UNE 55-911-1994 《肥皂和含有肥皂的物品 样品和化学分析 第1部分：样品的获取和准备》.pdf

相关资源

JIS G1602-1998 铁合金化学分析取样方法(第2部分钨铁、钼铁、钒铁、钛铁和铌铁合金).pdf

JIS G1603-1985 合金化学分析的取样方法(第3部分 磷铁、金属锰、金属硅、金属铬、硅钙及硼铁合金).pdf

JIS H6202-1986 化学分析用铂蒸发器.pdf

JIS G1326-2000 镍铁化学分析方法-解释.pdf

JIS G1301-1987 铁合金化学分析方法通则.pdf

JIS G1320-1968 磷铁化学分析方法.pdf

JIS H6201-1986 化学分析用铂坩埚.pdf

JIS H1012-2001 铜及铜合金的化学分析方法通则.pdf

JIS H1402-2001 钨粉及碳化钨粉的化学分析方法.pdf

JIS H1402-2006 钨粉及碳化钨粉的化学分析方法(修改件1).pdf

猜你喜欢

NASA NACA-RM-A51C14-1951 A semi-empirical method for calculating the pitching moment of bodies of revolution at low Mach numbers《在低马赫数时回转体俯仰力矩的半经验计算方法》.pdf

NASA NACA-RM-A51D02-1951 Investigation in the Ames 12-foot pressure wind tunnel of a model horizontal tail of aspect ratio 3 and taper ratio 0 5 having the quarter-chord line swept.pdf

NASA NACA-RM-A51D25-1951 Low-speed characteristics of a wing having 63 degrees sweepback and uniform camber《带有63后掠角和均匀弧度的机翼低速特性》.pdf

NASA NACA-RM-A51D27-1951 Characteristics throughout the subsonic speed range of a plane wing and of a cambered and twisted wing both having 45 degrees of sweepback《拱形和扭转机翼的飞机机翼(均有4.pdf

NASA NACA-RM-A51G31-1951 The forces and pressure distribution at subsonic speeds on a plane wing having 45 degrees of sweepback an aspect ratio of 3 and a taper ratio of 0 5《在亚音速下 .pdf

NASA NACA-RM-A51H02-1951 Lift drag and pitching moment of low-aspect-ratio wings at subsonic and supersonic speeds - plane triangular wing of aspect ratio 3 with NACA 0003-63 secti.pdf

NASA NACA-RM-A51J11-1951 The effects at transonic speeds of thickening the trailing edge of a wing with a 4-percent-thick circular-arc airfoil《在跨音速下 将带有4%厚度圆弧机翼的机翼后缘增厚的效果》.pdf

NASA NACA-RM-A51L03-1952 Tests in the Ames 40- by 80-foot wind tunnel of an airplane configuration with an aspect ratio 2 triangular wing and an all-movable horizontal tail latera.pdf

NASA NACA-RM-A52B20-1952 The effects of Reynolds number at Mach numbers up to 0 94 on the loading on a 35 degree swept-back wing having NACA 65(1)A012 streamwise sections《在马赫数达到0 9.pdf