2018年秋八年级物理上册第五章第3节凸透镜成像的规律课件(新版)新人教版.ppt

上传人:李朗 文档编号:1148941 上传时间:2019-05-11 格式:PPT 页数:19 大小:2.81MB
下载 相关 举报
2018年秋八年级物理上册第五章第3节凸透镜成像的规律课件(新版)新人教版.ppt_第1页
第1页 / 共19页
2018年秋八年级物理上册第五章第3节凸透镜成像的规律课件(新版)新人教版.ppt_第2页
第2页 / 共19页
2018年秋八年级物理上册第五章第3节凸透镜成像的规律课件(新版)新人教版.ppt_第3页
第3页 / 共19页
2018年秋八年级物理上册第五章第3节凸透镜成像的规律课件(新版)新人教版.ppt_第4页
第4页 / 共19页
2018年秋八年级物理上册第五章第3节凸透镜成像的规律课件(新版)新人教版.ppt_第5页
第5页 / 共19页
点击查看更多>>
资源描述

1、第五章 透镜及其应用,第3节 凸透镜成像的规律,一、新课引入,生活中的凸透镜能成什么样的像?,倒立、放大的实像,倒立、缩小的实像,正立、放大的虚像,观察与思考,二、新课讲解,观察凸透镜成像,(1)手持凸透镜,缓慢从桌面书本移向眼睛。,思考:,你看到了什么? 有多少种不同的情况?,(2)把放大镜正对着 窗户外,并且在放大镜 另一侧比较靠近的位置前后移动光屏,观察是否能在光屏上找到窗外景物的像?,倒立放大的实像,倒立缩小的实像,正立放大的虚像,投影片(物),现象:,问题:,猜想:,凸透镜能成不同特点的像。,像的正倒、大小、虚实可能跟哪些因素有关?,(像),倒立放大的实像,倒立缩小的实像,正立放大的

2、虚像,远,较近,更近,现象:,凸透镜能成不同的像。,问题:,猜想:,实验,像的正倒、大小、虚实跟物体到凸透镜的距离有关,像的正倒、大小、虚实可能跟哪些因素有关?,像的虚、实,大、小,正、倒跟物距有什么关系呢?,探究问题,实验方案,(1)实验器材:,烛焰、透镜、光屏三者的中心处于同一水平高度。,(2)两个物理名词及实验前的调节:,凸透镜、蜡烛、光屏、火柴、光具座,组装实验装置,将烛焰中心、凸透镜中心和光屏中心调整到同一高度。将凸透镜固定在光具座中间某刻度处,把蜡烛放在较远处,使物距u2f,调整光屏到凸透镜的距离,使烛焰在光屏上成清晰的实像。观察实像的大小和正倒。记录物距u和像距v。,实验步骤,把

3、蜡烛向凸透镜移近,改变物距u,仍使u2f, 仿照步骤 再做2次实验,分别观察实像的大小 和正倒。记录物距u和像距v。,把蜡烛向凸透镜移近,改变物距u,使fu2f,调使烛焰在光屏上成清晰的实像。观察实像的大小和正倒。记录物距u和像距v。,把蜡烛向凸透镜移近,改变物距u,使fu2f,仿照步骤 再做2次试验,分别观察实像的大小和正倒。记录物距u和像距v。把蜡烛向凸透镜移近,改变物距u,使uf,在光屏上不能得到蜡烛的像,此时成虚像,应从光屏这侧向透镜里观察蜡烛的像,观察虚像的大小和正倒。,凸透镜焦距f cm,实验表格,分析表中的记录,找出凸透镜成像的规律,uf 时成实像,uf 时成虚像。(一倍焦距点分

