TCVN 2294-1978 Heat treatment of metals General safety requirements《金属热处理 一般安全要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M11P27-B-2000 ADHESION REQUIREMENT ADHESIVE FOR BONDING FRP FRP AND FRP PAINTED METAL PARTS ASSEMBLED AFTER VEHICLE ELECTROCOAT《用于在车辆完成电涂后粘合玻璃纤维增强塑料 玻璃纤维增强塑料和玻璃纤维增强塑料 涂漆金属.pdf

FORD WSB-M11P28-B-2014 ADHESION REQUIREMENTS ADHESIVE FOR BONDING LAMP ASSEMBLIES TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M11P38-C-1991 PERFORMANCE REQUIREMENTS ADHESIVE FOR BONDING PLASTIC BUMPERS《用于粘合塑料保险杠的胶粘剂的性能要求［替代 FORD ESB-M11P38-B FORD ESB-M11P38-B FORD ESB-M11P38-B FORD ESB-M11P38-B］》.pdf

FORD WSB-M11P41-B1-2013 ADHESIVE REQUIREMENTS EXTERIOR REAR VIEW MIRROR ASSEMBLY TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M11P53-A-1992 PERFORMANCE REQUIREMENTS ADHESIVE FOR BONDING PLASTIC BUMPER GUIDE BRACKETS TO BUMPER FASCIA《用于将塑料保险杠导架粘附到保险杠横梁上的胶粘剂的性能要求》.pdf

FORD WSB-M11P58-A-1995 ADHESION REQUIREMENTS ADHESIVE FOR BONDING RIGID PLASTIC TO CERAMIC PAINT COATED GLASS《用于将硬质塑料粘合到陶瓷涂料涂层玻璃上的胶粘剂的粘附力要求》.pdf

FORD WSB-M11P58-A-2016 ADHESION REQUIREMENTS ADHESIVE FOR BONDING RIGID PLASTIC TO CERAMIC PAINT-COATED GLASS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M11P59-A-1996 ADHESIVE HEADLINER REQUIREMENTS FOR BONDED IN HEADLINER《用于粘合车顶内衬的胶粘剂的要求》.pdf

FORD WSB-M11P60-A-2013 DIMENSIONAL GRAPHICS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf