UNE 55-522-1991 Surface active agents Determination of rheological behaviour using a rotational viscometer《旋转粘度计流变性的测定》.pdf

相关资源

JIS K5101-6-2-2004 颜料试验方法.第6部分：流动性.第2节旋转粘度计法.pdf

JJG (石油)17-1991 钻井液旋转粘度计.pdf

JJG 215-1981 旋转粘度计检定规程（试行）.pdf

HG T 3323-1982 橡胶浆粘度测定方法（旋转粘度计法）.pdf

HG 4-1470-1982 橡胶浆粘度测定方法（旋转粘度计法）.pdf

JB T 9357-1999 实验室旋转粘度计 通用技术条件.pdf

SY T 0520-1993 原油粘度测定旋转粘度计平衡法.pdf

SY T 0520-2008 原油粘度测定 旋转粘度计平衡法.pdf

SY T 0522-1993 原油析蜡点测定旋转粘度计法.pdf

SY T 0522-2008 原油析蜡点测定 旋转粘度计法.pdf

猜你喜欢

BS A 353-2000 Inserts with self-locking floating nut with MJ threads in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套 尺寸》.pdf

BS A 354-2000 Inserts self-locking with MJ threads closed type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的封闭式MJ螺纹的自锁衬套 尺寸》.pdf

BS A 355-2000 Inserts self-locking with MJ threads open type in metallic material coated or uncoated - Dimensions《涂覆或未涂覆的金属材料制的开放式MJ螺纹自锁衬套 尺寸》.pdf

BS A 356-2000 Inserts self-locking with MJ threads reduced flanges closed type in metallic material coated or uncoated - Dimensions《覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套 尺寸》.pdf

BS A 357-2000 Inserts with clearance hole in metallic material coated or uncoated - Dimensions《金属材料制的涂覆或未涂覆的带间隙孔的衬套 尺寸》.pdf

BS A 358-1-2000 MJ threads - General requirements《MJ螺纹 一般要求》.pdf

BS A 358-2-2000 MJ threads - Limit dimensions for bolts and nuts《MJ螺纹 螺栓和螺母的极限尺寸》.pdf

BS A 358-3-2000 MJ threads - Limit dimensions for fittings for fluid systems《MJ螺纹 流体系统用的接头的极限尺寸》.pdf

BS A 359-2000 Nuts barrel self-locking floating with MJ threads classifications - 900 MPa (at ambient temperature) 235 C 1100 MPa (at ambient temperature) 235 C 1250 MPa (at ambien.pdf