TCVN 7584-2006 Cylindrical gear for general engineering and for heavy engineering Modules《通用机械和重型机械用圆柱齿轮 模型》.pdf

相关资源

JB T 9050.2-1999 圆柱齿轮减速器 接触斑点测定方法.pdf

JB T 9050.3-1999 圆柱齿轮减速器 加载试验方法.pdf

CB- 3299-1987 船舶渐开线圆柱齿轮承载能力计算方法.pdf

HG T 3139.12-2001 釜用立式减速机 KJ系列可移式圆柱齿轮减速机.pdf

HG T 3139.3-2001 釜用立式减速机 LC系列圆柱齿轮减速机.pdf

JB T 3989.5-2014 渐开线圆柱齿轮磨齿机 第5部分：大平面砂轮磨齿机 精度检验.pdf

FZ T 90032-1992 纺织机械渐开线圆柱齿轮精度.pdf

FZ T 90047-1993 圆柱齿轮结构型式及尺寸.pdf

FZ T 90077-1995 纺织机械渐开线圆柱齿轮承载能力简化计算方法.pdf

FZ T 91018-1996 纺织机械渐开线圆柱齿轮加工工艺规范.pdf

猜你喜欢

DIN 2558-2002 Oval threaded plate - PN 6《椭圆形螺纹板材 PN 6》.pdf

DIN 2559-2-2007 Preparation of joints for welding - Part 2 Matching of inside diameters for circumferential welds on seamless tubes《焊缝边缘制备 第2部分 不锈钢无缝管圆焊缝内径配合》.pdf

DIN 2559-3-2007 Preparation of joints for welding- Part 3 Matching of inside diameters for circumferential welds on welded tubes《焊缝预加工 第3部分 焊接管道圆周焊缝的内径配合》.pdf

DIN 2559-4-1994 Preparation of welds part 4 matching of inside diameters for circumferential welds on seamless pipes of stainless steels《焊缝预加工 第4部分 不锈钢无缝管圆焊缝内径配合》.pdf

DIN 25700-1995 Measurements of surface contamination on vehicles and their loadings in exceptional situations requiring radiation protection measures《在异常条件下要求辐射防护措施的车辆及其装载物表面污染度的测量.pdf

DIN 25701-1991 Determination of the solubility of plutonium from unirradiated mixed oxide nuclear fuels in nitric acid《无放射性混合氧化物核燃料的钚在硝酸中溶解度的测定》.pdf

DIN 25703-1993 Determination of the uranium and plutonium content in nitric acid solutions by wavelength dispersive X-ray fluorescence analysis《硝酸溶液中铀含量和钚含量的测定 波长分散X射线荧光分析法》.pdf

DIN 25704-1993 Determination of the plutonium content in sulphuric and nitric acid solutions potentiometric titration method with potassium dichromate《硝酸溶液和硫酸溶液中钚含量的测定 重铬酸钾电位滴定法》.pdf

DIN 25705-1993 Ceramography of sintered nuclear fuel tablets《烧结的核燃料片的陶瓷相学》.pdf