UNE 7 099 《石灰和石灰岩中二氧化碳和水由于煅烧而产生的总损失的确定》.pdf

相关资源

JIS K1106-1990(2008) 液态二氧化碳.pdf

JIS A1406-1974 室内通风量的测定方法(二氧化碳法).pdf

JIS D1030-1998 汽车.汽车排气中一氧化碳、二氧化碳和碳氢化合物浓度的连续测定方法.pdf

JIS Z 3320-1999 AMD 1-2007 耐大气腐蚀钢的二氧化碳气体保护弧焊用.pdf

CB T 3621-1994 二氧化碳灭火系统模拟试验质量要求.pdf

AQ 1052-2008 矿用二氧化碳传感器通用技术条件.pdf

DL 450-1991 绝缘油中含气量的测试方法（二氧化碳洗脱法）.pdf

CB T 3294-1998 船用二氧化碳灭火装置.pdf

DL T 502.8-2006 火力发电厂水汽分析方法 第8部分 游离二氧化碳的测定（固定法）.pdf

DZ T 0184.21-1997 天然水中氧同位素的二氧化碳——水平衡法测定.pdf

猜你喜欢

ASD-STAN PREN 3454-1995 Aerospace Series Titanium Alloy TI-P19001 not Heat Treated Grade 2 Forging Stock for Annealed Forgings a or D Less Than or Equal to 300 mm (Edition P2)《航空航天.pdf

ASD-STAN PREN 3455-1995 Aerospace Series Titanium Alloy TI-P19001 not Heat Treated Grade 2 Forging Stock for Solution Treated and Aged Forgings a or D Less Than or Equal to 300 mm .pdf

ASD-STAN PREN 3456-2010 Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Sheet and strip hot rolled a less than or equal to 6 mm (Edition P 3)《航空航天系列 a≤6mm的钛合金TI-P640.pdf

ASD-STAN PREN 3460-1996 Aerospace Series Titanium TI-P99002 Annealed Bar for Machining a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 390 MPa (Edition P 2)《航空航天系列 .pdf

ASD-STAN PREN 3461-1994 Aerospace Series Titanium TI-P99003 Annealed Bar for Machining D Less Than or Equal to 150 mm 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa.pdf

ASD-STAN PREN 3462-1994 Aerospace Series Titanium Alloy TI-P19001 Annealed Bar for Machining D Less Than or Equal to 150 mm (Edition P 2)《航空航天系列 D≤150mm的切削加工用钛合金TI-P19001退火棒材 第P2版》.pdf

ASD-STAN PREN 3463-1994 Aerospace Series Titanium Alloy TI-P19001 Solution Heat Treated and Aged Bar for Machining D Less Than or Equal to 75 mm (Edition P 2)《航空航天系列 D≤75mm的切削加工用钛合.pdf

ASD-STAN PREN 3465-1995 Aerospace Series Titanium Alloy TI-P63001 not Heat Treated Grade 2 Forging Stock for Solution Treated and Aged Forgings a or D Less Than or Equal to 360 mm .pdf

ASD-STAN PREN 3466-1988 Titanium Alloy TI-P68 Solution Treated and Aged Rm Greater Than or Equal to 1000 MPa Bar for Machining De Less Than or Equal to 150 mm《切削加工用钛合金TI-P68制De≤150.pdf