TCVN 3108-1993 Fresh heavy weight concrete Method for the determination of density《重质新浇混凝土 密度的测定方法》.pdf

相关资源

TCVN 3105-1993 Heavywight fresh concrete and concrete Sampling marking and curing test specimens《重质新浇混凝土和混凝土 取样 标记和固化试样》.pdf

TCVN 3106-1993 Fresh heavyweight concrete Method slump test《重质新浇混凝土 坍落度试验方法》.pdf

TCVN 3111-1993 Fresh heavywight concrete Method for the ditermination of air content《重质新浇混凝土 空气含量的测定方法》.pdf

TCVN 3107-1993 Fresh heavy weight concrete Method for vebe test《重质新浇混凝土 维勃试验方法》.pdf

TCVN 3109-1993 Fresh heavy weight concrete Method for the determination of mortar and water segregation《重质新浇混凝土 砂浆和水隔离的测定方法》.pdf

猜你喜欢

SAE MA 3434-1987 PACKING PREFORMED - O-RING SEAL AMS 7273 METRIC《预封装 米制AMS 7273的O形密封圈》.pdf

SAE MA 3437-1987 SPACER SLEEVE - FOR 5MM BOLT AMS4901 OR AMS4921 METRIC《米制AMS 4901或AMS 4921 5 mm螺栓用垫片和紧定套》.pdf

SAE MA 3438-1987 SPACER SLEEVE - FOR 6MM BOLT AMS4901 OR AMS4921 METRIC《米制AMS 4901或AMS 4921 6 mm螺栓用垫片和紧定套》.pdf

SAE MA 3441-1989 WASHER-KEY CUP LOCK AMS5510 METRIC《公制FSC 5310 AMS 5510杯锁键垫圈》.pdf

SAE MA 3442-1987 PACKING PREFORMED - O-RING SEAL AMS 7267 METRIC《公制FSC 5330 AMS 7267预制环形密封圈》.pdf

SAE MA 3445-1988 PACKING PREFORMED O-RING SEAL FLUOROCARBON (MIL-R-83485 TYPE I) METRIC《碳氟化合物(MIL-R-83485、I型）米制、预制O型密封圈的包装》.pdf

SAE MA 3446A-1994 BOLT MACHINE - TEE HEAD CHAMFERED CLASSIFICATION 1210 MPA 730 CLOSE TOL SHANK UNS N07001 METRIC《公制FSC 5306 UNS N07001高精度杆1210 MPA 730℃倒角类丁字头机器螺栓》.pdf

SAE MA 3447-1990 Bolt Machine - Spline Drive HD Close Tol Full Shank AMS-5662 Metric《公制FSC 5306 AMS-5662高精度全杆花键传动HD机器螺栓》.pdf

SAE MA 3448-1991 Bolt Spline Drive Special Extended Washer Head Reduced Head PD Shank AMS 5708 Metric《公制FSC 5306 AMS 5708 PD杆花键传动专用扩展垫圈缩径头螺栓》.pdf