1、 TIA-890-B September 2011 Test Application Specification (TAS) forHigh Rate Packet Data Air InterfaceNOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability
2、 and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling produ
3、cts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standa
4、rds Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicab
5、le regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0018-RV2, formulated under the cognizance of the TIA TR-45 Mobile (b
6、) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involv
7、e the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a stat
8、ement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or condit
9、ions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respect
10、s the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise),
11、whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Refer
12、ence; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identifi
13、cation to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the cont
14、ents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTE
15、LLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT
16、 OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENT
17、AL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NE
18、GATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-890-B CONTENTS i FOREWORDxiii 1 REFERENCESxv 2 1 Overview .1-1 3 1.1 Scope of This Document1-1 4 1.2 Objectives1-1 5 1.3 Requirements Language1
19、-1 6 1.4 Protocol Overview1-1 7 1.5 Basic Protocol Numbers 1-3 8 1.6 Document Organization 1-3 9 1.7 Acronyms1-5 10 1.8 Notation 1-6 11 2 Forward Test Application Protocol (FTAP) Specification 2-1 12 2.1 Overview .2-1 13 2.2 Data Encapsulation 2-1 14 2.3 Primitives and Public Data2-1 15 2.3.1 Comman
20、ds2-1 16 2.3.2 Indications 2-2 17 2.3.3 Public Data .2-2 18 2.4 Basic Protocol Numbers 2-2 19 2.5 Protocol Data Unit.2-2 20 2.6 Test Statistics .2-2 21 2.6.1 Access Terminal Requirements .2-2 22 2.6.2 Access Network Requirements 2-3 23 2.7 Procedures 2-3 24 2.7.1 Test Parameter Configuration2-4 25 2
21、.7.1.1 Access Terminal Requirements2-4 26 2.7.1.1.1 Access Terminal Configuration Initialization .2-4 27 2.7.1.1.2 Access Terminal Configuration for Lost or Closed Connection 2-4 28 2.7.1.2 Access Network Requirements.2-5 29 2.7.1.2.1 Access Network Test Statistics and Parameters Initialization2-5 3
22、0 2.7.2 Access Terminal Statistics Collection and Retrieval 2-5 31 2.7.2.1 Access Terminal Requirements2-5 32 TIA-890-B CONTENTS ii 2.7.2.1.1 Statistics Initialization. 2-6 1 2.7.2.2 Access Network Requirements 2-6 2 2.7.3 FTAP Test Packet Transmission and Reception. 2-7 3 2.7.3.1 Access Terminal Re
23、quirements . 2-7 4 2.7.3.2 Access Network Requirements 2-7 5 2.7.4 FTAP Loop Back Packet Transmission and Reception. 2-7 6 2.7.4.1 Access Terminal Requirements . 2-7 7 2.7.4.2 Access Network Requirements 2-8 8 2.7.5 DRC Channel Transmission 2-9 9 2.7.5.1 Access Terminal Requirements . 2-9 10 2.7.6 A
24、CK Channel Transmission 2-9 11 2.7.6.1 Access Terminal Requirements . 2-9 12 2.8 Message Formats 2-10 13 2.8.1 FTAPParameterAssignment. 2-10 14 2.8.1.1 DRCValueFixedMode Parameter Record 2-11 15 2.8.1.2 DRCCoverFixedMode Parameter Record 2-11 16 2.8.1.3 ACKChannelBitFixedMode Parameter Record . 2-12
25、 17 2.8.1.4 LoopBackMode Parameter Record. 2-12 18 2.8.2 FTAPParameterComplete. 2-13 19 2.8.3 FTAPStatsClearRequest 2-13 20 2.8.4 FTAPStatsClearResponse 2-14 21 2.8.5 FTAPStatsGetRequest . 2-14 22 2.8.6 FTAPStatsGetResponse. 2-15 23 2.8.6.1 IdleASPStats Statistics Record 2-15 24 2.8.6.2 ConnectedSSS
