TS 2193-1977 HEAT INSULATING MATERIALS RIGID FOAMED PLASTICS AS INSULATING BUILDING MATERIALS《作为隔离建筑材料和隔热材料硬质泡沫塑料》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1451-2007 建筑材料及建筑构件的磨耗试验方法 (采用回转圆盘磨擦与冲击地板材料的磨耗试验方法).pdf

JIS A1452-1972 建筑材料及建筑构件的磨耗试验方法(落砂法).pdf

JIS A1415-1999 聚合物建筑材料暴露于试验室光源的方法.pdf

JIS A1470-1-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第1部分：湿度变化效应.pdf

JIS A1481-2006 建筑材料产品的石棉测定.pdf

JIS A1470-2-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第2部分：温度效应.pdf

JIS A1453-1973 建筑材料及建筑构件的磨耗试验方法(砂纸法).pdf

DL T 5388-2007 水电水利工程天然建筑材料勘察规程.pdf

猜你喜欢

SAE AS 4796C-2010 HOSE ASSEMBLY LINED SILICONE 125 PSI FIXED CAVITY COUPLING POTABLE WATER STRAIGHT FEMALE TO STRAIGHT MALE《软管接头 内衬硅胶 125 psi 固定空腔耦合 饮用水 直阴对直阳》.pdf

SAE AS 4797C-2010 HOSE ASSEMBLY LINED SILICONE 125 PSI FIXED CAVITY COUPLING POTABLE WATER STRAIGHT FEMALE TO 45 DEGREES MALE《阴性直通对阳性45的饮用水固定空腔耦合125 psi内衬硅胶软管总成》.pdf

SAE AS 4798C-2010 HOSE ASSEMBLY LINED SILICONE 125 PSI FIXED CAVITY COUPLING POTABLE WATER STRAIGHT FEMALE TO 90 DEGREES MALE《阴性直通对阳性90的饮用水固定空腔耦合125 psi内衬硅胶软管总成》.pdf

SAE AS 4799B-2016 HOSE ASSEMBLY LINED SILICONE 125 PSI FIXED CAVITY COUPLING POTABLE WATER STRAIGHT FEMALE TO STRAIGHT FEMALE.pdf

SAE AS 47B-2013 PUMP FUEL MOUNTING PAD AND DRIVE《泵 燃料 安装垫和驱动器》.pdf

SAE AS 4800B-2007 HOSE ASSEMBLY LINED SILICONE 125 PSI FIXED CAVITY COUPLING POTABLE WATER STRAIGHT FEMALE TO 45 EMALE《直内螺纹对45内螺纹饮用水用固定空腔耦合125psi线状硅氧烷软管组件》.pdf

SAE AS 4801B-2007 HOSE ASSEMBLY LINED SILICONE 125 PSI FIXED CAVITY COUPLING POTABLE WATER STRAIGHT FEMALE TO 90 EMALE《直内螺纹对90内螺纹饮用水用固定空腔耦合的125psi内衬硅软管组件》.pdf

SAE AS 4802C-2010 HOSE ASSEMBLY LINED SILICONE 125 PSI FIXED CAVITY COUPLING POTABLE WATER STRAIGHT MALE TO 45 DEGREES FEMALE《阳性直通对阴性45的饮用水固定空腔耦合125 psi内衬硅胶软管总成》.pdf

SAE AS 4803C-2010 HOSE ASSEMBLY LINED SILICONE 125 PSI FIXED CAVITY COUPLING POTABLE WATER STRAIGHT MALE TO 90 DEGREES FEMALE《阳性直通对阴性90度的饮用水固定腔耦合125 psi硅内衬软管总成》.pdf