UNE 7-470-1987 《无破坏性的试验 目视检查的建议》.pdf

相关资源

GB T 20967-2007 无损检测 目视检测 总则.pdf

JB T 11601-2013 无损检测仪器 目视检测设备.pdf

GB T 32259-2015 焊缝无损检测 熔焊接头目视检测.pdf

CNS 12847-1991 General Rules for Visual Testing《目视检测法通则》.pdf

GB T 34370.2-2017 游乐设施无损检测 第2部分：目视检测.pdf

GOST R EN 13018-2014 Visual testing General principles《目视检测 通用原则》.pdf

JB T 12530.2-2015 塑料焊缝无损检测方法 第2部分 目视检测.pdf

NB T 47013.7-2012 承压设备无损检测.第7部分：目视检测.pdf

NY T 3019-2009 1875 Nondestructive testing for aircraft visual testing《航空器无损检测 目视检测》.pdf

DB21 T 3787-2023 非洲猪瘟病毒LAMP目视检测方法.pdf

猜你喜欢

JUS M A1 025-1981 Surface roghness of industrial products Correlation bettveen surface roughness grade numbers and to- grade lerance grades《工业产品表面粗糙程度 表面粗糙与粗糙等级及配合公差的关系》.pdf

JUS M A1 026-1981 Sur face roghness ofindustrial products Correlation between the surface roughness and surface finishing process《工业产品表面粗糙程度 表面粗糙与表面加工处理的关系》.pdf

JUS M A1 027-1981 Surface roughness ofindustrial products Classification ofscraped surfaces 《工业产品表面粗糙程度 刮痕表面的分类》.pdf

JUS M A1 031-1982 Instruments for the measurement of surface roughness by the profile method Contactprofile meters system M《表面粗糙测量仪器 轮廓法 轮接触仪器，系统 M》.pdf

JUS M A1 032-1980 Classification of imtruments and devices for measurement and evaluation of the geometrical parameters of surface finish《仪器分类及表面加工几何参数测量及估测仪器》.pdf

JUS M A1 034-1980 Instruments for the measurement of surface roughness by tne profil method-contact (stylus) instrument of profile transformation - Profile reoording instruments《表面.pdf

JUS M A1 041-1980 Roughness comparisan specimens Turned ground bored milled shapedandplaned《表面粗糙测量仪器 旋转、接地、钻孔、磨制、成型及平整》.pdf

JUS M A1 042-1980 Rougtiness comparisan specimens spark-eroded shot blasted and grit blasted and polished《粗糙对比样品，火花侵蚀和喷砂和抛光》.pdf

JUS M A1 043-1982 Roughness camparison specimens Gast surfaces《粗糙对比样品 盖斯特（Gast）表面》.pdf