R 型固定联轴器（摩擦阻力）凸缘冠形螺母 M68X4 M92X4》.pdf

SNV 29620-1966 Textiles Tests for colour fastness Section S03 Colour fastness to vulcanizing Open steam《固定联轴器 型号 R（摩擦阻力）概览 结合和名称》.pdf

SN 210 900 2-1986 Abrasion resistance - Martindale method《固定联轴器 型号 R（摩擦阻力）目录》.pdf

SN 219 505 21-1979 Welding of metalsExamination and supervision of weiders《固定联轴器 型号 R（摩擦阻力）带有套筒 螺栓圆周直径的详细尺寸 k = 48 190 mm》.pdf

SN 198 518-1983 Wrinkle Recovery - Monsanto《R 型固定联轴器（摩擦阻力）连接螺栓 M 8 M 27》.pdf

猜你喜欢

SIS SS-ISO 7 2-1986 Pipe threads where pressure-tight joints are made on the threads - Part 2 Veri- fication by means of limit gauges《压力密封接头在螺纹上的管螺纹 第2部分：用极限规验证》.pdf

SIS SS-ISO 700-1985 Power sources for manual metal are welding with covered electrodes and for the TIG process《带涂剂焊条手动金属电弧焊用电源和TIG焊工艺》.pdf

SIS SS-ISO 7006-1982 Woodworking machines - Diameters of spindles for receiving circular saw- blades《木工机床 接受圆形锯片的锭子直径》.pdf

SIS SS-ISO 7007-1984 Woodworking machines - Table band- sawing machines - Nomenclature and acceptance conditions《木工机床 台式带锯床 术语表及验收条件》.pdf

SIS SS-ISO 7008-1984 Woodworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions《木工机床 带或不带移动工作台的单刀片圆锯架 术语表和验收.pdf

SIS SS-ISO 7009-1984 Woodworking machines - Single spindle moulding machines- Nomenclature and acceptance conditions《木工机床 单锭模具机 术语及验收条件》.pdf

SIS SS-ISO 702-1-1992 Machine tools Spindle noses and face plates Sizes for interchangeability Part 1 Type A《机床 主轴前端和面板 尺寸互换性 第1部分：A型》.pdf

SIS SS-ISO 702-2-1992 Machine tools Spindle noses and face plates Sizes for interchangeability Part 2 Camlock type《机床 主轴前端和面板 尺寸互换性 第2部分：凸轮锁扣型》.pdf

SIS SS-ISO 702-3-1992 Machine tools Spindle noses and face plates Sizes for interchangeability Part 3 Bayonet type《机床 主轴前端和面板 尺寸互换性 第3部分：卡口型》.pdf