TIS 122-1975 Standard for lead content in plastic toys《塑料玩具中的铅含量标准》.pdf

相关资源

SN T 0957-2000 进出口塑料玩具检验规程.pdf

SN T 2438.6-2011 进出口玩具检验规程 第6部分：塑料玩具.pdf

SN T 2438.6-2011 进出口玩具检验规程 第6部分：塑料玩具.pdf

STAS 7143-1984 PLASTIC TOYS Sanitnry-hygenic requirements and cheking methods《塑料玩具 卫生要求和检测方法 》.pdf

CNS 15138-2007 Method of test for determination of plasticizers from plastic toys《塑料玩具中邻苯二甲酸酯类可塑剂检验法》.pdf

NC 98-54-1984 Domestics Plastic Toyes Safety Requirements and Testing Methods《家用塑料玩具的安全要求和测试方法》.pdf

ONORM S 1556-1985 Safety of toys properties of plastic toys that are espected fo be taken in the mouth《玩具安全性 可被放入嘴的塑料玩具的性能》.pdf

猜你喜欢

FORD WSK-M4D794-A-2006 POLYAMIDE (PA) 66 HEAT STABILIZED IMPACT MODIFIED BLOW MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D666-A)《受热稳定的冲击改性聚酰胺66吹塑成型料 与标准FORD.pdf

FORD WSK-M4D795-A-2010 POLYAMIDE 66 (PA66) HEAT STABILIZED MOLYBDENUM DISULFIDE FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《二硫化钼填充的聚酰胺66受热稳定的成型料 与标准FORD WSS-M99.pdf

FORD WSK-M4D796-A1-2010 POLYCARBONATE (PC) MODIFIED HIGH HEAT RESISTANT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《改良的耐高温聚碳酸酯(PC)模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS.pdf

FORD WSK-M4D796-A2-2010 POLYCARBONATE (PC) MODIFIED HIGH HEAT RESISTANT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《改良的耐高温聚碳酸酯(PC)模塑材料 与福特WSS-M99P1111-A 一起使用.pdf

FORD WSK-M4D797-A-2010 POLYCARBONATE (PC) 22% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《22%玻璃纤维增强聚碳酸酯(PC)模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS.pdf

FORD WSK-M4D798-A-2010 POLYETHYLENE (PE) LOW DENSITY FLEXIBLE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《低密度柔性聚乙烯（PE）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M4D799-A-2012 POLYETHYLENE (PE) MEDIUM DENSITY LOW MELT FLOW RATE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《中等密度 低熔态流动率的聚乙烯(PE)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSK-M4D800-A-2010 POLYETHYLENE (PE) HIGH DENSITY HIGH MELT FLOW RATE LOW IMPACT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《高密度高熔体流速低抗冲聚乙烯（PE）成型料 与标准FORD WSS-M99P.pdf

FORD WSK-M4D801-A-2010 POLYAMIDE (PA) 12 RIGID HEAT STABILIZED 12% GRAPHITE FILLED MOLDING AND EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《12%石墨填充的受热稳定的刚性聚酰胺12模塑和挤塑成型.pdf