TCVN 7060-2009 Motorcycles Measurement method for location of centre of gravity《摩托车 重心位置的测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

ASTM D3681-2012e1 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition.pdf

ASTM D4625-2016e1 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 C (110 F)《在43摄氏度(110 F)下的中间馏分燃料储存稳定性的标准测试方法》.pdf

ASTM D4680-1998(2017) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)《采用压缩负荷法(木材对木材)测定胶粘剂静剪切蠕变和破坏时间的标准试验方法》.pdf

ASTM D4682-1987(2002) Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性》.pdf

ASTM D4682-2008 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规范》.pdf

ASTM D4682-2013 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants《二冲程循环汽油发动机润滑剂的流动性及与汽油的可混合性的标准规格》.pdf

ASTM D4682-2018 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants.pdf

ASTM D4683-2004 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator《用锥形承载模拟器在高剪切率和高温下测量粘度的标准试验方法》.pdf

ASTM D4683-2009 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 &x00.pdf