TS 2876-1977 Vulcanized Rubbers Of High Hardness (85 To 100 IRHD) Determination Of Hardness《高硬度硫化橡胶的硬度测试（85至100IRHD）》.pdf

相关资源

JIS K6257-2003 硫化橡胶和热塑性橡胶 热老化性能测定.pdf

JIS K6258-2003 硫化橡胶和热塑性橡胶 耐液体性能测定.pdf

JIS K6403-1999 汽车用硫化橡胶的分类系统.pdf

JIS K6254-2003 硫化橡胶和热塑性橡胶 低伸长应力-应变性能测定.pdf

JIS K6255-1996 硫化橡胶和热塑性橡胶 弹性性能测试方法.pdf

JIS K6226-2-2003 橡胶和橡胶制品.用热重量分析法测定硫化橡胶和未硫化化合物的成分.第2部分丙烯腈丁二烯和卤丁基橡胶.pdf

JIS K6256-1999 硫化橡胶和热塑性橡胶 粘接性能测试方法.pdf

JIS K6262-1997 硫化橡胶和热塑性橡胶 固定伸张试验方法.pdf

JIS K6253-1997 硫化橡胶和热塑性橡胶 硬度试验方法.pdf

JIS K6270 2001 硫化橡胶和热塑性橡胶—拉伸疲劳特性的测定方法—定应变法.pdf

猜你喜欢

ASTM D5876-1995(2005) Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Qua.pdf

ASTM D5876-1995(2012)e1 7500 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Wa.pdf

ASTM D5878-2005 Standard Guide for Using Rock Mass Classification Systems for Engineering Purposes《工程技术用岩石质量分级系统的使用标准指南》.pdf

ASTM D5879 D5879M-2018 red 6875 Standard Practice for Surface Site Characterization for On-Site Septic Systems.pdf

ASTM D5879-1995(2003) Standard Practice for Surface Site Characterization for On-Site Septic Systems《现场腐化装置的地点表面特征的标准实施规程》.pdf

ASTM D5879-1995(2010) 9375 Standard Practice for Surface Site Characterization for On-Site Septic Systems《现场腐化装置的地点表面特征的标准实施规程》.pdf

ASTM D5881-1995(2005) Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous C.pdf

ASTM D5881-2013 7861 Standard Test Method for &40 Analytical Procedure&41 Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneo.pdf

ASTM D5882-2007 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations《深层地基的低应变冲击完整性测试用标准试验方法》.pdf