26、tats Statistics Record . 2-16 25 2.8.6.3 FirstSyncCCPktStats Statistics Record . 2-17 26 2.9 FTAP Packet Formats 2-17 27 2.9.1 FTAP Test Packet 2-17 28 2.9.2 FTAP Loop Back Packet 2-19 29 2.10 Protocol Numeric Constants . 2-21 30 2.11 Interface to Other Protocols 2-21 31 2.11.1 Commands 2-21 32 TIA-
27、890-B CONTENTS iii 2.11.2 Indications 2-21 1 3 Reverse Test Application Protocol (RTAP) Specification .3-1 2 3.1 Overview .3-1 3 3.2 Data Encapsulation 3-1 4 3.3 Primitives and Public Data3-1 5 3.3.1 Commands3-1 6 3.3.2 Indications 3-1 7 3.3.3 Public Data .3-2 8 3.4 Basic Protocol Numbers 3-2 9 3.5
28、Protocol Data Unit.3-2 10 3.6 Test Statistics .3-2 11 3.6.1 Access Network Requirements 3-2 12 3.7 Procedures 3-2 13 3.7.1 Test Parameter Configuration3-2 14 3.7.1.1 Access Terminal Requirements3-2 15 3.7.1.1.1 Access Terminal Configuration Initialization .3-3 16 3.7.1.1.2 Access Terminal Configurat
29、ion for Closed or Lost Connection 3-3 17 3.7.1.1.3 Access Terminal Test Parameter Initialization .3-3 18 3.7.1.2 Access Network Requirements.3-3 19 3.7.1.2.1 Access Network Test Statistics Initialization3-4 20 3.7.2 RTAP Packet Transmission and Reception 3-4 21 3.7.2.1 Access Terminal Requirements3-
30、4 22 3.7.2.1.1 Generation and Transmission .3-4 23 3.7.2.1.2 Rate Selection3-5 24 3.7.2.2 Access Network Requirements.3-5 25 3.8 Message Formats 3-6 26 3.8.1 RTAPParameterAssignment.3-6 27 3.8.1.1 RTAPTestPktEnable Parameter Record3-7 28 3.8.1.2 PacketRateMode Parameter Record.3-7 29 3.8.2 RTAPParam
31、eterComplete.3-8 30 3.9 RTAP Packet Formats3-9 31 3.9.1 RTAP Test Packet 3-9 32 TIA-890-B CONTENTS iv 3.9.2 RTAP Fill Packet 3-10 1 3.10 Protocol Numeric Constants . 3-10 2 3.11 Interface to Other Protocols 3-10 3 3.11.1 Commands 3-10 4 3.11.2 Indications 3-11 5 4 Forward Enhanced Test Application P
32、rotocol (FETAP) Specification. 4-1 6 4.1 Overview . 4-1 7 4.2 Data Encapsulation 4-1 8 4.3 Primitives and Public Data 4-2 9 4.3.1 Commands 4-2 10 4.3.2 Indications 4-2 11 4.3.3 Public Data . 4-2 12 4.4 Basic Protocol Numbers 4-2 13 4.5 Protocol Data Unit 4-2 14 4.6 Test Statistics . 4-2 15 4.6.1 Acc
33、ess Terminal Requirements . 4-2 16 4.6.2 Access Network Requirements 4-3 17 4.7 Procedures 4-4 18 4.7.1 Test Parameter Configuration . 4-4 19 4.7.1.1 Access Terminal Requirements . 4-4 20 4.7.1.1.1 Access Terminal Configuration Initialization. 4-5 21 4.7.1.1.2 Access Terminal Configuration for Lost
34、or Closed Connection 4-5 22 4.7.1.2 Access Network Requirements 4-6 23 4.7.1.2.1 Access Network Test Statistics and Parameters Initialization 4-6 24 4.7.2 Access Terminal Statistics Collection and Retrieval 4-6 25 4.7.2.1 Access Terminal Requirements . 4-6 26 4.7.2.1.1 Statistics Initialization. 4-7
35、 27 4.7.2.2 Access Network Requirements 4-7 28 4.7.3 PL_0_1_2 FETAP Test Packet Transmission and Reception. 4-8 29 4.7.3.1 Access Terminal Requirements . 4-8 30 4.7.3.2 Access Network Requirements 4-8 31 TIA-890-B CONTENTS v 4.7.4 PL_0_1 FETAP Loop Back Packet and PL_2 FETAP Loop Back Packet 1 Trans
36、mission and Reception 4-8 2 4.7.4.1 Access Terminal Requirements4-8 3 4.7.4.2 Access Network Requirements.4-9 4 4.7.5 DRC Channel Transmission4-12 5 4.7.5.1 Access Terminal Requirements4-12 6 4.7.6 ACK Channel Transmission 4-12 7 4.7.6.1 Access Terminal Requirements4-12 8 4.8 Message Formats 4-12 9
37、4.8.1 FETAPParameterAssignment.4-12 10 4.8.1.1 DRCValueFixedMode Parameter Record4-13 11 4.8.1.2 DRCCoverFixedMode Parameter Record4-14 12 4.8.1.3 ACKChannelBitFixedMode Parameter Record .4-14 13 4.8.1.4 LoopBackMode Parameter Record .4-15 14 4.8.1.5 ACKChannelModulationTypeFixedMode Parameter Recor
38、d.4-15 15 4.8.2 FETAPParameterComplete 4-16 16 4.8.3 FETAPStatsClearRequest 4-16 17 4.8.4 FETAPStatsClearResponse 4-17 18 4.8.5 FETAPStatsGetRequest .4-17 19 4.8.6 FETAPStatsGetResponse.4-18 20 4.8.6.1 IdleASPStats Statistics Record 4-19 21 4.8.6.2 ConnectedSSStats Statistics Record .4-19 22 4.8.6.3
