TIS 2097-2001 Liguid chemical products for industrial use-determination of density at 20℃《工业用液态化学品 20℃时的密度测定》.pdf

相关资源

MT 39-1987 岩石真密度测定方法.pdf

JIS K6268-1998 硫化橡胶—密度测定.pdf

JIS M8717-1993 铁矿石的密度测定方法.pdf

HB 5367.7-1986 碳石墨密封材料密度测定方法.pdf

HG T 3055-2012 胶乳海绵表观密度测定.pdf

SN T 0056-1992 进口化学纤维线密度测定 振动仪法.pdf

LY T 2718-2016 人造板剖面密度测定方法.pdf

HG T 2412.3-1992 橡胶胶丝试验方法橡胶胶丝密度测定.pdf

JB T 3584-2012 超硬磨料 堆积密度测定方法.pdf

JB T 3584-1999 超硬磨料 堆积密度测定方法.pdf

猜你喜欢

FORD WSK-M4D689-A4-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 95 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为95 A的聚氯乙烯(PVC)柔性材料 列于标准WSK-.pdf

FORD WSK-M4D689-A5-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 75 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为75 A的柔性聚氯乙烯(PVC) 与标准FORD WS.pdf

FORD WSK-M4D689-A6-2012 POLYVINYL CHLORIDE (PVC) FLEXIBLE 65 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D689-A1).pdf

FORD WSK-M4D689-A7-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 60 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为60 A的柔性聚氯乙烯(PVC) 与标准FORD WS.pdf

FORD WSK-M4D692-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D55的乙醚弹性体(T.pdf

FORD WSK-M4D692-A2-1989 THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS HEAT STABILIZED EXTRUSION MOLDING COMPOUND (Shown on WSK-M4D692-A1)《硬度为55 D的热塑性聚酯-乙醚.pdf

FORD WSK-M4D693-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D55的乙醚弹性体(T.pdf

FORD WSK-M4D693-A2-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS BLACK INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD.pdf

FORD WSK-M4D694-A-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 63 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D63的乙醚弹性体(TEEE)模塑材料热塑性.pdf