TCVN 5724-1993 Concrete and reinforced concrete structures Minimum technical conditions for execution and acceptance《混凝土和钢筋混凝土结构 实施和验收的最低技术条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M4D985-A2-2006 FLEXIBLE COVERSTOCK SLUSH MOLDABLE POLYVINYL CHLORIDE (PVC) DOOR TRIM PANEL TO BE USED WITH FORD WSS-M99P1111-A 《车门饰板SLUSH可模压聚氯乙烯（PVC）柔性护套 与标准FORD WSS-M9.pdf

FORD WSS-M4D985-A3-2010 FLEXIBLE COVERSTOCK SLUSH MOLDABLE POLYVINYL CHLORIDE (PVC) OR POLYVINYL CHLORIDE ALLOY SEAMLESS INSTRUMENT PANEL TO BE USED WITH FORD WSS-M99P1111-A 《无缝仪.pdf

FORD WSS-M4D985-A4-2017 FLEXIBLE COVERSTOCK SLUSH MOLDABLE POLYVINYL CHLORIDE (PVC) OR POLYVINYL CHLORIDE ALLOY SEAMLESS INSTRUMENT PANEL REDUCED EMISSION TO BE USED WITH FORD WSS.pdf

FORD WSS-M4D986-A-2013 POLYAMIDE (PA6) -45% GLASS FIBER REINFORCED MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D988-A-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED LOW CLTE FOR MOLDED-IN-COLOR APPLICATIONS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-.pdf

FORD WSS-M4D989-A-2013 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) 17% MINERAL FILLED CONDUCTIVE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D989-B-2014 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) CONDUCTIVE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D991-A-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) COLOR PIGMENTED UV STABILIZED LOW CLTE FOR MOLDED IN-COLOR APPLICATIONS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-.pdf

FORD WSS-M4D992-A-2005 POLYAMIDE (PA) MXD6 55% GLASS FIBER AND MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《55%玻璃纤维和矿物增强的聚酰胺（PA）成型料 与标准FORD WSS-M99P1.pdf