4、虚实 ),(1)像的虚实:凸透镜在什么条件下成实像?在什么条件下成虚像?,(2)像的大小:凸透镜在什么条件下成缩小的实像?在什么条件下成放大的实像?有没有缩小的虚像?,uv时,得到缩小实像; uv时,得到放大实像。,分析与论证,当uv2f 时成等大的实像。 二倍焦距点分大小。(没有缩小的虚像。 ),(3)像的正倒:凸透镜在什么条件下成正立的像?在什么条件下成倒立的像?,uf 时成实像,是倒立的;,uf 时成虚像,是正立的。,当物距“很远”时,相距近似等于焦距。,重要应用:远物成像粗测焦距。“傻瓜相机”成像原理。,1照相机是根据什么原理工作的?,照相机是根据物体距凸透镜大于2倍焦距的原理制成的。,2幻灯机是根据什么原理工作的?,幻灯机是根据物体距凸透镜大于焦距小于2倍焦距的原理制成的。,三、归纳小结,、这节课经历了哪几个探究过程?,提出问题,做出猜想,设计实验,实验验证,分析论证,实验评估,实践应用,、你能总结出凸透镜成像的规律吗?,四、强化训练,如图所示,画出了光线经过透镜前后的方向,则在虚线处的透镜应是( ),凹透镜,

展开阅读全文
相关资源
猜你喜欢
  • DIN EN ISO 13438-2005 Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438 2004) German version EN ISO 13438 2.pdf DIN EN ISO 13438-2005 Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438 2004) German version EN ISO 13438 2.pdf
  • DIN EN ISO 13443-2007 Natural gas - Standard reference conditions (ISO 13443 1996 including Corrigendum 1 1997) English version of DIN EN ISO 13443 2007-09《天然气 标准参比条件(ISO 13443 199.pdf DIN EN ISO 13443-2007 Natural gas - Standard reference conditions (ISO 13443 1996 including Corrigendum 1 1997) English version of DIN EN ISO 13443 2007-09《天然气 标准参比条件(ISO 13443 199.pdf
  • DIN EN ISO 13445-2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445 2003) English version of DIN EN IS.pdf DIN EN ISO 13445-2006 Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445 2003) English version of DIN EN IS.pdf
  • DIN EN ISO 1346-2012 Fibre ropes - Polypropylene split film monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3- 4- 8- and 12- strand ropes.pdf DIN EN ISO 1346-2012 Fibre ropes - Polypropylene split film monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) - 3- 4- 8- and 12- strand ropes.pdf
  • DIN EN ISO 13468-1-1997 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1 Single-beam instrument (ISO 13468-1 1996) German version EN I.pdf DIN EN ISO 13468-1-1997 Plastics - Determination of the total luminous transmittance of transparent materials - Part 1 Single-beam instrument (ISO 13468-1 1996) German version EN I.pdf
  • DIN EN ISO 13468-2-2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 Double-beam instrument (ISO 13468-2 1999) English version of .pdf DIN EN ISO 13468-2-2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 Double-beam instrument (ISO 13468-2 1999) English version of .pdf
  • DIN EN ISO 13473-1-2004 Characterization of pavement texture by use of surface profiles - Part 1 Determination of Mean Profile Depth (ISO 13473-1 1997) German version EN ISO 13473-.pdf DIN EN ISO 13473-1-2004 Characterization of pavement texture by use of surface profiles - Part 1 Determination of Mean Profile Depth (ISO 13473-1 1997) German version EN ISO 13473-.pdf
  • DIN EN ISO 13473-5-2010 Characterization of pavement texture by use of surface profiles - Part 5 Determination of megatexture (ISO 13473-5 2009) German version EN ISO 13473-5 2009《.pdf DIN EN ISO 13473-5-2010 Characterization of pavement texture by use of surface profiles - Part 5 Determination of megatexture (ISO 13473-5 2009) German version EN ISO 13473-5 2009《.pdf
  • DIN EN ISO 13477-2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (IS.pdf DIN EN ISO 13477-2008 Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (IS.pdf
  • 相关搜索

    当前位置:首页 > 教学课件 > 中学教育

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1