39、 FirstSyncCCPktStats Statistics Record .4-20 23 4.9 FETAP Packet Formats4-21 24 4.9.1 PL_0_1_2 FETAP Test Packet.4-21 25 4.9.2 PL_0_1 FETAP Loop Back Packet 4-22 26 4.9.3 PL_2 FETAP Loop Back Packet4-24 27 4.10 Protocol Numeric Constants4-26 28 4.11 Interface to Other Protocols.4-27 29 4.11.1 Comman
40、ds4-27 30 4.11.2 Indications 4-27 31 5 Reverse Enhanced Test Application Protocol (RETAP) Specification5-1 32 5.1 Overview .5-1 33 TIA-890-B CONTENTS vi 5.2 Data Encapsulation 5-1 1 5.3 Primitives and Public Data 5-2 2 5.3.1 Commands 5-2 3 5.3.2 Indications 5-2 4 5.3.3 Public Data . 5-2 5 5.4 Basic
41、Protocol Numbers 5-2 6 5.5 Protocol Data Unit 5-2 7 5.6 Test Statistics . 5-2 8 5.6.1 Access Terminal Requirements . 5-2 9 5.6.2 Access Network Requirements 5-3 10 5.7 Procedures 5-3 11 5.7.1 Test Parameter Configuration . 5-4 12 5.7.1.1 Access Terminal Requirements . 5-4 13 5.7.1.1.1 Access Termina
42、l Configuration Initialization. 5-5 14 5.7.1.1.2 Access Terminal Configuration for Closed or Lost Connection 5-5 15 5.7.1.1.3 Access Terminal Test Parameter Initialization. 5-5 16 5.7.1.2 Access Network Requirements 5-6 17 5.7.1.2.1 Access Network Test Statistics Initialization . 5-6 18 5.7.2 Access
43、 Terminal Statistics Collection and Retrieval 5-6 19 5.7.2.1 Access Terminal Requirements . 5-6 20 5.7.2.1.1 Statistics Initialization. 5-7 21 5.7.2.2 Access Network Requirements 5-7 22 5.7.3 PL_0_1 RETAP Packet and PL_2 RETAP Packet Transmission and 23 Reception . 5-7 24 5.7.3.1 Access Terminal Req
44、uirements . 5-7 25 5.7.3.1.1 Generation and Transmission . 5-7 26 5.7.3.1.2 Rate Selection . 5-9 27 5.7.3.1.3 Payload Size Selection. 5-9 28 5.7.3.2 Access Network Requirements 5-10 29 5.8 Message Formats 5-12 30 5.8.1 RETAPParameterAssignment 5-12 31 5.8.1.1 RETAPTestPktEnable Parameter Record . 5-
45、13 32 TIA-890-B CONTENTS vii 5.8.1.2 PacketRateMode Parameter Record.5-13 1 5.8.1.3 PacketPayloadSizeMode Parameter Record5-14 2 5.8.1.4 EnhancedAccessChannelRateMode Parameter Record5-16 3 5.8.1.5 BurstPeriodMode Parameter Record5-17 4 5.8.1.6 BurstSizeMode Parameter Record .5-18 5 5.8.2 RETAPParam
46、eterComplete 5-19 6 5.8.3 RETAPStatsClearRequest 5-19 7 5.8.4 RETAPStatsClearResponse5-20 8 5.8.5 RETAPStatsGetRequest.5-20 9 5.8.6 RETAPStatsGetResponse.5-21 10 5.8.6.1 Vi(SPL_2Rev)Stats Statistics Record.5-22 11 5.9 RETAP Packet Formats .5-23 12 5.9.1 PL_0_1 RETAP Test Packet5-23 13 5.9.2 PL_0_1 R
47、ETAP Fill Packet .5-24 14 5.9.3 PL_2 RETAP Test Packet .5-25 15 5.10 Protocol Numeric Constants5-27 16 5.11 Interface to Other Protocols.5-27 17 5.11.1 Commands5-27 18 5.11.2 Indications 5-27 19 6 Forward Multicarrier Test Application Protocol (FMCTAP) Specification .6-1 20 6.1 Overview .6-1 21 6.2
48、Data Encapsulation 6-1 22 6.3 Primitives and Public Data6-2 23 6.3.1 Commands6-2 24 6.3.2 Indications 6-2 25 6.3.3 Public Data .6-2 26 6.4 Basic Protocol Numbers 6-2 27 6.5 Protocol Data Unit.6-2 28 6.6 Test Statistics .6-2 29 6.6.1 Access Terminal Requirements .6-2 30 6.6.2 Access Network Requireme
49、nts 6-3 31 6.7 Procedures 6-4 32 TIA-890-B CONTENTS viii 6.7.1 Test Parameter Configuration . 6-5 1 6.7.1.1 Access Terminal Requirements . 6-5 2 6.7.1.1.1 Access Terminal Configuration Initialization. 6-6 3 6.7.1.1.2 Access Terminal Configuration for Lost or Closed Connection 6-7 4 6.7.1.2 Access Network Requirements 6-7 5 6.7.1.2.1 Access Network Test Statistics and Parameters Initialization 6-7 6 6.7.2 Access Terminal Statistics Collection and Retrieval 6-8 7 6.7.2.1 Access Terminal Requirements . 6-8 8 6.7.2.1.1 Statistics Initialization. 6-9 9 6.7.2.2 Access Network Requirements 6-9 10
